Growth kinetic study of ionic liquid mediated synthesis of gold nanoparticles using Elaeis guineensis (oil palm) kernels extract under microwave irradiation

Gold nanoparticles (AuNPs) are the most studied nanomaterials due to their promising applications. However, surface capping of AuNPs is essential to protect aggregation for enhanced colloidal stability. In this study, a single step method was established to synthesize stable AuNPs using oil palm kernel (OPK) extract prepared in IL[EMIM][OAc] (1-ethyl-3-methylimidazolium acetate). Ionic liquids were used for phytochemicals extraction along with capping and stabilizing of AuNPs after their synthesis. The OPK extract reduced the gold precursor, and UV–vis spectroscopy revealed a sharp surface plasmon (SPR) peaks in the region of 524–529 nm, which confirmed the formation of AuNPs. UV–vis and TEM analysis indicated that microwave assisted synthesis was rapid to synthesize well dispersed and small sized AuNPs in comparison with conventional heating. FTIR analysis of kernels extract before and after its reaction with gold precursor identified the involvement of CH aromatic groups, polyphenolic OH groups, and carbonyl amide groups that are responsible for reduction of trivalent gold ions to AuNPs. EDAX and XPS analysis were performed to identify the elemental gold and its surface interaction with ILs and other organic moieties. Colloidal AuNPs kept at room temperature for periods of six months were remained stable. The change of pristine nanostructure arises due to involvement of different driving forces during growth of nanoparticles. Thermodynamically instability of nanomaterials may leads to Ostwald Repining (OR) or adopt complex pattern of growth and undergo coalesce and orientation attachment (OA). These models were fitted to compare the theoretically growth of particles along with actual increase of particles size. Experimental results suggested that OA growth was originated in early phase, however, it substituted and mainly controlled by OR growth pattern over time.     

Curing of a maleimide model compound

A monofunctional maleimide-ended model compound was synthesized and purified. The thermal curing of this compound was followed by size exclusion chromatography and the molecular masses of the oligomers formed during the curing reaction were determined by mass spectroscopy. It was found that high molecular mass species were not thermally stable. At high temperature and after enough time, a strong decrease in the polydispersity of the oligomers and a significantly preferential formation of trimer were observed. From ¹³C-NMR characterization, a five membered ring structure was found for the trimer, which explains the thermal stability of this species. © 1995 John Wiley & Sons, Inc.     

Synthesis and Spectroscopic Studies of Chosen Heteropolytungstates and Their Ln(III) Complexes

The heteropolytungstates [(Na)P₅W₃₀O₁₁₀]^4– (I), [(Na)Sb₉W₂₁O₈₆]^18– (II) and [(Na)As₄W₄₀O₁₄₀]^27– (III) and the monovacant Keggin structure of the general formula [XW_11–xMo_xO₃₉]^n– (X-Si, P; n = 7 for P and 8 for Si) (IV) as well as their europium(III) complexes were studied. The structures of I–IV as well as the europium(III) encrypted [(Eu)P₅W₃₀O₁₁₀]^12– (VI), [(Eu)Sb₉W₂₁O₈₆]^16– (VII), [(Eu)As₄W₄₀O₁₄₀]^25– (VIII) and sandwiched [Eu(XW_11–xMo_xO₃₉)₂]^n– (n =11 for P and n = 13 for Si) (V) complexes were synthesized and spectroscopically characterized. The complexes were studied using UV-Vis absorption and luminescence, as well as the laser-induced europium ion luminescence spectroscopy. Absorption spectra of Nd(III) were used to characterize the complexes formed. Excitation and emission spectra of Eu(III) were obtained for solid complexes and their solutions. The relative luminescence intensities of the Eu(III) ion, expressed as the ratio of the two strongest lines at 594 nm and 615 nm, = I₆₁₅/I₅₉₄, which is sensitive to the environment of the primary coordination sphere about the Eu(III) ion, was calculated. In the case of the sandwiched [Eu(XW_11–xMo_xO₃₉)₂]^n– complexes a linear dependence of the luminescence quantum yield of Eu(III) ion, , (calculated using [Ru(bpy)₃]Cl₂ as a standard) on the content of Mo (number of atoms, x) in the [Eu(XW_11–xMo_xO₃₉)₂]^n– structure was observed.     

Proton transfer in nafion membrane by quantum chemistry calculation

We estimated the energy barriers of proton transfers in the systems of (CF₃SO₃/H/SO₃CF₃)⁻ and (CF₃SO₃/H/H₂O/SO₃CF₃)⁻ as models of a water-swollen Nafion membrane by an ab initio density functional quantum calculation method with consideration of the hydration effect. As a result, the proton transfer between the SO sites, which is accompanied by one water molecule, was found to be one of the proton-transfer mechanisms in the water-swollen Nafion membrane; that is, the surface diffusion mechanism was found to be important for the proton transfer in that membrane. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1905–1914, 2004     

Extraction Equilibria between Benzene and Water of Uni- and Bivalent Metal Picrates with Lariat 16-Crown-5: Effect of the Side Arms on the Extraction Ability and Selectivity

