中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。     

离心泵快速启动过程外部特性的试验研究

介绍离心泵快速启动试验装置和试验方法,对一台出口直径为80 mm的小型管道离心泵进行试验研究,分别测试了试验泵的稳态性能和各项瞬态性能,比较分析了两者的区别。结果显示,启动过程中,离心泵的扬程紧跟转速到达最大值,转速稳定后的瞬态性能与稳态假设对应,流量和扬程的上升历程与管路阻力特性直接相关,而转速与其基本无关; 在启动初始阶段,无量纲扬程呈现很大值,继而迅速减小到低于稳态假设值,表现出明显的瞬态效应。     

A compact optical heterodyne interferometer by optical integration and its application

A compact high-resolution optical heterodyne interferometer combining a two-frequency light module and a minute optical system is described. The light module, which generates two independent frequencies of light, is fabricated by proton exchange method on LiNbO₃ substrate. We report an experiment evaluating measurement accuracy using a micro-displacement measurement system which incorporates this interferometer. Results of the experiment with a standard thickness sample show high thermal stability with maximum measurement error of 1.8 nm at a temperature from 19°C to 33°C. The system was used to measure the hysteresis of a piezoelectric element for displacements of several nm, thereby making it possible to analyze the system quantitatively in practice.     

电热泵用于蔬菜温室供热的经济性分析

现代化蔬菜温室是我国都市农业发展中的一个重要组成部分，目前这类温室的冬季加热均以燃煤方式为主．伴随着越加严重的城市环境污染，温室供热系统也面临着改造问题，需要引入清洁供热方式，热泵供热是其中的一种．本文以上海地区现代化蔬菜温室为研究对象，分析了蔬菜温室中使用电热泵供热的运行成本，并与燃煤供热方式进行了对比．就热泵供热系统在温室中的应用前景及可行性、经济性进行了分析，为热泵在温室供热系统中的应用提供了可参考依据．     

InAs/GaSb/AlSb resonant tunneling spin device concepts

We discuss device concepts for creating spin-polarized current sources without external magnetic fields, using non-magnetic 6.1 Å semiconductor resonant tunneling structures. Spin filters, spin pumps, and spin transistors that exploit structural and bulk inversion asymmetries will be examined.     

Quantum-Chemical Evaluation of the Protolytic Properties of Thiophenols

The enthalpies and free energies of proton affinity (PA) were calculated by the PM3 method for 27 thiophenoxide anions. For thiophenols, linear correlation has been found between the PAs and the values of pK _a measured by different authors in aqueous acetone, aqueous ethanol, and methanol media. The dependences found permit one to predict a priori the protolytic properties of thiophenols. The differential effects of aqueous ethanol media with different ethanol contents on thiophenol acidity were evaluated based on quantum-chemical data.Original Russian Text Copyright © 2004 by A. N. Pankratov and A. V. Shalabai__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 800–806, September–October, 2004.     

27,28P+28Si总反应截面增强及可能相关的机制

测量了27,28P和相应同中子异位素在28Si靶上的中能反应截面.测得N=12和13同中子异位素的反应截面在Z=15处突然增大.对Z≤14同中子异位素和28P的实验数据结果可以用改进的光学极限近似的Glauber理论很好地描述.28P的反应截面能够用扩大核芯以改进的Glauber理论来解释.但是,用改进光学极限和少体近似的Glauber理论却低估了27P的实验数据.理论分析表明,扩大的核芯加质子晕可能是响应27P+28Si反应截面增强的机制. The reaction cross sections of~(27,28)P and the corresponding isotones on Si target were measured at intermediate energies. The measured reaction cross sections of the N=12 and 13 isotones show an abrupt increase at Z=15. The experimental results for the isotones with Z≤14 and~(28)P can be described well by the modified Glauber theory of the optical limit approach. The enhancement of the reaction cross section for~(28)P could be explained by the modified Glauber theory with an enlarged core. Theoretical ana...     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006