多道HCN激光干涉仪在HL－1装置上的电子密度分布测量

本文描述了为测量ＨＬ－１装置电子密度分布而研制的多道远红外（ＦＩＲ）激光干涉仪系统及其特点。首次对装置在弹丸加料以及拉瓦尔（Ｌａｖａｌ）超声分子束注入实验条件下的等离子体电子密度时－空分布进行了观测和初步分析。同时，介绍一种处理密度相移信号的新方法。     

Characterization and estimation of refractive index profile of laser-written photopolymer optical waveguides

In this study, channel waveguides fabricated in photopolymer films by direct-writing using a low-power CW laser, are used as phase objects in a simple plane-wave diffraction setup, and the refractive index modulation profiles of the waveguides are characterized using the recorded diffraction patterns. Index profiles are modeled by piece-wisely combining two Gaussian functions representing the central and the tail regions. Measured diffraction patterns are matched with patterns generated using the model. This simple model makes it possible to design various channel waveguides embedded into polymer substrates. The proposed model is tested on three distinctive waveguide profiles written on the same Acrylamide/Polyvinyl Alcohol based photopolymer with different exposures.     

Dielectronic recombination and resonant transfer excitation processes for helium-like krypton

The relativistic configuration interaction method is employed to calculate the dielectronic recombination(DR) cross sections of helium-like krypton via the 1s2lnl ’(n = 2,3,...,15) resonances.Then,the resonant transfer excitation(RTE) processes of Kr 34+ colliding with H,He,H 2,and CH x(x = 0-4) targets are investigated under the impulse approximation.The needed Compton profiles of targets are obtained from the Hartree-Fock wave functions.The RTE cross sections are strongly dependent on DR resonant energies and strengths,and the electron momentum distributions of the target.For H 2 and H targets,the ratio of their RTE cross sections changes from 1.85 for the 1s2l2l ’ to 1.88 for other resonances,which demonstrates the weak molecular effects on the Compton profiles of H 2.For CH x(x = 0-4) targets,the main contribution to the RTE cross section comes from the carbon atom since carbon carries 6 electrons;as the number of hydrogen increases in CH x,the RTE cross section almost increases by the same value,displaying the strong separate atom character for the hydrogen.However,further comparison of the individual orbital contributions of C(2p,2s,1s) and CH 4(1t 2,2a 1,1a 1) to the RTE cross sections shows that the molecular effects induce differences of about 25.1%,19.9%,and 0.2% between 2p-1t 2,2s-2a 1,and 1s-1a 1 orbitals,respectively.     

采用单边大光腔结构改善电吸收调制器的光场分布

设计并制备了具有单边大光腔结构的半导体电吸收(electroabsorption，EA)调制器.模拟和测试的结果均表明：单边大光腔结构能有效地改善EA调制器的光场分布，使椭圆形的近场光斑变得圆形化，从而达到与圆形模式光纤之间的匹配，有利于提高耦合效率.     

浅海声速剖面与移动声源的跟踪定位

在水平非均匀分布的浅海环境中,针对移动声源跟踪时,声速剖面的变化会对声场产生影响,提出了一种利用集合卡尔曼滤波算法的声速剖面跟踪反演和移动声源跟踪定位的方法。首先,将声速剖面进行距离和深度的参数化表示,从而将对声速剖面的跟踪转化为对声速剖面前3阶经验正交函数系数的跟踪;其次,通过将声源状态信息和声速剖面信息表示为状态变量,而将垂直线列阵接收到的声场信息作为测量值建立状态-测量模型,然后利用集合卡尔曼滤波方法对模型状态变量进行跟踪。仿真结果得出:声速剖面跟踪反演的均方根误差和移动声源跟踪定位的绝对误差都非常小,对声源的跟踪定位精度很高。并且通过增加集合样本数、增加接收信号信噪比以及增加接收阵元数目都可以提高跟踪定位结果精度。最后,利用东海实验数据对本方法进行了验证。     

3D molecular imaging SIMS

Thin monolayer and bilayer films of spin cast poly(methyl methacrylate) (PMMA), poly(2-hydroxyethyl methacrylate) (PHEMA), poly(lactic) acid (PLA) and PLA doped with several pharmaceuticals have been analyzed by dynamic SIMS using SF₅⁺ polyatomic primary ion bombardment. Each of these systems exhibited minimal primary beam-induced degradation under cluster ion bombardment allowing molecular depth profiles to be obtained through the film. By combing secondary ion imaging with depth profiling, three-dimensional molecular image depth profiles have been obtained from these systems. In another approach, bevel cross-sections are cut in the samples with the SF₅⁺ primary ion beam to produce a laterally magnified cross-section of the sample that does not contain the beam-induced damage that would be induced by conventional focussed ion beam (FIB) cross-sectioning. The bevel surface can then be examined using cluster SIMS imaging or other appropriate microanalysis technique.     

蒸发器支撑板板孔精密测量系统

建立了蒸发器支撑板板孔精密测量系统,并提出了基于边缘约束条件的轮廓参量测量方法.首先采用图像处理技术将待测目标转化为二维离散坐标点,计算其最小外接矩形并对轮廓进行预定位;然后将轮廓分割成相互重合的扩展邻域轮廓,建立以曲率角为原则的边缘约束算法对各轮廓段精确定界,实现对轮廓参量的精密测量.实验和误差分析表明,该系统测量准确度优于0.02mm,对具有复杂轮廓的零件参量测量有参考价值.     

用时间-边界跟踪模型确定抗蚀剂显影后的轮廓分布

文章提出了时间一边界跟踪模型的定义,阐述了用该模型确定抗蚀剂显影后的轮廓分布的方法,并给出了模拟计算结果.     

He,Ne,Ar,Kr和Xe原子电子的动量密度分布研究

对He,Ne,Ar,Kr和Xe原子体系中电子在动量空间的性质进行了系统的理论计算研究.采用自洽场HFR方法计算了坐标空间He,Ne,Kr和Xe原子体系单电子径向波函数,动量空间的单电子波函数由坐标空间原子体系单电子径向波函数通过运用傅立叶变换计算得到.在冲量近似条件下,进一步计算研究了这些原子的单电子动量密度分布和原子体系总的Compton轮廓.计算结果与已有的实验实验值和其他文献的理论计算结果比较表明,本文计算的结果是准确的.     

靶丸X射线数字图像的轮廓分析及功率谱评价

针对多层靶丸X射线数字图像的成像原理和轮廓边缘进行了理论分析;推导了由靶丸边缘特征点确定靶丸圆心和半径的精确最小二乘拟合算法;对于不同类型(阶跃状或屋顶状)的靶丸图像边缘,采用均化二阶微分算法或径向吸收强度最小二乘洛伦兹型拟合寻峰算法获取亚像素精度的靶丸圆周轮廓边缘数据;应用快速傅里叶变换算法对靶丸圆周轮廓数据进行分析,获得了靶丸表面外轮廓或内轮廓模数-功率谱特征曲线。