Aspects of trapping efficiency and matrix effects in the development of a restricted‐access‐media‐based trap‐and‐elute liquid chromatography with mass spectrometry method

Online restricted access media with liquid chromatography and tandem mass spectrometry for the direct analysis of small molecules in biological fluids represents an interesting alternative to time‐demanding traditional sample preparation techniques. In this study, important considerations concerning the development of a restricted access media with liquid chromatography and tandem mass spectrometry method for the analysis of dansylated estrogens in biological matrix are presented. Parameters influencing peak tailing and trapping efficiency were evaluated. The key factors included the ion strength of the mobile phase, a loading flow rate of the sample onto the trap column, and selection of a proper stationary phase of the trap column for a given set of analytes. These parameters have proven to be essential for minimizing any unwanted chromatographic peak tailing. The bulk derivatization of the analytes in the biological fluids and its relationship to the observed matrix effects was evaluated as well.     

A quick,easy, cheap,effective, rugged,and safe sample pretreatment and liquid chromatography with tandem mass spectrometry method for the simultaneous quantification of 33 mycotoxins in Lentinula edodes

Lentinula edodes, one of the most cultivated edible fungi in the world, are usually neglected for mycotoxins contamination due to the initial thinking of its resistance to mycotoxingenic molds. In the present study, a sensitive and reliable liquid chromatography with tandem mass spectrometry method was developed for the simultaneous quantification of 33 mycotoxins in L. edodes. Targeted mycotoxins were extracted using a quick, easy, cheap, effective, rugged, and safe procedure without any further clean‐up step, and analyzed by liquid chromatography with tandem mass spectrometry on an Agilent Poroshell 120 EC‐C₁₈ column (100 × 3 mm, 2.7 μm) with a linear gradient elution program using water containing 5 mM ammonium acetate and methanol as the mobile phase. After validation by determining linearity (R² > 0.99), sensitivity (LOQ ≤ 20 ng/kg), recovery (73.6–117.9%), and precision (0.8–19.5%), the established method has been successfully applied to reveal the contamination states of various mycotoxins in L. edodes. Among the 30 tested samples, 22 were contaminated by various mycotoxins with the concentration levels ranging from 3.3–28 850.7 μg/kg, predicting that the edible fungus could be infected by the mycotoxins‐producing fungi. To the best of our knowledge, this is the first report about real mycotoxins contamination in L. edodes.     

Preparation and characterization of poly(lactic acid)/poly(methyl methacrylate) blend tablets for application in quantitative analysis by micro Raman spectroscopy

Poly(lactic acid) (PLA) is a biodegradable polymer that has a variety of applications, one of which is as biomaterial in surgery or as functional layers on implants, due to its compatibility with living tissue. This paper reports the possibilities of quantification of poly(lactic acid) (PLA) in a polymer matrix such as poly(methyl methacrylate) (PMMA) by micro Raman spectroscopy (MRS). Blends of amorphous poly(DL‐lactic acid) with poly(methyl methacrylate) were prepared by the procedure of dissolution/precipitation. Thermal properties of the blends such as the glass transition temperature (Tg) were characterized by differential scanning calorimetry (DSC). The PLA/PMMA blends exhibited only a single glass transition region, indicating that this system is miscible. The PLA/PMMA system obeys the Gordon–Taylor equation (Tg versus PLA content). Various concentration ratios of PLA blends were prepared to use as a basis for quantitative analysis by MRS. Intensities of the characteristic bands at 813 cm⁻¹ (νCOC of PMMA) and 873 cm⁻¹ (νC―COO of PLA) were used for the calculation. The calibration graph showed a good linear correlation with an R² value of 0.9985. On the basis of the calibration curve obtained, the determined content of several PLA/PMMA blends was in good agreement when compared with nominal contents. The limit of detection (LOD) and quantification (LOQ) were calculated by the calibration data set as signal‐to‐noise method. The relative standard deviation of this method was lower than 10% and the accuracy better than 4%. This study demonstrated that Raman spectroscopy provides an alternative non destructive method for quantitative analysis of PLA in a PMMA matrix. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of accelerated heteronuclear single quantum coherence experiments to the rapid quantification of monosaccharides and disaccharides in dairy products

