Pr0.6-xNdxSr0.4FeO3-δ电极材料的光谱及性能研究

以柠檬酸-硝酸盐自蔓延燃烧法合成了ABO₃型钙钛矿结构的Pr_0.6-xNd_xSr_0.4FeO_3-δ(x=0.0～0.6)系列稀土复合氧化物粉体。利用傅立叶变换红外光谱(FTIR)和激光共焦拉曼光谱(LRS)对产物的晶体结构进行了表征。分别采用热膨胀仪测定烧结陶瓷体的热膨胀系数(TEC)；TG-DTA记录材料的热稳定性；XRD研究阴极材料与中温电解质Sm_0.2Ce_0.8O_1.9(SDC)及La_0.8Sr_0.2Ga_0.8Mg_0.2O_3-δ(LSGM)的化学相容性；SEM观察阴极/电解质复合材料的断口形貌。结果表明，该系列样品在高、低温热循环过程中化学稳定、晶型稳定；在室温至1 100 ℃范围内的平均热膨胀系数为1.16 × 10^-5 K^-1，与SDC及LSGM的热膨胀系数十分接近。阴极/电解质混合粉体1 200 ℃煅烧10 h，XRD未检测到新物质；SEM显示复合层断面界面清晰，没有相互扩散现象。该体系有望成为以SDC或LSGM为电解质的中温固体氧化物燃料电池合适的阴极材料。     

四针状氧化锌晶须的制备及其吸波性能的研究

随着雷达探测、卫星通信、航天航空和电子对抗等高科技的发展，特别是近年来抗电磁波干扰、隐形技术、微波暗室等研究领域的兴起．对电磁波吸波材料的研究日益受到人们的重视。随着现代电子工业和信息产业的高速发展．产生电磁波的电子产品（诸如计算机、电视机、手机、微波炉及电磁炉等）的数量急剧增加，     

Characterization of the barrier properties of composites of HDPE and purified cellulose fibers

The present work presents and discusses the interrelation between composition, morphology, thermal history, mechanical and barrier properties to oxygen and limonene of composites of HDPE/MA-PE/cellulose fibers of significant interest in, among others, food packaging applications. From the overall results, it was observed that increasing the loading of purified alpha-cellulose fibers in the polyethylene matrix beyond 10 wt.% led to a decrease in the permeability coefficient of d-limonene, effect which was found to be primarily related to a decrease in the overall solubility of this strongly plasticizing aroma component. On the other hand, the oxygen permeability was found to decrease to a significant extend with increasing fiber content beyond 5 wt.%, but this effect was more strongly ascribed to a significant decrease in the diffusion coefficient. Therefore, the fibers are thought to generate a more tortuous path for the non-interacting gas molecules to travel across the composites thickness, even when tested at high relative humidity conditions. Optimum fiber loading levels in terms of overall property balance were found to be around 20 wt.%.     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

液晶光定向层材料

本文综述了近10年来液晶显示用光定向层材料领域的研究现状和进展情况，主要概述了光降解型、光致异构型、光交联型以及自组装等材料，并对目前报道的液晶光定向机理进行了总结和归纳。     

Traceable measurements in clinical laboratories

 Reliable, traceable and comparable measurements provide the rational basis for evaluation of the quality of a result and the starting point for recognized laboratory accreditation in any national area. Modern medical diagnostics and treatment involve rapidly rising numbers and types of clinical laboratory measurements, that are reliable. Therefore, the basic principles to be followed to assure the traceability of clinical measurements as required by the Romanian Laws of Metrology are reviewed. Main sources affecting the quality of the unbroken chain of calibrations that relate the measurements back to appropriate measurement standards are discussed. Examples of how to achieve traceable measurements in clinical laboratories are presented. Details of specific uses of reference materials, measuring instruments and standard measurement methods are also discussed. Received: 8 January 1998 · Accepted: 21 April 1998     

A mesoporous Pt/TiO2 nanoarchitecture with catalytic and photocatalytic functions

A novel metal/semiconductor nanocomposite with catalytic and photocatalytic functions has been prepared. The new material consists of highly dispersed platinum (Pt) nanoparticles embedded in a cubic mesoporous nanocrystalline anatase (meso-nc-TiO2) thin film. The porous thin film possesses a narrow pore-size distribution and a large surface area. The diameter of the Pt cluster can be controlled to below 5 nm, and the high dispersion of these clusters gives rise to catalytic activity for the oxidation of carbon monoxide, an important reaction for automobile exhaust treatment. This novel ordered mesoporous Pt/TiO2 nanoarchitecture is also a promising photochemical material, as demonstrated by the photo-driven killing of Micrococcus lylae cells on the film.     

化“材”为“筑”

Chemistry is a central, practical and creative discipline. The development of chemistry plays an important role in the progress of science and society, as well as the improvement of the quality of human life. This paper introduces the chemical knowledge of stone, concrete, glass and other inorganic nonmetallic building materials by the anthropomorphically story. Taking nanomaterials as an example, the prospect of building materials development in the future is put forward.     

室温制备高合金化Pt-Ru/CMK-3催化剂及其对甲醇的电催化氧化

通过低温络合反应制备了高分散高合金化的Pt-Ru固溶体, 并将其均匀地担载在有序介孔碳CMK-3上, 以形成二元复合金属催化剂. XRD谱图表明,fcc结构的Pt原子部分被hcp结构的Ru原子取代形成置换固溶体， 而且几乎没有未形成合金的Ru存在. TEM和XRD研究结果表明， Pt-Ru/CMK-3催化剂中Pt-Ru合金粒子的平均粒径为27 nm, 且具有良好的均一度. 还研究了催化剂对甲醇的电催化氧化性能, 并与E-TEK公司同类催化剂进行了对比, 研究结果表明, Pt-Ru/CMK-3催化剂具有较大的电化学活性面积, 对甲醇的电催化氧化性能和抗CO中毒能力明显优于其它同类催化剂.     

Cu-P系稀土耐候钢中最佳稀土含量的研究

利用光学显微镜、图像分析仪和电子探针对低氧低硫的10PCuRE耐候钢板坯进行了观察和检测,采用干-湿周浸室内加速试验方法测得了试验钢的腐蚀率.用电化学方法测得了带锈样的阳极极化曲线.研究得出对于S:～0.004%,O:～0.002%的10PCuRE耐候钢,最佳稀土含量为0.0065%～0.012%,此稀土含量对非金属夹杂物的变质作用和耐蚀性能的提高最为有利.