The effects of different dispersion compensation ratios on nonlinear single channel and WDM systems

The effects of the compensation ratio with dispersion post-compensation on nonlinear single channel and WDM systems with 10 Gb/s per channel are numerically investigated. When the transmission signal per channel is 10 Gb/s RZ pulse and the amplifier span is 50 km, proper undercompensation can enhance the performance of the nonlinear single channel system and the nonlinear WDM system. But the enhanced distance of the nonlinear WDM system is not as obvious as that of the single channel system, because the cross-phase-modulation effect plays an important role in the nonlinear WDM system.     

Stability of the conditions for excitation of atomic spectra in plasma produced on exposure of copper alloys to laser radiation

We show that the temperature of plasma produced by exposure of copper-zinc alloy specimens to laser radiation changes little (within the limits of random errors) with a change in the conditions of the laser effect and chemical composition of the specimens. With use of electric discharges (a low-voltage spark), systematic changes in the temperature of the plasma are observed when the chemical composition of copper-zinc alloys changes. Institute of Molecular and Atomic Physics of the National Academy of Sciences of Belarus, 70, F. Skorina Ave., Minsk, 220072, Belarus. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 3, pp. 319–321, May–June, 1998.     

用蓝色光二极管测量掺钛蓝宝石飞秒激光脉冲宽度

用蓝色光二极管双光子跃迁光电流信号测量掺钛蓝玉石飞秒激光脉冲宽度，实验高精度地记录了二阶干涉自相关曲线及其精细结构，由于用蓝色二极管双光子跃迁代替了常用的二次谐波，而且光信号直接转化为电信号，从而使飞秒激光脉冲宽度的测量大为简化。     

Two-dimensional measurement of laser-induced target movement by face-on interferometry

Initial movement of laser irradiated foil targets has been measured by face-on interferometry with two-dimensional resolution. This interferometric method provides direct and precise information about the initial movement of the rear surface of the target compared with conventional diagnostics. Target movement of 20–500 nm from the original position has been observed.     

Mode-locked lasers and ultrashort light pulses

This article reviews some aspects of the generation of very short optical pulses using mode-locked lasers, with the emphasis laid on pulsed laser systems. Active and passive mode-locking is discussed, and the problem of measuring ultrashort light pulses is considered. A survey of some commonly used sources and techniques for the generation of ultrashort light pulses follows. The paper concludes with a short account of limitations in the generation and propagation of these pulses.     

Two-color cross-correlation of fs-laser pulses by two-photon induced photoconductivity for near and far field optical measurements

Two-color two-photon induced photoconductivity in a GaAsP diffusion type photodiode is demonstrated by measuring femtosecond cross-correlation functions for widely separated wavelength pairs of 775 and 1300 nm. Results are obtained for a range of tunable wavelengths and average powers of the incident lasers by measuring the two-photon induced photocurrent as a function of the optical delay between the pulses. The temporal autocorrelation of femtosecond laser pulses in the near-field of a small diameter aluminum coated optical fiber tip is also obtained with the same photodiode method for single colors.     

Geometric-optical reconstruction of a wavefront experimental realization with femtosecond laser pulses

The mechanism of wavefront reconstruction by geometric-optical reflection of reconstruction radiation from surfaces with constant phase differences between the object and reference waves has been investigated. The main difference between this mechanism and a holographic one is the absence of diffraction of the reconstructing radiation by the periodic structure and as a consequence the achromatism of the reconstruction process. Incoherent continuous radiation and ultrashort laser pulses were used in the experiments. The effect of achromatic reconstruction has been obtained after recording the interference of counterpropagating 30–40 fs pulses from an Al₂O₃:Ti³⁺ laser in bulk media.     

Application of optimal control to CPMG refocusing pulse design

We apply optimal control theory (OCT) to the design of refocusing pulses suitable for the CPMG sequence that are robust over a wide range of B(0) and B(1) offsets. We also introduce a model, based on recent progress in the analysis of unitary dynamics in the field of quantum information processing (QIP), that describes the multiple refocusing dynamics of the CPMG sequence as a dephasing Pauli channel. This model provides a compact characterization of the consequences and severity of residual pulse errors. We illustrate the methods by considering a specific example of designing and analyzing broadband OCT refocusing pulses of length 10t(180) that are constrained by the maximum instantaneous pulse power. We show that with this refocusing pulse, the CPMG sequence can refocus over 98% of magnetization for resonance offsets up to 3.2 times the maximum RF amplitude, even in the presence of ±10% RF inhomogeneity.     

Efficient dispersion tailoring by designing alternately arranged dispersion compensating fibers and fiber amplifiers to create self-similar parabolic pulses

The parabolic similariton pulse formation by alternate arrangements of passive and active dispersion compensating fibers (DCFs) is presented here. These combinations of passive and active DCFs with constant core radii and constant nonlinearities are suggested as equivalent profiles of a dispersion tailored fiber amplifier in normal dispersion regime. The dispersion tailored fibers, usually known as dispersion decreasing fibers (DDFs) in normal dispersion regime, are capable of producing linearly chirped parabolic self-similar pulses. The DDF is designed and optimized with proper choice of fiber parameters so that considerable variation of nonlinearity can be achieved, which in turn enhances the effective gain coefficient of the fiber. Inclusion of this nonlinear variation along the DDF amplifier length leads to obtain the simulated output pulses with very small misfit parameters with respect to perfect parabolic pulse at sufficiently reduced optimum length. At the same time to avoid the fabrication difficulties of the DDF, the alternately arranged passive and active DCFs are suggested as suitable alternatives of the DDF. The performances of the cascaded systems for generation of self-similar parabolic pulses are compared with that of the DDF amplifier as well as combined systems consisting of DCFs with equal gain. The results show that the proposed alternately arranged cascaded system with less pumping requirements, are efficient enough to produce similar parabolic pulses as compared to the previously designed DDF, even when considerable amount of splice loss at each joint is included.     

Measurement of subpicosecond optical waveforms using a resonator-based phase modulator

We propose a method for the measurement of periodic optical waveforms based on the use of an electrooptic phase modulator placed in an optical Fabry-Perot or ring resonator. Significant broadening of the modulation spectrum extends the recently developed method of periodic modulation for pulse characterization into femtosecond scales. We numerically demonstrate the characterization of a 300-fs optical pulse. We also present a technique based on the temporal fractional Talbot effect for restoration of the pulse phase profile. After fast linear processing, subpicosecond pulses will be observed on the screen of a real-time oscilloscope. This complete characterization of optical pulses is entirely linear and therefore highly sensitive and simple in implementation.