新型氧离子导体La2Mo1.8Ga0.2O9陶瓷的合成及其电性能

通过高温固相合成法首次合成了La₂Mo_1.8Ga_0.2O₉陶瓷样品. 粉末XRD结果表明, 该样品为单一立方相La₂Mo₂O₉结构. 以陶瓷样品为固体电解质、多孔性铂为电极, 采用交流阻抗谱、气体浓差电池、氧泵等方法研究了样品在600～1000 ℃下各种气氛中的离子导电特性. 结果表明, 氧浓差电池电动势的实测值与理论值吻合得很好, 氧离子迁移数为1, 表明该陶瓷样品在该温度下氧气气氛中为一纯氧离子导体; 氧泵(氧的电化学透过)实验结果进一步证实了该样品在氧气气氛中为一纯氧离子导体; 在氧分压p(O₂)＝10^－5～10⁵ Pa的高氧分压气氛中, 电导率与氧分压变化基本无关, 表明在该氧分压范围内样品为纯离子导体, 这与氧浓差电池电动势测定结果相吻合; 在低氧分压为10^－5～10^－15 Pa范围内, 总电导率随氧分压降低而稍有升高, 表明在该氧分压范围样品为氧离子与电子的混合导体; 在600～1000 ℃下氧离子电导率＞10^－2 S•cm^－1, 显著高于母体La₂Mo₂O₉的氧离子电导率, 1000 ℃时的氧离子电导率为0.07 S•cm^－1.     

Computational study of epoxy-amine reactions

Density functional theory calculations were carried out for the title reactions. Ethylene oxide and methylamine were adopted as reactants. Amine clusters (dimer, trimer, tetramer, and pentamer) were considered, because the combination of one oxide and one amine molecule gave a large activation energy. An amine tetramer was found to react favorably with the oxide via various zwitterionic intermediates. A back-side S(N)2 nucleophilic attack of one amine and the subsequent proton relay up to the front side provide a stabilized reaction field. The amine-alcohol mixed reactant may react readily with the oxide, because the alcoholic O-H group is in contact with the oxide oxygen with the strong hydrogen-bond stabilization.     

A comparative study on the photochemistry of two bipyridyl derivatives: [2,2'-bipyridyl]-3,3'-diamine and [2,2'-bipyridyl]-3,3'-diol.

The two isoelectronic bipyridyl derivatives, [2,2'-bipyridyl]-3,3'-diamine and [2,2'-bipyridyl]-3,3'-diol, are experimentally known to undergo very different excited-state double-proton-transfer processes, which result in fluorescence quantum yields that differ by four orders of magnitude. Herein, density functional theory (DFT), time-dependent DFT (TDDFT), and complete active space self-consistent field (CASSCF) calculations are used to study the double-proton-transfer processes in the ground and first singlet pi-->pi* excited state. The quantum-chemistry calculations indicate 1) the existence of only one energy minimum in the ground electronic state corresponding to reactants (thus avoiding the possibility of a fast fluorescent relaxation process from the photoproducts region), 2) an endoergic process of the complete double proton transfer, and 3) the presence of a conical intersection in the excited intermediate region of [2,2'-bipyridyl]-3,3'-diamine. These facts explain the very low fluorescence quantum yield in [2,2'-bipyridyl]-3,3'-diamine compared to [2,2'-bipyridyl]-3,3'-diol.     

Ultrasensitive fluorescent probe for the hydrophobic range of solvent polarities

The new 3-hydroxychromone derivative 2-(6-diethylaminobenzo[b]furan-2-yl)-3-hydroxychromone (FA) displays a dramatic solvent-dependent transformation of fluorescence spectra in the range of low-polarity solvents. The two well-separated emission bands change their relative intensities so that the short-wavelength band being of a very low intensity in hexane becomes dominant in the more polar ethyl acetate and trichloromethane. We suggest the participation in this effect of excited-state intramolecular proton transfer, which is characteristic for other 3-hydroxychromone and 3-hydroxyflavone derivatives, in the range of solvents of much higher polarities. Because of these unique properties, a number of spectroscopic parameters (positions of absorption and two fluorescence maxima, the ratio of their intensities and the fluorescence quantum yield) can be measured in this solvent range with multiparametric analysis of the data. In terms of solvent polarity, the shifts in both emission bands and their intensity ratio demonstrate a good correlation with empirical polarity scales E_T^N, P_y and SPP, while the absorption spectra reveal some deviations for the tested oxygen-containing solvent molecules. A good cross-correlation is observed between fluorescence spectral shifts and the ratio of band intensities. The latter provides the means for a dramatic amplification of solvent response. Thus, a new approach for ultrasensitive scaling and probing the solvent polarity in the low-polararity range can be suggested. It involves very simple ratiometric measurements at two emission bands and can be posed for a variety of applications. We present examples of these applications for distinguishing of polarities between methylated benzene derivatives, for quantitative assay of polar impurities in low-polar solvents and for detection of the changes of solvent polarity as a function of temperature.     

