Mechanism and rate constants of the CH2 + CH2CO reactions in triplet and singlet states: A theoretical study

Ab initio and density functional CCSD(T)-F12/cc-pVQZ-f12//B2PLYPD3/6-311G** calculations have been performed to unravel the reaction mechanism of triplet and singlet methylene CH₂ with ketene CH₂CO. The computed potential energy diagrams and molecular properties have been then utilized in Rice–Ramsperger–Kassel–Marcus-Master Equation (RRKM-ME) calculations of the reaction rate constants and product branching ratios combined with the use of nonadiabatic transition state theory for spin-forbidden triplet-singlet isomerization. The results indicate that the most important channels of the reaction of ketene with triplet methylene lead to the formation of the HCCO + CH₃ and C₂H₄ + CO products, where the former channel is preferable at higher temperatures from 1000 K and above. In the C₂H₄ + CO product pair, the ethylene molecule can be formed either adiabatically in the triplet electronic state or via triplet-singlet intersystem crossing in the singlet electronic state occurring in the vicinity of the CH₂COCH₂ intermediate or along the pathway of CO elimination from the initial CH₂CH₂CO complex. The predominant products of the reaction of ketene with singlet methylene have been shown to be C₂H₄ + CO. The formation of these products mostly proceeds via a well-skipping mechanism but at high pressures may to some extent involve collisional stabilization of the CH₃CHCO and cyclic CH₂COCH₂ intermediates followed by their thermal unimolecular decomposition. The calculated rate constants at different pressures from 0.01 to 100 atm have been fitted by the modified Arrhenius expressions in the temperature range of 300–3000 K, which are proposed for kinetic modeling of ketene reactions in combustion. © 2018 Wiley Periodicals, Inc.     

A modified simplex method for multifactor optimization of selectivity in gas chromatography

A computer-assisted advanced simplex method is presented for the simultaneous optimization of multifactor ( stationary phase loading, carrier gas flow rate and column temperature ) for separation of ten compounds in gas chromatography. A three factors factorial design was used. The method was based on a special polynomial established from fifteen preliminary runs, using resolution as the selection criterion, with connection to a general simplex method. Excellent agreement is found between the predicted data and the experimental results, and most of experiments required in the general simplex method can be omitted.     

热致液晶聚酯酰亚胺的非等温相转变动力学研究

以差示扫描量热法对热致液晶聚酯酰亚胺的结晶过程和液晶化过程的非等温相转变动力学行为进行了初步研究，根据Ｊｅｚｉｏｒｎｙ方法处理数据得到了表征聚合物非等温相转变动力参数Ｚｃ，Ｇｃ并对其进行了讨论，结果表明，在所研究的条件下聚合物的相转变过程基本上符事Ｊｅｚｉｏｒｎｙ结论，但两种相转变的成核与生长方式是不同的。     

氯化聚乙烯对甲基丙烯酸甲酯／苯乙烯共聚动力学的影响

将甲基丙烯酸甲酯（ＭＭＡ）／苯乙烯（Ｓ）在氯化聚乙烯（ＣＰＥ）存在下进行悬浮溶胀接枝共聚，考察了ＣＰＥ对ＭＭＡ／Ｓ共聚动力学行为的影响．ＣＰＥ提高了聚合体系的粘度，使自动加速提前，扩散因素增加，对共聚有阻滞作用．ＣＰＥ是链转移剂，使ＭＭＡ／Ｓ共聚物分子量降低．ＣＰＥ对ＭＭＡ的吸附渗透优于对Ｓ的吸附，造成接技部分与非接技部分组成的差异．ＣＰＥ含量、溶胀时间、转化率、硫酸用量对共聚组成均有影响。     

过硫酸胺与N－［（3－二甲氨基）丙基］丙烯酰胺氧化还原引发体系的研究

过硫酸胺与Ｎ－［（３－二甲氨基）丙基］丙烯酰胺氧化还原引发体系的研究司堃，郭新秋，丘坤元（北京大学化学与分子工程学院北京１００８７１）关键词Ｎ－取代丙烯酰胺，氧化还原体系，反应动力学，端基分析，反应机理Ｎ－［（３一二甲氨基）两基］丙烯酸胺（ＤＭＡＰＡ...     

直接酯化法合成PET反应条件对树脂结晶速率的影响

用直接酯化法合成了聚对苯二甲酸乙二酯（ＰＥＴ）。对缩聚反应温度、真空度及稳定剂等合条件对产物结晶速率的影响进行了研究。以ΔＴｃ＝Ｔｃ－Ｔｇ和ΔＴｃｏ＝Ｔｃｏ－Ｔｇ表征样品的结晶速率。结果表明，真空度一定，反应温度高则样品结晶速率慢；温度一定，真空度高样品结晶速率也慢。这两个因素的影响均是不可忽视的。     

Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems

Melt or cold crystallization kinetics has a strong bearing on morphology and the extent of crystallization, which significantly affects the physical properties of polymeric materials. Nonisothermal crystallization kinetics are often analyzed by the classical Johnson–Mehl–Avrami–Kolmogorov (JMAK) model or one of its variants, even though they are based on an isothermal assumption. As a result, during the nonisothermal (e.g. constant heating or cooling rate) crystallization of polymeric material, different sets of model parameters are required to describe crystallization at different rates, thereby increasing the total number of model parameters. In addition, due to the uncorrelated nature of these model parameters with the cooling or heating rate, accurate modeling at any intermediate condition is not possible. In the present work, these two limitations of the conventional approach have been eliminated by exhibiting the existence of a functional relationship between cooling or heating rate and effective activation energy during nonisothermal melt or cold crystallization in three linear aromatic polyesters. Furthermore, it has been shown that when the JMAK model is used in conjunction with this functional relationship, it is possible to precisely predict the experimental nonisothermal melt or cold crystallization kinetics at any linear cooling or heating rate with a single set of model parameters.     

Theoretical study and rate constant calculation for the reactions of SH (SD) with Cl2, Br2, and BrCl

The mechanisms of the SH (SD) radicals with Cl2 (R1), Br2 (R2), and BrCl (R3) are investigated theoretically, and the rate constants are calculated using a dual-level direct dynamics method. The optimized geometries and frequencies of the stationary points are calculated at the MP2/6-311G(d,p) and MPW1K/6-311G(d,p) levels. Higher-level energies are obtained at the approximate QCISD(T)/6-311++G(3df, 2pd) level using the MP2 geometries as well as by the multicoefficient correlation method based on QCISD (MC-QCISD) using the MPW1K geometries. Complexes with energies less than those of the reactants or products are located at the entrance or the exit channels of these reactions, which indicate that the reactions may proceed via an indirect mechanism. The enthalpies of formation for the species XSH/XSD (X = Cl and Br) are evaluated using hydrogenation working reactions method. By canonical variational transition-state theory (CVT), the rate constants of SH and SD radicals with Cl2, Br2, and BrCl are calculated over a wide temperature range of 200-2000 K at the a-QCISD(T)/6-311++G(3df, 2pd)//MP2/6-311G(d, p) level. Good agreement between the calculated and experimental rate constants is obtained in the measured temperature range. Our calculations show that for SH (SD) + BrCl reaction bromine abstraction (R3a or R3a') leading to the formation of BrSH (BrSD) + Cl in a barrierless process dominants the reaction with the branching ratios for channels 3a and 3a' of 99% at 298 K, which is quite different from the experimental result of k3a'/k3' = 54 +/- 10%. Negative activation energies are found at the higher level for the SH + Br2 and SH + BrCl (Br-abstraction) reactions; as a result, the rate constants show a slightly negative temperature dependence, which is consistent with the determination in the literature. The kinetic isotope effects for the three reactions are "inverse". The values of kH/kD are 0.88, 0.91, and 0.69 at room temperature, respectively, and they increase as the temperature increases.     

Large‐scale Experimental Study on the Effects of Flooring Materials on Combustion Behavior of Thermoplastics

The effects of flooring materials on the combustion behavior of thermoplastics is investigated. Based on the ISO 9705 fire test setup, an experimental rig was designed. Full‐scale experiments of PP combustion were carried out using five flooring boards, namely gypsum, steel, wood, ceramic tile and PVC. The experimental results indicate that the flooring boards play an important role in the heat release rates of typical thermoplastics combustion. Specifically, the time for the sharp increase of heat release rate is generally later for the flooring boards with larger thermal conductivity, except for the case of PVC. Preliminary analyses suggest that the reason for the exception of PVC is the expansion and carbonization of PVC at high temperature. In addition, experimental results also show that the corresponding peak heat release rate of thermoplastics combustion would be generally smaller for the flooring board with a larger thermal mass, except for the case of gypsum. The primary cause for the exception of gypsum may be the heat absorption by the crystal water released from the gypsum during the burning of hot pool oil.     

富锂层状正极材料Li2Mn1-xTixO3的合成及电化学性能

应用简单的高温固相烧结法合成了Ti掺杂改性的Li₂MnO₃材料。电子扫描显微镜、X射线衍射以及X射线光电子能谱分析表明Ti元素取代Mn离子掺入到Li₂MnO₃晶格中,且掺杂能有效地抑制一次颗粒的团聚。电化学阻抗和恒流充放电测试结果表明,在2.0~4.6 V的电压窗口下,掺杂改性的样品Li₂Mn_0.9Ti_0.03O₃的首圈放电比容量达到209 mAh·g^-1,库仑效率为99.5%,循环40圈后容量保持率为94%;当电流密度增大到400 mA·g^-1时,掺杂改性的样品仍然可以放出120 mAh·g^-1比容量,远高于同等电流密度下未掺杂的Li₂MnO₃原粉的比容量（52 mAh·g^-1）。Ti掺杂可有效地改善Li₂MnO₃的循环稳定性和倍率性能,有利于促进该材料的商业化应用。