碱性季铵盐“一锅法”催化合成四氢苯并[b]吡喃的水相反应研究

报道了以2-二甲氨乙基苄基二甲基氯化铵为催化剂,在水相介质中"一锅法"催化芳醛、丙二腈和5,5-二甲基-1,3-环己二酮合成2-氨基-3-氰基-4-芳基-7,7-二甲基-5-氧代-4H-5,6,7,8-四氢苯并[b]吡喃的方法.该法具有产率高、反应时间短、操作简便、对环境友好、催化剂可重复使用等优点.     

Tandem Lewis acid catalyzed coupling/semipinacol rearrangement of allylic alcohol

Construction of the polyaryl quaternary unit through a ZnBr2 catalyzed tandem coupling/semipinacol rearrangement participated by allylic cations was reported for the first time.     

四元体系NaCl-ZnCl2-HCl(～9%)-H2O(25℃)的相平衡

文献[1]研究了四元体系KC l-ZnC l2-HC l(~10·6%)-H2O(25℃)的相平衡,在体系中发现并得到了未见文献报导的5:4型新化合物5KC l·4ZnC l2·3H2O,并认为该化合物可能是良好的激光基质材料。本文作者曾研究了四元体系LaC l3-ZnC l2-HC l(~8·0%)-H2O(25℃)的相平衡,也发现了3种未     

含三个硬脂酰胺基的树枝状季铵盐的制备

由三羟甲基丙烷三丙烯酸酯(TMPTA)和乙二胺(EDA)直接进行M ichael加成反应,合成端基为3个NH2的树枝状大分子G(NH2)3,用硬脂酰氯将其端氨基进行酰胺化得到端基为3个硬脂酰基的树枝状大分子GS(R)3,产率为82.4%。GS(R)3进一步与碘甲烷反应,其分子中的3个仲氨基被季铵化,生成树枝状季铵盐GI(R)3,产率为82.0%。讨论了反应温度、反应时间和原料配比对GS(R)3和GI(R)3产率的影响,并用红外、核磁和元素分析对GS(R)3和GI(R)3的结构进行表征。     

壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂的合成 及其表面性质的研究

合成了系列壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂(GNPQA), 用核磁、红外和元素分析对它们的结构进行了表征, 考察了反应条件对转化率的影响, 并用表面张力法和稳态荧光探针法对GNPQA的表面性能及胶束聚集数(N)进行了研究. 结果表明, 较优的反应条件: 反应时间为12 h, 反应温度为70 ℃, 反应原料摩尔比为n(双聚壬基酚聚氧乙烯醚)∶n(三乙胺)∶n(环氧氯丙烷)＝1∶1∶1; GNPQA的临界胶束浓度(CMC)值较相应的单体壬基酚聚氧乙烯醚型季铵盐表面活性剂(NPQA)降低了1～2个数量级, 显示了较高的表面活性; 当GNPQA溶液浓度为5～9倍CMC时, N值随浓度增大而线性增大; 随着氧乙烯(EO)单元数的增长, GNPQA的CMC和N值均逐渐减小; 结合GNPQA的表面性能参数和N值的变化规律, 探讨了这类表面活性剂表面及胶束聚集体的结构形态.     

Mechanical properties of anion exchange membranes by combination of tensile stress–strain tests and dynamic mechanical analysis

The thermomechanical properties of anion exchange polymers based on polysulfone (PSU) quaternized with trimethylamine (TMA) or 1,4‐diazabicyclo[2.2.2]octane (DABCO) and containing hydroxide or chloride anions by tensile stress–strain tests and dynamic mechanical analysis (DMA) have been determined. The reported mechanical properties included the Young's modulus, tensile strength, and elongation at break from tensile tests and the storage and loss modulus and glass transition temperature from DMA. The anion exchange membranes behaved as stiff polymers with Young's modulus in the order of 1 GPa, relatively with high strength (about 30 MPa) and low elongation at break (around 10%) was observed. Tensile tests were also made with membranes exchanged with hydrogen‐carbonate and carbonate anions to control the absence of important carbonation of the OH form. The glass transition temperatures were of the order of 150 °C (PSU‐TMA) or 200 °C (PSU‐DABCO) for the hydroxide form, confirmed by differential scanning calorimetry; they increase further by about 50 K, when hydroxide ions are replaced by chloride. This result and the increase of the storage modulus could be interpreted by the higher hydration of hydroxide ions and the plasticizing effect of water, which reduced the Van der Waals interactions between the macromolecular chains. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1180–1187     

Terahertz optical asymmetric demultiplexer based tree-net architecture for all-optical conversion scheme from binary to its other 2n radix based form

To exploit the parallelism of optics in data processing,a suitable number system and an efficient encoding/decoding scheme for handling the data are very essential.In the field of optical computing and parallel information processing,several number systems like binary,quaternary,octal,hexadecimal,etc.have been used for different arithmetic and algebraic operations.Here,we have proposed an all-optical conversion scheme from its binary to its other 2n radix based form with the help of terahertz optical asymmetric demultiplexer (TOAD) based tree-net architecture.