Monosaccharides and disaccharides are important dietary components, but if insufficiently metabolized by some population subgroups, they are also linked to disease patterns. Thus, the correct analytical identification, quantification, and labeling of these food components are crucial to inform and potentially protect consumers. Enzymatic assays and high-performance anion-exchange chromatography with pulsed amperometric detection are established methods for the quantification of monosaccharides and disaccharides that, however, require long measuring times (60–180 min). Accelerated methods for the identification and quantification of the nutritionally relevant monosaccharides and disaccharides d -glucose, d -galactose, d -fructose, sucrose, lactose, and maltose were therefore developed. To realize this goal, the NMR experiments HSQC (heteronuclear single quantum coherence) and acceleration by sharing adjacent polarization (ASAP)-HSQC were applied. Measurement times were reduced to 27 and 6 min, respectively, by optimizing the interscan delay and applying non-uniform sampling. The optimized methods were used to quantify d -glucose, d -galactose, d -fructose, sucrose, and lactose in various dairy products. Results of the HSQC and ASAP-HSQC methods are equivalent to the results of the reference methods in terms of both precision and accuracy, demonstrating that these methods can be used to correctly analyze nutritionally relevant monosaccharides and disaccharides in short times.     

The Analysis of Phenolic Compounds in Walnut Husk and Pellicle by UPLC-Q-Orbitrap HRMS and HPLC

Husk and pellicle as the agri-food waste in the walnut-product industry are in soaring demand because of their rich polyphenol content. This study investigated the differential compounds related to walnut polyphenol between husk and pellicle during fruit development stage. By using ultra-high performance liquid chromatography-quadrupole-orbitrap (UHPLC-Q-Orbitrap), a total of 110 bioactive components, including hydrolysable tannins, flavonoids, phenolic acids and quinones, were tentatively identified, 33 of which were different between husk and pellicle. The trend of dynamic content of 16 polyphenols was clarified during walnut development stage by high-performance liquid chromatography (HPLC). This is the first time to comprehensive identification of phenolic compounds in walnut husk and pellicle, and our results indicated that the pellicle is a rich resource of polyphenols. The dynamic trend of some polyphenols was consistent with total phenols. The comprehensive characterization of walnut polyphenol and quantification of main phenolic compounds will be beneficial for understanding the potential application value of walnut and for exploiting its metabolism pathway.     

GC-MS Studies on Derivatization of Creatinine and Creatine by BSTFA and Their Measurement in Human Urine

In consideration of its relatively constant urinary excretion rate, creatinine (2-amino-1-methyl-5H-imidazol-4-one, MW 113.1) in urine is a useful endogenous biochemical parameter to correct the urinary excretion rate of numerous endogenous and exogenous substances. Reliable measurement of creatinine by gas chromatography (GC)-based methods requires derivatization of its amine and keto groups. Creatinine exists in equilibrium with its open form creatine (methylguanidoacetic acid, MW 131.1), which has a guanidine and a carboxylic group. Trimethylsilylation and trifluoroacetylation of creatinine and creatine are the oldest reported derivatization methods for their GC-mass spectrometry (MS) analysis in human serum using flame- or electron-ionization. We performed GC-MS studies on the derivatization of creatinine (d₀-creatinine), [methylo-²H₃]creatinine (d₃-creatinine, internal standard) and creatine (d₀-creatine) with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) using standard derivatization conditions (60 min, 60 °C), yet in the absence of any base. Reaction products were characterized both in the negative-ion chemical ionization (NICI) and in the positive-ion chemical ionization (PICI) mode. Creatinine and creatine reacted with BSTFA to form several derivatives. Their early eluting N,N,O-tris(trimethylsilyl) derivatives (8.9 min) were found to be useful for the precise and accurate measurement of the sum of creatinine and creatine in human urine (10 µL, up to 20 mM) by selected-ion monitoring (SIM) of m/z 271 (d₀-creatinine/d₀-creatine) and m/z 274 (d₃-creatinine) in the NICI mode. In the PICI mode, SIM of m/z 256, m/z 259, m/z 272 and m/z 275 was performed. BSTFA derivatization of d₀-creatine from a freshly prepared solution in distilled water resulted in formation of two lMate-eluting derivatives (14.08 min, 14.72 min), presumably creatinyl-creatinine, with the creatininyl residue existing in its enol form (14.08 min) and keto form (14.72 min). Our results suggest that BSTFA derivatization does not allow specific analysis of creatine and creatinine by GC-MS. Preliminary analyses suggest that pentafluoropropionic anhydride (PFPA) is also not useful for the measurement of creatinine in the presence of creatine. Both BSTFA and PFPA facilitate the conversion of creatine to creatinine. Specific measurement of creatinine in urine is possible by using pentafluorobenzyl bromide in aqueous acetone.     

