稀土钨青铜K0.71Nd0.028WO3的制备及其电性能

Tetragonal tungsten bronze K_0.71Nd_0.028WO₃ was synthesized by rare earth co-permeation method using Keggin type POMs of α-K₁₀[SiCu₃(OH₂)W₉O₃₇]·6H₂O (abbreviated as SiW₉Cu₃) as precursor. XRD, XPS, XRF, TG-DTA were used to characterize the resulting material. The XPS results indicate that Nd has permeated and diffused into the body of the sample and exists in tungsten bronze in the form of K_0.71Nd_0.028WO₃. The results of TG-DTA show that K_0.71Nd_0.028WO₃ begins to decompose at 320 ℃. The consequence of DC four-probe shows that the conductivity of the sample permeated by rare earth is 10³ times higher than that of the sample only permeated by methanol at room temperature. The conductivity of the sample only permeated by methanol is only 10^-3 S·cm^-1 but the conductivity of the sample permeated by rare earth is 1.65 S·cm^-1.     

Synthesis, characterization, photoluminescence and electroluminescence properties of new 1,3,4-oxadiazole-containing rhenium（I） complex Re（CO）3（Bphen）（PTOP）

A new 1,3,4-oxadiazole-contanining rhenium(I) complex,with the formula [Re(CO)_3(Bphen)(PTOP)],(Bphen=bathophe- nardine,PTOP=4-(5-p-tolyl-1,3,4-oxadiazd-2-yl)pyridine),is synthesized and characterized by elemental analysis,IR,~1H NMR, UV-vis and luminescence spectroscopy.The double-layer electroluminescence devices based on the Re(I) complex have been fabricated by spin-coating technique.The turn-on voltage,maximum efficiency,and brightness for green emission obtained from the devices are 9V,2.1cd/A and 165cd/m~2,respectively.     

表面电沉积Ni—La2O3复合镀层的Fe26Cr1Mo不锈钢的氧化行为研究

Ｆｅ２６Ｃｒ１Ｍｏ不锈钢在９００℃氧化时，生成的氧化层在冷却过程中大量剥落，经表面共电沉积ＮｉＬａ２Ｏ３复合镀层后，抗热循环能力明显提高。     

双金属氰化物配合物的制备、表征及催化性能

 制备了基于钴氰化锌的双金属氰化物配合物（DMC）催化剂，并\r\n用元素分析、X射线衍射和红外光谱等手段进行了表征，考察了催化剂\r\n的结构与组成对其催化活性的影响以及该催化体系催化环氧烷烃开环聚\r\n合的特点．结果表明，含ZnCl2和叔丁醇的非晶态DMC催化剂具有最高的\r\n催化活性．该催化体系使聚合物的分子量可控，不饱和度很低（＜14μ\r\neq／g），逐步聚合所得到的聚合物的分子量分布较窄（Mn／Mw＜1．4\r\n8）．13CNMR分析结果表明，甲基氧丙环均聚物的链结构具有无规立构\r\n的特点，且链节分布几乎都为头－尾方式．IR分析结果表明，甲基氧丙\r\n环－环氧乙烷共聚物的链结构是无规分布的．     

Thermochemical Properties of Neutral Complexes in Layer Silicates I. [Ni(4-Etpy)4(NCS)2] complex in montmorillonite and pillared montmorillonites

The stoichiometry of thermal decomposition and enthalpy and structural changes were studied for the compounds formed by penetration of [Ni(4-Etpy)4(NCS)2] (I) into Ca-montmorillonite (II) or Cr-, Zr- and Al-pillared analogues (III, IV and V, respectively). The mass fractions of complex I in II, III, IV or V are different. It was found for all studied compounds that the release of L (L=4-Etpy) is a three-step process (-2L, -1L, -1L), and differences occurred in enthalpy changes (δH in kJ per mole of I) corresponding to the individual processes. These differences and the changes in diffraction and spectral properties of the species formed after intercalation are assumed to have their roots in different intramolecular guest-host interactions in the studied compounds. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cd(II) determination in the presence of aqueous micellar solutions

