芳环羟基化HPLC分离荧光法检测Cu(Ⅱ)-H2O2体系中产生的·OH

采用L-苯丙氨酸为探针,使用液相色谱分离荧光检测(FLD)和荧光分光光度分析(FS)两种方法平行检测Cu(Ⅱ)-H2O2 体系中产生的·OH.试验采用的激发波长277 nm,发射波长306 nm.体系在反应前后的荧光变化,可反映·OH产生量.对FLD与FS所得数据进行了比较分析,结果显示两种方法具有较高一致性.FS使用混合体系检测,易对荧光的产生造成干扰,而FLD法没有干扰.     

Monitoring photopolymerization reactions with optical pyrometry

This article describes the development of optical pyrometry (OP) as a new analytical technique for the continuous monitoring of the progress of both free‐radical and cationic photopolymerizations. The method is rapid, reproducible, and very easy to implement. A temperature profile of a photopolymerization can be obtained. Preliminary studies have shown that the temperatures of some polymerizing monomers can easily reach temperatures in excess of 250 °C. The effects of the mass and reactivity of the monomer, light intensity, structures, and concentrations of the photoinitiators and monomers as well as the presence or absence of oxygen on various free‐radical and cationic photopolymerizations were examined with this method. Coupling of real‐time infrared spectroscopy with OP provides a convenient method for simultaneously monitoring both the chemical conversion and the temperature of a photopolymerization. This combined technique affords new insights into the effects of temperature‐induced autoacceleration on the course of photopolymerizations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 579–596, 2003     

Photochemical deprotection of nitro-substituted benzenesulfenates via photoinduced electron transfer

The photochemical deprotection of alkyl 2,4-dinitrobenzenesulfenate or alkyl 2-nitrobenzenesulfenate was successfully achieved by addition of triethylamine, while it was unsuccessful without triethylamine. The sulfur-oxygen bond cleavage is thought to occur heterolytically in the sulfenate anion radical produced by photoinduced electron transfer with triethylamine.     

Synthesis of side‐chain liquid‐crystalline homopolymers and triblock copolymers with p‐methoxyazobenzene moieties and poly(ethylene glycol) as coil segments by atom transfer radical polymerization and their thermotropic phase behavior

A series of side‐chain liquid‐crystalline (LC) homopolymers of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with different degrees of polymerization were synthesized by atom transfer radical polymerization (ATRP), which were prepared with a wide range of number‐average molecular weights from 5.1 × 10³ to 20.6 × 10³ with narrow polydispersities of around 1.17. Thermal investigation showed that the homopolymers exhibit two mesophases, a smectic phase, and a nematic phase, and the phase‐transition temperatures of the homopolymers increase clearly with increasing molecular weights. A series of novel LC coil triblock copolymers with narrow polydispersities was synthesized by ATRP, and their thermotropic phase behavior was investigated with differential scanning calorimetry and polarized optical microscopy. The LC coil triblocks were designed to have an LC conformation of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with a wide range of molecular weights from 3.5 × 10³ to 1.7 × 10⁴ and the coil conformation of poly(ethylene glycol) (PEG) (number‐average molecular weight: 6000 or 12,000) segment. Their characterization was investigated with ¹H NMR, Fourier transform infrared spectra, and gel permeation chromatography. Triblock copolymers exhibited a crystalline phase, a smectic phase, and a nematic phase. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased, and the crystallization of PEG depressed with increasing molecular weight of the LC block. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2854–2864, 2003     

Reagent concentration effects in the REM resin solid phase synthesis of tertiary amines

The use of reagent concentration has resulted in increased rates for all stages of the REM resin synthesis of tertiary amines. These increases in rate translate into faster reaction times, higher yields and lower reagent consumption. Of the methods examined, the most successful was the use of perfluorous solvents, either alone or with a small amount of organic co-solvent.     

Synthesis and characterization of 6‐ and 12‐arm star polymers by nitroxide‐mediated radical polymerization of St and MA from dendritic TIPNO‐based hexafunctional and dodecafunctional macroinitiators

Dendritic multifunctional macroinitiators having six and 12 TIPNO‐based alkoxyamines, TIPNO‐6 and TIPNO‐12 , were synthesized and used in the living radical polymerization of styrene (St), methyl acrylate (MA), N,N‐dimethylacrylamide (DMAAm), and isoprene (IP). The polymerizations of St initiated with TIPNO‐6 gave 6‐arm star polymers with narrow polydispersities of 1.14–1.18. In the polymerizations of MA initiated with TIPNO‐6 and TIPNO‐12 , the influences of added TIPNO on the polydispersity indexes (PDIs) of the resulting star polymers were first investigated, and this led to the successful formation of poly(MA) star polymers with narrow polydispersities (1.10–1.18). Moreover, the polymerizations of DMAAm and IP from TIPNO‐6 in the presence or absence of TIPNO were briefly investigated. The benzyl ether bonds of the poly(St) and poly(MA) star polymers were cleaved by treating with Me₃SiI or Pd/C, and the resulting arm's parts were analyzed with SEC. The PDIs of the resulting arm parts were low (1.19–1.23), and the M_ns agreed with the M_n,theor, indicating that the poly(St) and poly(MA) star polymers had well‐controlled arms. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4364–4376, 2007     

用光学差分吸收光谱监测大气中污染气体浓度

在实验室内模拟测量了实际大气中污染气体的差分吸收光谱 (DOAS) .本文在介绍差分吸收光谱技术同时 ,分析计算了污染气体的浓度 .实验设计中被测气体为大气中的 2种主要污染气体 :工业锅炉的主要排放物SO2 和机动车尾气的主要成分NO .用氘灯作为光源测量其在紫外波段的特征吸收 ,并通过光纤束连接光栅光谱仪 ,由计算机自动采集和处理数据 .     

Rigid nitronyl-nitroxide-labelled anchoring molecules: syntheses, structural and magnetic investigations

The syntheses of two rigid organic molecular rods bearing a nitronyl-nitroxide radical and a terminal nitrogen-based functionality like a pyridine or a cyano group are reported. Both new paramagnetic molecules are fully characterized, including crystal structure analysis. Furthermore their magnetic behaviours in the crystalline state are investigated and their spin concentration corroborate their excellent purity. While the pyridine functionalized rod is synthesized by converting the corresponding benzaldehyde to the phenyl-nitronyl-nitroxide radical, the synthesis of the cyano functionalized rod demonstrates the accessibility of highly sophisticated spin-labelled molecules via cross-coupling reaction with a meta-iodo-phenyl-nitronyl-nitroxide moiety.     

Block copolymers of acrylic acid and butyl acrylate prepared by reversible addition–fragmentation chain transfer polymerization: Synthesis,characterization, and use in emulsion polymerization

Amphiphilic block copolymers of poly(acrylic acid‐b‐butyl acrylate) were prepared by reversible addition–fragmentation chain transfer polymerization in a one‐pot reaction. These copolymers were characterized by NMR, static and dynamic light scattering, tensiometry, and size exclusion chromatography. The aggregation characteristics of the copolymers corresponded to those theoretically predicted for a star micelle. In a butyl acrylate and methyl methacrylate emulsion polymerization, low amounts of these copolymers could stabilize latices with solid contents up to 50%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 684–698, 2003