The overall extraction constants (K_ex) of uni- andbivalent metal picrates with 15-(2,5-dioxahexyl)-15-methyl-16-crown-5(L16C5) were determined between benzene and water at 25°C. TheK_ex values were analyzed into the constituent equilibriumconstants, i.e., the extraction constant of picric acid, the distributionconstant of the crown ether, the stability constant of the metalion–crown ether complex in water, and the ion-pair extraction constantof the complex cation with the picrate anion. The K_ex valuedecreases in the orders Ag⁺ > Na⁺ >Tl⁺ > K⁺ > Li⁺ andPb²⁺ > Ba²⁺ > Sr²⁺ for theuni- and bivalent metals, respectively, which are the same as those observedfor 16C5. The extraction selectivity was found to be governed by theselectivity of the ion-pair extraction of the L16C5–metal picratecomplex rather than by that of the complex formation in water. Theextraction ability of L16C5 is smaller for all the metals than that of 16C5,which is mostly attributed to the higher lipophilicity of L16C5. Differencesin the extraction selectivity between L16C5 and 16C5 were observed for thebivalent metals but little for the univalent metals. The side-arm effect onthe extraction selectivity was interpreted on the basis of the negativecorrelation between the effect on the complex stability constant in waterand that on the ion-pair extraction constant.     

Effect of pH on the Encapsulation of the Salicylic Acid / Salicylate System by Hydroxypropyl-β-Cyclodextrin at 25 °c. A Fluorescence Enhancement Study in Aqueous Solutions

The encapsulation of the acid/base conjugated system salicylic acid(HSA)/salicylate (SA^-) by hydroxypropyl--cyclodextrin (HPBCD) has beenstudied through fluorescence emission enhancement measurements in aqueoussolutions at 25 °C. With the aim of analyzing the crucial importance ofa proper and cautious choice of the pH of the medium (i.e. choice of thebuffer), the study has been carried out at pH = 1, 2, 4 and 7. Since the pK_a of the HSA/SA^- system is 2.95 at 25 °C, the presence of the protonated(HSA) and non-protonated (SA^-) forms suitable for inclusion by cyclodextrinvary appreciably within the different pH conditions: 99% HSA,1% SA^- at pH = 1, 90% HSA, 10% SA^- at pH = 2,10% HSA, 90% SA^- at pH = 4, and 0% HSA,100% SA- at pH =7. The association constants K CD : HSA and K _{CD: SA-} have been determined in all cases by using a nonlinear regressionanalysis of the experimental data at three different ^em. The effectof the pH of the medium on all the equilibria involved as well as in the Kvalues is fully discussed. The 8-anilino-1-naphthalene sulfonate (ANS) +-cyclodextrin (-CD) system, widely reported in literature, hasinitially been studied to check the experimental protocol and the numericalmethod.     

The steric and electronic effects of aliphatic fluoroalkyl groups

Ab initio calculations were performed on 18 fluorinated and unfluorinated alcohols at the B3LYP and HF levels with the 6-311G^∗∗ basis set. Molar volumes of the alcohols were computed at each level and averaged to produce a scale of relative size. From this, various isosteric replacements of potential use in drug design were suggested: ethyl by FCH₂CH₂ or HCF₂CH₂, propyl by CF₃CH₂, isopropyl by CF₃(CH₃)CH or (FCH₂)₂CH, isobutyl or t-butyl by (CF₃)₂CH, and 3-methyl-2-butyl by CF₃(CH₃)₂C. Calculation of the charge on oxygen and the Wiberg index of the CO bond allowed an electronegativity scale to be constructed for the fluoroalkyl groups. Electronegativity decreased in the order: (CF₃)₃C>(CF₃)₂CH>C₂F₅CH₂>CF₃CH₂>CH₃(CF₃)₂C>HCF₂CH₂>CF₃(CH₃)CH>(FCH₂)₂CH>FCH₂CH₂>CF₃(CH₃)₂C. This ranking agreed with literature acid dissociation data for the alcohols studied.     

Internal dynamics of the LaI3 molecule. II. Thermal average structure of the molecule and mean square vibration amplitudes

The structural parameters of the effective r _g configuration of the LaI₃ molecule were calculated using the DFT/B3LYP method. The difference between the calculated values of r _e (La-I) and r _g (La-I) is mostly due to the anharmonicity of the ν₁ and ν₂ vibrations and does not exceed the error in determining the distance r _g (La-I) in the electron diffraction experiment. Inclusion of the anharmonicity of the ν₂ and ν₄ deformation vibrations in calculations leads to decreased amplitudes l(I…I) and shrinking effect δ(I…I) compared to the respective values obtained in the harmonic approximation. The LaI₃ molecule proved to be more rigid than predicted by B3LYP calculations.     

Reaction sites of <Emphasis Type="Italic">N,N′</Emphasis>-substituted <Emphasis Type="Italic">p</Emphasis>-phenylenediamine antioxidants

The geometries of N,N′-diphenylbenzene-1,4-diamine (DPPD), N-phenyl-N′-(1-phenylethyl)benzene-1,4-diamine (SPPD), N-(4-methylpentan-2-yl)-N′-phenylbenzene-1,4-diamine (6PPD), N-propan-2-yl-N′-phenylbenzene-1,4-diamine (IPPD), N-(2-methoxybenzyl)-N′-phenylbenzene-1,4-diamine (MBPPD), and N-phenyl-N′-(2-phenylpropan-2-yl)benzene-1,4-diamine (CPPD) as well as of their dehydrogenation products were optimized by the semiempirical AM1 method. The results support the idea of stable N_B=C_X structures formation during the consecutive dehydrogenation of SPPD, 6PPD, IPPD, and MBPPD antioxidants. The biradicals formed during the second step of dehydrogenation of substituted phenylenediamines might be important for their antioxidant effectiveness. Dedicated to Professor Vladimír Kvasnička, DrSc., in honour of his 65th birthday