Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

Synthesis and Structure of Ag_3PSe_4

The title compound Ag3PSe4 was synthesized by the reaction of Ag powder,P2Se5 and Se in a molar ratio of 1:1:1 at 500℃ and structurally characterized by X-ray crystallography.The crystal belongs to orthorhombic,space group Pmn21 with cell parameters:a=7.689(4),b=6.660(3),c=6.379(4)A,V=326.7(3)A^3,Z=2,Dc=6.816g/cm^3,Mr=670.42,F(000)=584,μ=31.302mm^-1,R=0.0606,wR=0.1289 and S=1.012,The 3-D structure can be regarded as constructed from the stacking of puckered Ag-P-Se honeycomb-like sheets along the c direction,in which the Ag,P and Se atoms are bonded to each other to form a chair-like six-membered ring,and the rings then build the sheets by sharing edges.     

Influence of thermal and thermo-mechanical treatment

Two lipids with similar melting ranges but of different composition were analyzed using differential scanning calorimetry and X-ray diffraction. The lipids were processed via extrusion or were tempered at different temperatures; they were analyzed directly after extrusion and after storage at 40°C. Precirol ATO 5® showed high sensitivity to storage time and varied temperature exposure. Extrusion showed only marginal influences on the solid state. Melting peaks were narrower and shifted to higher temperatures in comparison to the untreated powder. Dynasan 114® was more robust, changes in the solid state could only be shown for samples treated above the melting range. Thus, Dynasan 114® is more appropriate for solid lipid extrusion of pharmaceutical products.     

Fiber-in-Tube Solid Phase Extraction (FIT-SPE) for Miniaturized Sample Preparation Process

A typical analytical separation procedure has several important steps: sample preparation, isolation, identification, quantitation, statistical evaluation and final decision. Each step is alwayscritical to obtain correct results to fulfill the analytical purpose. In these various steps sample     

胍类化合物的合成进展

胍类化合物是精氨酸残体的一部分，它在具有生物活性的蛋白质、肽中起着重要作用，从天然产物分离得到的胍类化合物大部分具有生理活性，如抗病毒、抗肿瘤、抗艾滋病等。所以，在温和条件下高产率的合成胍类化合物显得非常重要。本文综述了胍类化合物的合成进展。参考文献32篇。     

NOx在固体电解质电解池上的电化学消除

 综述了近年来利用固体电解质电解池消除NO的研究进展．重点总结了电化学消除NO研究体系、电化学消除NO分解机制、O2－在固体电解质电解池中传导的控速步骤、电极种类和形态对NO分解性能的影响以及直流与交流电作用的差异等几个方面的研究结果．在RuO2—Ag—YSZ—Pd电解池上实现的NO选择性分解是迄今为止的最佳结果，500℃下NO的转化率为31．8％，NO的分解活性是O2的分解活性的13倍．该领域今后研究的主要方向是，进一步提高NO分解相对于共存O2离子化的选择性、降低O2－在阴极界面处的传导阻力和探寻可在更低温度传导O2－的新的固体电解质     

COORDINATION COPOLYMERIZATION OF STYRENE WITH MALEIC ANHYDRIDE BY RARE-EARTH COORDINATION CATALYSTS

The study on coordination copolymerization of styrene (S) with maleic anhydride (MA) by rare-earth coordination catalysts, NdL_3-Al(i-Bu)_3, has been successfully carried out for the first time. Some features, kinetic behavior, and mechanism of the SMA copolymerization by Nd(naph)_3-Al(i-Bu)_3 system are described and discussed. The copolymex of styrenemaleic anhydride prepared by the NdL_3-Al(i-Bu)_3 systems in benzene at 50℃ is an alternating-rich white powder having high number-average molecular weight of 6—8.5×10~5. The overall activation energy for the polymerization was found to be 10.5KJ/mol. The polymerization was not suppressed by addition of hydroquinone. The catalytic activity of various ligands in NdL_3 for the copolymerization decreases in the following order: Nd (naph)_3>Nd-(P_(507))_3～NdCl_3-6H_2O>Nd(P_(204))_3>Nd(acac)_3. 3H_2O. The experimental results are explained based on a mechanism to be the coordination-type copolymerization in terms of the participation of a monomer-monomer c     

杯芳烃的配位化学──Ⅳ.对叔丁基杯[8]芳烃与钙、镉配合物的合成与表征

本文合成了对叔丁基杯[8]芳烃(H₈L)与钙、镉的固体配合物。并以元素分析、核磁共振、热谱、红外谱、紫外谱等进行表征。其配合物的组成分别为Ca(H₆L)·6dmf及Cd(H₆L)·6dmf.     

低温陈化法制备SO_4~(2-)/WO_3-TiO_2固体超强酸及性能研究

0引言固体超强酸的研制是近20年来催化领域中的热点研究课题之一。起初,人们所研制的SO42-/MxOy型固体超强酸中,MxOy多为ZrO2。近年来,研究者们为得到高酸强度和高催化活性的固体超强酸催化剂,以ZrO2为主体,引入第二组分、第三组分组成复合型催化剂,这方面的研究者颇多[1~4],也     

Solid state reactions of nitrogenous heterocyclic compounds(Ⅰ)——Solid state reactions of 3-methyl-l-phenyl-5-pyrazolone with carbonyl compounds

The solid state reaction of 3-methyl-1-phenyl-5-pyrazolone (MPP) with aromatic aldehydes and ke-tones benzil derivatives and imides,and the solid state Michael addition reaction of MPP with 4-arylidene-3-methyl-1-phenyl-5-pyrnzolone 2 were investigated.Some new solid state reactions between the reactants were found,from which a series of new compounds were obtained The structures of the products were identified by IR,1H NMR,MS,elemental analyses and also by X-ray crystal analysis,and the reaction mechanism of MPP with aromatic aldehydes and ketones was proposed