碳纤维中的单层石墨物相及其对力学性能的影响

依据碳纤维中各种物相的X射线衍射特性, 确认PAN基碳纤维中除了乱层石墨微晶外, 还存在大量的单层六元环C原子层面物相, 建立起两种非完整结晶物相的定量分析方法. 实验结果表明, 随着退火温度由1350 ℃上升到2400 ℃, Tx-3高强型碳纤维中的单层石墨含量由59.6%下降到34.8%, 乱层石墨含量由40.4%上升为65.2%. 与此同时, 碳纤维的拉伸强度则由3.65 GPa下降到2.05 GPa, 而延伸率也由1.04%下降到0.58%. 并对PAN基碳纤维中单层石墨对其力学性能的影响也进行了初步的探讨.     

石墨消解-原子荧光光谱法测定土壤中的总硒

为准确定量土壤硒总量,提出以逆王水(1+1)-石墨消解法消解土壤,氢化物原子荧光光谱法(HG-AFS)测定土壤总硒含量的方法.其中,对消解方式、消解时间和仪器条件进行了探讨,确定最优检测条件.称取0.2 g土壤样品加入5 mL逆王水(1+1),于石墨消解仪120℃消解1.5 h,冷却至室温后用超纯水定容至25 m L,...     

Biotic Cathode of Graphite Fibre Brush for Improved Application in Microbial Fuel Cells

The biocathode in a microbial fuel cell (MFC) system is a promising and a cheap alternative method to improve cathode reaction performance. This study aims to identify the effect of the electrode combination between non-chemical modified stainless steel (SS) and graphite fibre brush (GFB) for constructing bio-electrodes in an MFC. In this study, the MFC had two chambers, separated by a cation exchange membrane, and underwent a total of four different treatments with different electrode arrangements (anodeǁcathode)—SSǁSS (control), GFBǁSS, GFBǁGFB and SSǁGFB. Both electrodes were heat-treated to improve surface oxidation. On the 20th day of the operation, the GFBǁGFB arrangement generated the highest power density, up to 3.03 W/m³ (177 A/m³), followed by the SSǁGFB (0.0106 W/m³, 0.412 A/m³), the GFBǁSS (0.0283 W/m³, 17.1 A/m³), and the SSǁSS arrangements (0.0069 W/m⁻³, 1.64 A/m³). The GFBǁGFB had the lowest internal resistance (0.2 kΩ), corresponding to the highest power output. The other electrode arrangements, SSǁGFB, GFBǁSS, and SSǁSS, showed very high internal resistance (82 kΩ, 2.1 kΩ and 18 kΩ, respectively) due to the low proton and electron movement activity in the MFC systems. The results show that GFB materials can be used as anode and cathode in a fully biotic MFC system.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

液体电阻率测量装置的设计与制作

针对液体本身物理性质复杂、电阻率难以测量的问题,本文设计了一种新型液体电阻率测量装置.为有效采集被测对象的信息,对容器结构进行了巧妙设计,创新性地实现了石墨电极与容器一体化,提高了测量精度;利用传感技术采集电压、电流信号并将数据传入单片机,经单片机运算后通过液晶屏实时显示电阻率,具有快捷、准确测量的优点,在教学科研方面有一定实用价值.     

V(Ⅳ)/V(Ⅴ)电对在石墨毡与导电塑料复合电极上的反应机理

应用循环伏安、极化曲线和交流阻抗等电化学方法研究了V(Ⅳ)/V(Ⅴ)电对在石墨毡复合电极上反应的速控步骤.结果表明,V(Ⅳ)/V(Ⅴ)电对在石墨毡电极上的反应属准可逆过程,且氧化过程包含有后置化学转化步骤;该过程Tafel斜率的实验值为0.124,而理论计算的,以电化学步骤作为控制步骤的Tafel斜率约0.12,两者吻合很好,表明该氧化过程受电化学步骤控制;以等效电路拟合不同极化电位下的交流阻抗,得出该电化学反应阻抗远大于其他阻抗,意味着电化学过程可能是电极反应的控制步骤,与实验得到的极化曲线分析结果相一致.     

硅的原子吸收光谱分析进展

对近十年来用原子吸收光谱法测定硅的情况进行评述．重点介绍用石墨炉测定硅时，为了避免硅与石墨炉中碳形成难熔碳化硅影响测定硅的灵敏度而使用的各种化学改进剂，涂层石墨管和一些新的实验技术．引用参考文献４２篇．     

横向加热石墨炉的分析性能研究

研究了横向加热石墨炉的恒温性能和分析性能，并与Ｍａｓｓｍａｎｎ型炉进行了比较，结果表明，横向加热石墨炉具有较好的恒温性能，其原子化时间短，原子化温度低，原子吸收信号的占有时间短，特征质量ｍ０值低。