声音震碎酒杯实验

利用喇叭播放频率逐渐变化的声音,当声音的频率与酒杯的固有频率相同时,酒杯发生共振,从而震碎.     

基于继电特性函数的互联电力系统混沌控制

电力系统中的混沌振荡对整个互联电网具有极大危害.本文利用Lyapunov指数、分岔图、相平面图和功率谱等分析一个简单互联电力系统的动力学行为,研究电力系统对电磁功率扰动幅值的敏感性.同时,提出一种基于继电特性函数的准滑动模态控制方法,对系统进行混沌振荡抑制,使系统快速平滑地到达控制目标.实验表明,该方法不仅能够缩短控制时间,减少因参数过大带来的系统冲击,而且对高频抖动也有很好的抑制作用,具有较强的鲁棒性.     

Bipolar-power-transistor-based limiter for high frequency ultrasound imaging systems

High performance limiters are described in this paper for applications in high frequency ultrasound imaging systems. Limiters protect the ultrasound receiver from the high voltage (HV) spikes produced by the transmitter. We present a new bipolar power transistor (BPT) configuration and compare its design and performance to a diode limiter used in traditional ultrasound research and one commercially available limiter. Limiter performance depends greatly on the insertion loss (IL), total harmonic distortion (THD) and response time (RT), each of which will be evaluated in all the limiters. The results indicated that, compared with commercial limiter, BPT-based limiter had less IL (−7.7 dB), THD (−74.6 dB) and lower RT (43 ns) at 100 MHz. To evaluate the capability of these limiters, they were connected to a 100 MHz single element transducer and a two-way pulse-echo test was performed. It was found that the −6 dB bandwidth and sensitivity of the transducer using BPT-based limiter were better than those of the commercial limiter by 22% and 140%, respectively. Compared to the commercial limiter, BPT-based limiter is shown to be capable of minimizing signal attenuation, RT and THD at high frequencies and is thus suited for high frequency ultrasound applications.     

螺旋波导压缩频率调制脉冲的初步研究

利用螺旋波导对频率调制脉冲进行压缩可大幅度提高脉冲峰值功率。利用所编Matlab程序对螺旋波导的色散特性进行了计算和分析,获得了波纹幅度和纵向周期长度等结构参数对其色散特性的影响规律;给出了脉冲功率压缩比的计算公式,对不同脉宽和频带宽度、不同频率调制形式的微波脉冲通过螺旋波导后的功率压缩比进行了计算和分析。计算表明:脉冲的频率调制形式对功率压缩比影响较大;相同频率调制形式下,脉冲长度越长,工作频带越宽,功率压缩比越高。为了获得尽可能高的功率压缩比,需对脉冲的频率变化方式进行调节,使其与螺旋波导色散特性匹配。同时还需要在高的功率压缩比和高的压缩效率之间做出权衡。计算得到,当注入脉冲的脉宽为40ns、工作频带为8.8~9.5GHz、频率调制形式与螺旋波导色散特性匹配时,功率压缩比达到了15,压缩效率约为40%。     

聚酯薄膜复合材料带状脉冲形成线传输介质

介绍了一种电气绝缘柔软复合材料——DMD膜,通过对膜结构的分析,设计了一种串联等效电路模型对其进行分析。运用该模型,对DMD膜在浸渍前和浸渍后两种情况下的介电常数和介电强度进行了求解并给出计算公式。从公式可以看出:DMD膜的介电常数在浸渍前后有明显的变化,浸渍后的介电常数得到了显著的提高,并且变化率较小;浸渍后DMD膜的介电强度高于未浸渍DMD膜的介电强度。当浸渍料介电常数愈大,聚酯材料上承受的电场强度愈大,浸渍料上承受的电场强度愈小,由于聚酯材料的耐压强度很高,所以整个传输线的介电强度得到提高。     

基于微扫描镜的激光投影

利用微机械加工技术制造出一种新型微扫描镜,结合半导体激光器,可用于投影显示.激光器发出的光束被两个分别沿着X轴、Y轴扭转的镜面相继反射,扫描出二维图形.实验测得扫描镜在15 V电压,频率为扫描镜谐振频率2倍的方波信号驱动下,镜子的光学扫描角度达±12°.由于每个镜子都沿各自轴以简谐规律扭转,扫描所得投影为李萨如图形.通过分析图形的形成原理并用Matlab仿真,选出了适用用于任意图案显示的扫描镜谐振频率组合(X轴2 400 Hz, Y轴2 425 Hz).该组合可以形成194×192个像素点,刷新频率为25 Hz.在此基础上提出了一种通过调制激光开关来进行投影显示的方法.     

Optical Single-Sideband Modulators and Their Applications

We review our recent work in the implementation of optical single-sideband (OSSB) modulation and in the application of this modulation format to microwave photonics and optical testing systems. We have developed an enhanced OSSB modulator for wide-band operation, the so-called bidirectional OSSB modulator, and a simplification of this scheme for narrow-band applications. These OSSB modulators are based on the use of a standard single-electrode Mach-Zehnder electro-optic modulator (MZ-EOM) and passive fiber-optic components. In both designs, the OSSB operation is shown to be independent of the MZ-EOM bias. Therefore, the optical modulation depth at the output of the device can be enhanced using minimum transmission biasing to provide suppression of the optical carrier. Finally, we demonstrate the application of OSSB modulators to the improvement of microwave/millimeter-wave subcarrier multiplexing fiber-optic links and to narrow-band fiber radio systems. In addition, we analyzed the feasibility and the limitations of an optical vector network analysis technique based on OSSB modulation that can provide sub-picometer wavelength resolution.     

A new strip line broad-band measurement evaluation for determining the complex permeability of thin ferromagnetic films

In the present paper, a new method for determining the frequency dependent complex permeability of thin magnetic films, designed for measurements up to 5 GHz, is presented. The measurement technique described here was carried out by a one-port permeameter, which is based on a short-circuited strip line. The complex permeability was deduced by a new analytical approach from the measured reflection coefficient of a strip line (S₁₁) with and without a ferromagnetic film material inside. An adaptive error correction was applied in the measurement procedure. The spectral permeability of thin FeCoAlN films with an in-plane uniaxial anisotropy of μ₀^*H_a=3.2 mT induced by annealing at CMOS temperatures in a static magnetic field was investigated. The measurements were compared with a theoretical model taking the Landau–Lifshitz and eddy current theories into account. A resonant frequency of about 1.6 GHz was observed.     

一种实用化实时测温系统工作波长优化设计的进一步分析

基于Kirchhoff定律,依照测温系统的各主要技术参数与各主要技术指标(温度分辨力、测温灵敏度、相对测温灵敏度及测温准确度)之间的关系,对利用激光并采用钽酸锂热释电探测器作光电转换器件的实用化实时测温系统的工作波长进行了进一步的优化设计.实验表明,在测温范围400~1200 ℃内,系统的测温误差符合设计要求.