基于拉曼热测量技术的铜基复合物法兰GaN基晶体管的热阻分析

采用拉曼热测量技术结合有限元热仿真模型,分析比较新型铜/石墨复合物法兰封装与传统铜钼法兰封装的GaN器件的结温与热阻,发现前者的整体热阻比铜钼法兰器件的整体热阻低18.7%,器件内部各层材料的温度分布显示铜/石墨复合物法兰在器件中的热阻占比相比铜钼法兰在器件中的热阻占比低13%,这证明使用高热导率铜/石墨复合物法兰封装提高GaN器件热扩散性能的有效性.通过对两种GaN器件热阻占比的测量与分析,发现除了封装法兰以外,热阻占比最高的是GaN外延与衬底材料之间的界面热阻,降低界面热阻是进一步提高器件热性能的关键.同时,详细阐述了使用拉曼光热技术测量GaN器件结温和热阻的原理和过程,展示了拉曼光热技术作为一种GaN器件热特性表征方法的有效性.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

液体电阻率测量装置的设计与制作

针对液体本身物理性质复杂、电阻率难以测量的问题,本文设计了一种新型液体电阻率测量装置.为有效采集被测对象的信息,对容器结构进行了巧妙设计,创新性地实现了石墨电极与容器一体化,提高了测量精度;利用传感技术采集电压、电流信号并将数据传入单片机,经单片机运算后通过液晶屏实时显示电阻率,具有快捷、准确测量的优点,在教学科研方面有一定实用价值.     

V(Ⅳ)/V(Ⅴ)电对在石墨毡与导电塑料复合电极上的反应机理

应用循环伏安、极化曲线和交流阻抗等电化学方法研究了V(Ⅳ)/V(Ⅴ)电对在石墨毡复合电极上反应的速控步骤.结果表明,V(Ⅳ)/V(Ⅴ)电对在石墨毡电极上的反应属准可逆过程,且氧化过程包含有后置化学转化步骤;该过程Tafel斜率的实验值为0.124,而理论计算的,以电化学步骤作为控制步骤的Tafel斜率约0.12,两者吻合很好,表明该氧化过程受电化学步骤控制;以等效电路拟合不同极化电位下的交流阻抗,得出该电化学反应阻抗远大于其他阻抗,意味着电化学过程可能是电极反应的控制步骤,与实验得到的极化曲线分析结果相一致.     

硅的原子吸收光谱分析进展

对近十年来用原子吸收光谱法测定硅的情况进行评述．重点介绍用石墨炉测定硅时，为了避免硅与石墨炉中碳形成难熔碳化硅影响测定硅的灵敏度而使用的各种化学改进剂，涂层石墨管和一些新的实验技术．引用参考文献４２篇．     

横向加热石墨炉的分析性能研究

研究了横向加热石墨炉的恒温性能和分析性能，并与Ｍａｓｓｍａｎｎ型炉进行了比较，结果表明，横向加热石墨炉具有较好的恒温性能，其原子化时间短，原子化温度低，原子吸收信号的占有时间短，特征质量ｍ０值低。     

单链脱氧核糖核酸在石墨电极表面固定化的研究

用５％（Ｖ／Ｖ）３－氨基丙基三乙氧基硅烷（ＰｒＮＨ２硅烷Ⅱ）在石墨电极表面硅烷化以导入氨基（－ＮＨ２）,然后用乙基－（３－二甲基丙基）碳二亚胺盐要卤）ＥＤＣ）关活化剂,将单链ＤＮＡ（共价固定在石墨电极表面。采用显微分光光度法、红外光谱法和电化学方法对电极表面的ｓｓＤＮＡ层进行了表征,并用紫外－可见光谱法对电极表面固定化ｓｓＤＮＡ的杂交特性进行了研究。结果表明,ｓｓＤＮＡ可以比较均匀地固定在石墨电极     

石墨消解-电感耦合等离子体质谱(ICP-MS)法测定铜精矿中汞的含量

称取0.2g样品于50mL样品管中,以5mL硝酸-盐酸(1∶1)混合溶液为溶剂,采用石墨消解仪对样品进行前处理。以159 Tb作内标元素补偿基体效应,用电感耦合等离子体质谱(ICP-MS)法对铜精矿中的202 Hg进行测定。结果显示,在0～50μg/L的浓度范围内,校准曲线线性相关系数在0.999 9以上,方法检出限0.019μg/L。对铜精矿标准样品的检测结果与标准值相符。铜精矿中汞的浓度在0.94～15.06μg/g时,与直接测汞仪检测结果对比基本一致。     

石蜡/膨胀石墨/石墨烯复合相变储热材料的制备及性能

以石蜡(PA)作为相变储热材料、 膨胀石墨(EG)作为主导热材料和支撑材料, 石墨烯气凝胶(GA)作为导热增强材料和辅支撑材料制备了PA/EG/GA复合相变材料, 研究了GA添加量对复合相变材料相变温度、 相变潜热、 导热性能以及循环稳定性的影响. 结果表明, 所制备的80%PA-17%EG-3%GA复合相变材料导热性能良好, 循环稳定性出色. 与80%PA-20%EG复合材料相比, 该材料的相变温度、 相变潜热以及循环稳定性无明显变化, 但导热系数由4.089 W/(m·K)提升到了5.336 W/(m·K), 显示出良好的应用前景.