The phonon-assisted proton transfer between hydrazinium cations in (N2H5)2HMF6·2H2O (M∈{Ga, Al, Fe}) type compounds. FT IR and quantum theoretical study

FT IR spectra of a series of compounds with a general formula (N₂H₅)₂HMF₆·2H₂O (where M∈{Ga, Al, Fe}) were recorded at variable temperatures (from ∼100 to 300 K, at 10 K intervals). The appearance of the spectral region of ν(N-N) modes due to hydrazinium cations further supports the conclusions regarding the N₂H₅⁺?H⁺?N₂H₅⁺ hydrogen bond potential well based on Raman spectroscopic data [J. Raman Spectrosc. 28 (1997) 315]. The appearance of two bands corresponding to the ν(N-N) modes in the low temperature FT IR spectra that merge into one upon heating is a clear evidence of a symmetric potential well through which a phonon-assisted proton transfer (PAPT) occurs at higher temperatures. Ab initio MP2/6-311++G(2d,p) quantum chemical study of the proton transfer potential within the N₂H₅⁺?H⁺?N₂H₅⁺ cluster confirmed its double-minimum character. The first-order saddle point found on the MP2/6-311++G(2d,p) potential energy hypersurface corresponds to a centrosymmetric structure (C_2h symmetry), with the proton placed at the inversion center. The potential energy curve along the tunnelling coordinate was calculated by the intrinsic reaction coordinate (IRC) methodology, leading to an adiabatic PT barrier height of 3.94 kcal mol⁻¹ and a tunneling rate of 1.98 s⁻¹. The corresponding MP4(SDTQ)/6-311++G(2d,p)//MP2/6-311++G(2d,p) value of the adiabatic PT barrier height is 4.26 kcal mol⁻¹.     

Developments on carbon dioxide reduction: Their promise,achievements, and challenges

CO₂ reduction processes continue to be developed for electrosynthesis, energy storage applications, and environmental remediation. A number of promising materials have shown high activity and selectivity to target reduction products. However, the progress has been mainly at a small laboratory scale, and the technical challenges of large scale CO₂ reduction have not been considered adequately. This review covers recent advancements in catalyst materials and cell designs. The leading materials for CO₂ reduction to a number of useful products are presented with their corresponding cell and reactor designs. The latest efforts to progress to industrially relevant scales are discussed, along with the challenges that must be met for carbon dioxide reduction to be a viable route for mass scale production.     

SYNTHESIS AND PROPERTIES OF SULFONATED POLY（ARYLENE ETHER） CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.     

水杨酸-2’-乙基己基酯在胶束中的增溶位点

考察了阳离子、非离子和阴离子表面活性剂存在下水杨酸-2’-乙基己基酯(EHS)的吸收光谱和激发态分子内质子转移(ESIPT)荧光光谱. 结果表明, EHS可增溶在胶束中, 2’-乙基己基碳链朝向胶束内核, 而水杨酸基朝向胶束-水界面; 胶束环境有利于EHS分子对紫外光的吸收和分子内氢键的形成, 从而使ESIPT 荧光显著增强, 激发态分子以发射可见光和非辐射去活化方式衰减; 并根据EHS和表面活性剂分子的结构和大小, 解释了EHS分子在胶束中的结合位点, 荧光猝灭和酯水解的光谱测量进一步为此结合位点提供了佐证.     

Structure and stability of hydrogen fluoride complexes with N,N-dimethylformamide

The structure, stability, and paths of formation of 11 (HF)_m(DMF)_n heterocomplexes (m = 1–4, n = 1, 2) were studied in terms of the B3LYP/6-31++G(d, p) density functional calculation. The results of this calculation suggest that: a) addition of hydrogen fluoride molecules to the (HF)_mDMF cyclic fragment is the basic tendency in complex formation in the HF-DMF system; b) data about the structure and properties of stable molecular forms that prevail in N,N-dimethylformamide solutions of hydrogen fluoride can be obtained by quantum chemical calculations for (HF)_mDMF complexes (m = 5–10).     

3-苯基-1-丁炔-3-醇质谱碎裂中[C8H7]^+的结构及分子内质子迁移反应

报道了3-苯基-1-丁炔-3-醇的常规电子轰击质谱(EIMS)。利用碰撞诱导解离(CID)技术研究了质谱碎裂过程中产生的[C8H7]^+的气相离子结构。同时, 氘代同位素交换、亚稳(MI)和CID实验进一步证实了m/z 103离子的形成并不是分子离子的质谱碎裂中顺次失去甲基自由基和中性CO分子的直接氢迁移的协同反应, 而是在失去CO分子前后发生了二次质子迁移反应的逐步过程。在此基础上提出了一种独特的双分子质子键合复合物中间体的碎裂机理。