Structure of the blue forms of bisphthalocyanines of rare-earth elements

Using electron spectroscopy, X-ray photoelectron spectroscopy, and ESR spectroscopy, the blue forms of bisphthalocyanines of rare-earth elements were found to have structures of sandwich-type complexes with isoelectronic phthalocyanine ligands linked with tetravalent metal ions, [Pc^2–Ln⁴⁺Pc^2–]⁰. A comparative spectral and electrochemical study of the blue and green forms oftert-butyl-substituted bisphthalocyanines was carried out for almost the whole series of rare-earth metals. Lutetium octa(perfluoro-tert-butyl)- and perchlorobisphthalocyanines were synthesized for the first time.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 425–430, March, 1995.This study was financially supported by the Russian Foundation for Basic Research (grant No. 94-03-08903).     

纳米复合固体超强酸SO42-/ZnFe2O4的制备与催化合成癸二酸二乙酯的研究

以硫酸盐为原料,添加NaOH和NaHCO₃以制备出碱式碳酸盐前驱体,合成出新型的纳米固体超强酸催化剂SO₄^2-/ZnFe₂O₄,经XRD、BET、IR等检测,粒径为35nm,比表面积很大(137m^2-1),粒度均匀。首次以该固体酸为催化剂,癸二酸和无水乙醇为原料合成癸二酸二乙酯,考察了影响反应的因素。结果表明,醇酸摩尔比为4.0∶1,催化剂用量为1.0g(癸二酸0.1mol),带水剂苯15mL,反应时间2.5h是最佳反应条件,酯化率可达91%,并推断出该催化剂的酸强度-16.02< H_o< -14.52.     

Reactions of isomeric 3,6- and 3,5-di-tert-butyl-ortho-benzoquinones with NH3

The interaction of 3,6-di-tert-butyl-ortho-benzoquinone (1) and 3,5-di-tert-butyl-ortho-benzoquinone (2) with NH₃ in water—alcohol medium and with (NH₄)₂CO₃ in a solid phase has been studied. Redox processes with participation of a nucleophile of the medium take place for1, while2 reacts with NH₃ at the carbonyl group with transformation of the quinone imide. The mechanism of redox transformation of1 has been proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1789–1793, September, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research (Project No. 94-03-08653).     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

高稳定性CaO-ZrO2固体碱催化剂的表征和催化性能

用共沉淀法经高温焙烧制备了CaO摩尔分数从10%至50%的CaO-ZrO₂系列催化剂, 将其应用于碳酸丙烯酯和甲醇酯交换合成碳酸二甲酯过程, 并通过XRD, FT-IR, BET, ICP, CO₂-TPD, XPS等表征手段研究了催化剂的物性及其催化性能随组成变化的的规律. 结果表明, 当CaO摩尔分数高于30%时, 表面出现游离的CaO, 虽然具有强碱性和高活性, 但是稳定性差; 而当CaO摩尔分数低于30%时, Ca^2＋进入ZrO₂晶格, CaO与ZrO₂形成连续固溶体, 并且随着CaO含量的增加, 晶格氧的电荷密度增加, 催化剂的碱性增强, 使得CaO-ZrO₂催化剂在碳酸丙烯酯和甲醇酯交换合成碳酸二甲酯过程中获得了高活性和高稳定性.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

超强酸性室温离子液体反应介质中烷烃羰化研究

在卤化1-烷基吡啶和1-甲基-3-烷基咪唑季胺盐与无水AlCl_3组成的超强酸性 氯铝酸室温离子液中，首次实现了烷烃与CO的直接羰化反应。2，2，4-甲基戊烷可 直接与CO反应，产物为酮。     

过渡金属与二取代冠醚固态配合物的制备

由４＇，５＇－二碘苯并１５冠５，４＇，５＇－二溴苯并１５冠５，４＇－溴－５＇－硝基苯并１５冠５，四溴二苯并１８冠６与过渡全属Ｍｎ（Ⅱ）、Ｃｏ（Ⅱ）、Ｃｕ（Ⅱ）、Ｚｎ（Ⅱ）、Ａｇ（Ⅱ）、Ｃｄ（Ⅱ）的硝酸盐、高氯酸盐、气化物合成了１９个未见报道的固态配合物。用元素分析、红外光谱、摩尔电导和差热－热重分析等表征了它们的组成和性质。     

CFB煤燃烧/热解双反应器中热解室对立管内气固流动特性的影响

考察了循环流化床煤燃烧/热解双反应器系统中热解室的存在对立管内的压力分布及气固流动状况的影响。提升管的内径100 mm、高6 m，立管的内径44 mm、高3 m，热解室的截面积200 mm×200 mm、高770 mm。结果表明，随着提升管内表观气速Ur的增加，有无热解室立管内均为负压差流动，负压差梯度随着Ur的增加而减小。有热解室时，热解室内要保持一定的料位高度，整个立管内固体颗粒的流动为负压差移动床流动；没有热解室时，立管内为稀相流动和移动床流动同时存在，立管内平衡料柱高度随Ur的增加而升高。随着循环量Gs的增加，两种类型的立管内负压差梯度均随之增大，也存在着流动形态的差别。循环量Gs的增加会引起立管内平衡料柱高度的降低。立管内气固相对滑移速度也随着循环量Gs的增加而增大。