The equilibrium constants and molar absorptivities for the fast formation of a 1:3 complex between cadmium(II) (Cd(II)) and dithizonate anion, in the presence of cationic and non-ionic surfactants, allowed a simple and fast spectrophotometric determination of total cadmium. Indeed, the molar absorptivities of the Cd(II)-dithizone (Dz) complex formed in the presence of the neutral Triton X-100 and cationic cetyltrimethylammonium bromide (CTAB) surfactants are almost twice the value observed in the standard method and the maxima of absorption are shifted by about 40 nm when compared with the standard method. Clearly, the use of neutral and cationic surfactants promotes a higher value of the molar absorptivities of the complex, resulting in an increase in the sensitivity of the method. Application of the method to the desorption of Cd(II) ions from clays is illustrated.     

邻羧基苯甲醛苯甲酰腙稀土配合物的合成和抗氧化活性

通过邻羧基苯甲醛与苯甲酰肼在苯中的缩合反应制备了邻羧基苯甲醛苯甲酰腙 (H2 L)。在水中合成了H2 L的 6种稀土配合物 ,并采用元素分析IR ,UV ,1 HNMR和DTA TG对配合物进行了表征。配合物的分子式为RE(HL2 )·4H2 O (RE =La ,Pr,Nd ,Eu ,Gd和Er) ,配体以四齿参与配位 ,配合物是八配位结构。此外用紫外光谱法测定了配合物对O2 -·自由基的清除率。结果表明邻羧基苯甲醛苯甲酰腙稀土配合物有一定的抗氧化活性 ,对O2 -·自由基的清除率在 8%～ 2 5 %范围内     

稀土改性L沸石在烃类催化裂化催化剂中的应用

采用离子交换的方法制备了一系列复合稀土（含La及Ce）质量分数不同的稀土改性超稳L沸石（RE-USL），以RE USL沸石替代质量分数为5%的REUSY作为催化裂化催化剂的活性组分,用标准轻油微反活性试验（MAT）评价了其催化性能,并同单一稀土元素改性USL沸石进行了对比。结果表明,一定量的复合稀土改性USL沸石的催化性能优于单一稀土（La或Ce）改性的USL沸石，在催化裂化催化剂中加入稀土改性USL沸石,可以降低汽油产品的烯烃质量分数；可以提高汽油的辛烷值。当复合稀土在RE USL沸石中的质量分数为0.4%左右时， 与不加稀土改性USL沸石催化剂相比较，催化剂的活性指数MAT提高3.6个单位，烯烃质量分数降低1.57个单位，研究法辛烷值（RON）提高2.08个单位，产品分布更合理。     

Role of resonances in building cross sections: Comparison between the Mittag–Leffler and the T‐matrix Green function expansion approaches

Peaks in collision cross sections are often interpreted as resonances. The complex dilation method, as well as other methods relying on analytic continuation of the scattering formalism, can be used to clarify whether these structures are true resonances in the sense that they are poles of the S‐matrix and the associated Green function. The performance of the Mittag–Leffler expansion and T‐matrix Green function expansion methods are formally and computationally compared. The two methods are applied to two model potentials. Eigenenergies, s‐wave residues, and cross sections are computed with both methods. The resonance contributions to the cross sections are further analyzed by removing the residue contributions from the Mittag–Leffler and Green function expansion sums, respectively. It is suggested that the contribution of a resonance to a cross section should be defined through its S‐matrix residue. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Electroabsorption study of metal-to-ligand charge transfer in an organic complex of iridium (III)

The dipole moment and polarizability changes have been determined from electroabsorption (EA) spectroscopy of solid films of fac tris(2-(phenyl)pyridinato,N,C^2′)iridium (III) [Ir(ppy)₃]. The maximum changes in the dipole moment |Δμ|_S=(5.0±0.5) D/f (f is the local field correction factor: 1.3–1.7) accompany ground state to the lowest singlet, and |Δμ|_T=(1.7±0.5) D/f ground state to the lowest triplet metal-to-ligand charge transfer (MLCT) excited states formation, while the average polarizability change ų/f² follows from the fitting procedure throughout the visible absorption spectrum range. The experimental values of |Δμ| as well as energy positions of the MLCT states correlate with the literature results of time-dependent density functional theory.