NFZ-10工业辐照电子直线加速器

研制的电子直线加速器ＮＦＺ－１０的辐照加工能力相当于３０ＰＢｑ的６０Ｃｏ源，电子束能量为４～１２ＭｅＶ，平均束功率为３ｋＷ，扫描宽度为１ｍ，能量不稳定度≤±０．５％，束流不稳定度≤±０．６％，扫描不均匀度≤±２．５％。ＮＦＺ－１０加速器已被用于辐照各种电力半导体器件，一年多来运行稳定可靠并获得较好的经济效益。     

The effect of UV light on the thermooxidative stability of linear low density polyethylene films crosslinked by ionizing radiation

The effect of ultraviolet (UV) light on the thermooxidative stability of Linear Low Density Polyethylene(LLDPE) films was studied. LLDPE was stabilized with phenolic type antioxidant known as Irganox 1010, hindered amine light stabilizer known as Chimmasorb 944 and phenolic type gamma stabilizer. The influence of these additives on the thermooxidative stability of gamma and UV irradiated LLDPE were investigated by isothermal Differential Scanning Calorimeter (DSC). The oxidation induction time (OIT) experiments indicate that antirad free LLDPE films which contains antioxidant and UV stabilizer are more sensitive to gamma and UV radiation. On the other hand, films which contain antirad and irradiated to different doses of γ-radiation demonstrated improved thermooxidative stability.     

自由基引发马来酸二丁酯熔融接枝低密度聚乙烯的研究

用马来酸二丁酯(DBM)为接枝单体,过氧化二枯基(DCPO)为引发剂,对低密度聚乙烯(LDPE)进行了熔融接枝功能化。样品的红外光谱表明接枝反应确已发生。通过对样品中酯基的皂化水解测定产物的接枝率,对产物进行萃取,用凝胶量间接表征产物的交联程度;用溶液的特性粘度从侧面显示样品的支化或降解情况。实验结果表明,产物的接枝率和凝胶量可以通过选择反应条件(温度、时间及反应混合物的组成)来控制;过量的DCPO是引起交联产生凝胶的主要原因;向体系中添加DMF可阻止交联反应的发生,但产物的接枝率也有所下降,以自由基机理对上述结果进行了讨论。     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Hydrogen cycling induced diffraction peak broadening in C14 and C15 Laves phases

The diffraction peak broadening induced by hydrogen absorption-desorption cycling has been analyzed in four different Laves phase compounds with the C14 and C15 structures. The broadening is due to strain most probably originating from dislocations generated at the interface between the α and β hydride phases in connection with the cell volume difference between the two phases. It has been shown that it is strongly compound dependent. In the case of the C14 structure, the broadening is large and isotropic, and the latter can be related to the isotropy of the elastic constants of the metallic phase. The broadening is less for the compounds with the C15 structure, which can be related to a possibly softer lattice. Better ageing properties after long-term cycling are predicted for this crystal structure.     

Radiation induced polymerization of vinyl monomers and their application for preparation of wood-polymer composites

Polymerizing effects of high energy radiation has been found suitable for preparation of wood-polymer composites. In the present work after evaluating polymer products that have been obtained by irradiation method, wood-polymer composites have been prepared by in situ polymerization of vinyl acetate, acrylic acid and acrylic acid/styrene mixture using two samples of Iranian hardwoods, Beech and Hornbeam. These woods and their composites have been tested for their physical and mechanical properties. The results have shown that chemical bonding between polymer and the cell wall component lead to better strength properties in the composites.     

Radiation effects in the transient hot-wire technique

The transient hot-wire technique is widely used for absolute measurements of the thermal conductivity and thermal diffusivity of fluids. It is well established that fluid radiation effects significantly influence these measurements, especially those for the thermal diffusivity. Corrections for radiation effects are based on the models developed and deviations of the measured data from the ideal line source model. In this paper, the effect of fluid radiation on the measurements of the thermal conductivity of n-pentane is presented. For comparison, the influence of thermal radiation effect on measurement of transparent fluids, such as argon is also shown. The difference between the influence of natural convection and thermal radiation is also demonstrated.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

A photometric detector driven by beta radiation

It was recently found that typical Chromatographic carrier gases such as argon or nitrogen could be used in a modified flame photometric detector for general or selective determination of eluted molecules. The detector was powered not by a flame but by a radioactively stimulated, mild discharge. The luminescence arose from the second positive system of nitrogen (in argon), and various emissions from aroyl-containing molecules (in nitrogen).This study describes experiments that take away not only the flame but also the discharge: The energy that produces the luminescence is derived solely from the beta decay of⁶³Ni. Because of this low power input, the sensitivity of the present beta-driven photometric detector (-PD) is limited to about 25 ppm of nitrogen (in argon), and to about 5 pg/s for benzaldehyde and other well-responding aroyl compounds (in nitrogen). In accordance with mechanisms postulated earlier, other types of molecules do not produce significant responses in the absence of an electrical field.Material taken from doctoral thesis     

Laser field induced charge transfer: Para-nitroaniline coupled to a quantum mechanical radiation field

Summary We present a preliminary model for describing a solvated intramolecular charge transfer reaction coupled to a quantum mechanical radiation field. Actual calculations of energies and couplings were performed with a recently developed self-consistent reaction field response method. The representation of dressed molecular states is used for calculating state populations for various laser fields. The state populations are sensitive to the properties of the laser field.