The development and assessment of high‐throughput mass spectrometry‐based methods for the quantification of a nanoparticle drug delivery agent in cellular lysate

The safe use of lipid‐based drug delivery agents requires fast and sensitive qualitative and quantitative assessment of their cellular interactions. Many mass spectrometry (MS) based analytical platforms can achieve such task with varying capabilities. Therefore, four novel high‐throughput MS‐based quantitative methods were evaluated for the analysis of a small organic gene delivery agent: N,N‐bis(dimethylhexadecyl)‐1,3‐propane‐diammonium dibromide (G16‐3). Analysis utilized MS instruments that detect analytes using low‐resolution tandem MS (MS/MS) analysis (i.e. QTRAP or linear ion trap in this work) or high‐resolution MS analysis (i.e. time of flight (ToF) or Orbitrap). Our results indicate that the validated fast chromatography (FC)‐QTRAP‐MS/MS, FC‐ LTQ‐Orbitrap‐MS, desorption electrospray ionization‐collision‐induced dissociation (CID)‐MS/MS and matrix assisted laser desorption ionization‐ToF/ToF‐MS MS methods were superior in the area of method development and sample analysis time to a previously developed liquid chromatography (LC)‐CID‐MS/MS. To our knowledge, this is the first evaluation of the abilities of five MS‐based quantitative methods that target a single pharmaceutical analyte. Our findings indicate that, in comparison to conventional LC‐CID‐MS/MS, the new MS‐based methods resulted in a (1) substantial reduction in the analysis time, (2) reduction in the time required for method development and (3) production of either superior or comparable quantitative data. The four new high‐throughput MS methods, therefore, were faster, more efficient and less expensive than a conventional LC‐CID‐MS/MS for the quantification of the G16‐3 analyte within tissue culture. When applied to cellular lysate, no significant change in the concentration of G16‐3 gemini surfactant within PAM212 cells was observed between 5 and 53 h, suggesting the absence of any metabolism/excretion from PAM212 cells. Copyright © 2014 John Wiley & Sons, Ltd.     

Quantification of imatinib and related compounds using capillary electrophoresis-tandem mass spectrometry with field-amplified sample stacking

A quantification method for imatinib (IM), its major metabolite N-desmethyl imatinib (NDI), and a degradation by-product was developed using CE–MS combined with an online concentration technique. The use of multiple reaction monitoring (MRM)–MS/MS further improved the sensitivity of this technology. Liquid–liquid extraction (LLE) using tertiary butyl methyl ether yielded high recovery and reproducibility for the pretreatment of serum samples. The recovery rate exceeded 83% for all three analytes, and was 90% for IM. To improve quantification results, a conductivity-induced online analyte concentration technique, field-amplified sample stacking (FASS), was used. The S/N ratios were improved at least 10-fold when compared with conventional capillary zone electrophoresis. The detection limits were 0.2 ng/mL for IM, 0.4 ng/mL for NDI, and 4 ng/mL for the degradation by-product. These results are superior to those previously obtained by other reported methods. The new method was validated in terms of its selectivity, intra- and interday repeatability and accuracy, and sample storage stability, following the guidelines issued by the European Medicines Agency. Considering the convenient pretreatment procedure (LLE), superior sensitivity, and fast analysis speed (<15 min), this method can be useful in the determination of imatinib levels in blood.     

An efficient solution for resolving iTRAQ and TMT channel cross‐talk

Isobaric tagging reagents such as isobaric tag for relative and absolute quantitation (iTRAQ) and tandem mass tag (TMT) typically have isotopic impurities that cause significant cross‐talk between channels. Here, we present an efficient solution to compensate for channel cross‐talk using linear algebra and find that it is between 20× and 120× faster than previous methods. We also find that the effects of channel cross‐talk are as important to manage as the effects of ratio compression because of precursor impurities, and we have released an open‐source tool to perform both types of calculations.     

基于支座反力影响线曲率差分的等截面连续梁损伤识别方法

为了实现仅采用损伤状态信息对等截面连续梁进行损伤识别,通过推导三跨不等跨连续梁在移动荷载作用下的支座反力影响线,发现支座反力影响线求曲率并作差分后的曲线在损伤位置会发生突变,基于该现象提出了一种损伤定位方法,进一步建立了损伤程度计算方法,可对损伤程度进行较精确的定量。通过一三跨连续梁和一四跨连续梁工程实例的仿真分析,证明了支座反力影响线曲率差分指标损伤定位和相应的损伤程度定量方法对等截面连续梁损伤识别具有可行性。