浮栅ROM器件辐射效应机理分析

分析了浮栅ROM器件的辐射效应机理，合理地解释了实验中观察到的现象.指出辐射产生的电子空穴对在器件中形成的氧化物陷阱电荷和界面陷阱电荷是导致存储单元及其外围电路出现错误的原因.浮栅ROM器件的中子、质子和⁶⁰Co γ辐射效应都是总剂量效应 . 关键词： FLASH ROM EEPROM 中子 质子 60Co γ')" href="#">⁶⁰Co γ 总剂量效应     

半导体带电粒子探测器的研制及其在空间物理中的应用

阐述了空间辐射环境监测的意义,描述了半导体带电粒子探测器的研制及由其组成的望远镜系统在空间物理中的应用,并给出了用此探测器在卫星上进行地球辐射环境监测、太阳质子事件和地磁暴探测的部分结果.     

Sulfonated poly(aryl ether ketone)s containing naphthalene moieties obtained by direct copolymerization as novel polymers for proton exchange membranes

A series of sulfonated poly(aryl ether ketone)s (SPAEKs) were prepared by aromatic nucleophilic polycondensation of 2,6‐dihydroxynaphthalene with 5,5′‐carbonyl‐bis(2‐fluorobenzenesulfonate) and 4,4′‐difluorobenzophenone. The structure and degree of sulfonation (DS) of the SPAEKs were characterized using ¹H NMR spectroscopy. The experimentally observed DS values were close to the expected values derived from the starting material ratios. The thermal stabilities of the SPAEKs were characterized by thermogravimetric analysis, which showed that in acid and sodium salt forms they were thermally stable in air up to about 240 and 380 °C, respectively. Transparent membranes cast from the directly polymerized SPAEKs exhibited good mechanical properties in both dry and hydrated states. The dependence of water uptake and of membrane swelling on the DS at different temperatures was studied. SPAEK membranes with a DS from 0.72 to 1.60 maintained adequate mechanical properties after immersion in water at 80 °C for 24 h. The proton conductivity of SPAEK membranes with different degrees of sulfonation was measured as a function of temperature. The proton conductivity of the SPAEK films increased with increased DS, and the highest room temperature conductivity (4.2 × 10^?2 S/cm) was recorded for a SPAEK membrane with a DS of 1.60, which further increased to 1.1 × 10^?1 S/cm at 80 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2866–2876, 2004     

Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

Kinetics of proton transfer in a green fluorescent protein: A laser-induced pH jump study

The sub-millisecond protonation dynamics of the chromophore in S65T mutant form of the green fluorescent protein (GFP) was tracked after a rapid pH jump following laser-induced proton release from the caged photolabile compoundo-nitrobenzaldehyde. Following a jump in pH from 8 to 5 (which is achieved within 2 μs), the fluorescence of S65T GFP decreased as a single exponential with a time constant of ∼90 μs. This decay is interpreted as the conversion of the deprotonated fluorescent GFP chromophore to a protonated non-fluorescent species. The protonation kinetics showed dependence on the bulk viscosity of the solvent, and therefore implicates bulk solvent-controlled protein dynamics in the protonation process. The protonation is proposed to be a sequential process involving two steps: (a) proton transfer from solvent to the chromophore, and (b) internal structural rearrangements to stabilize a protonated chromophore. The possible implications of these observations to protein dynamics in general is discussed     

地源热泵的运行特性模拟研究

依据圆柱源理论,建立起了耦合地面热泵机组和地下埋管换热器特性的模拟模型,该模型可用于长期运行的地源热泵系统的短时间步长运行特性模拟。探讨了模拟过程中有关参数的确定方法,并运用所建模型对地源热泵的冬季和夏季运行特性进行了模拟。运行特性模拟与实验数据的验证结果表明,所建模型可以对地源热泵的运行特性做出符合实际的预测。     

单粒子势模型下价核子的密度分布

依据实验事实，利用单粒子势模型，计算了一些核态外层价核子的密度分布.计算给出了价核子在核外部分布的概率和贡献，以此作为晕核态的判断标准.通过研究均方根半径随结合能变化的规律，指出了晕核态存在的条件，尤其是质子晕核态存在的条件.这些对判断和寻找晕核态有现实的指导意义. 关键词： 单粒子势模型 价核子 密度分布 中子晕核态 质子晕核态     

风冷热泵冷热水机组动态过程仿真

本文给出了风冷热泵冷热水机组动态过程模型。系统的高、低压段被分成制冷剂侧、管壁、以及水或空气侧三个控制容积。针对每个控制容积建立了质量和能量平衡的微分方程。由于压缩机、热力膨胀阀阀体、以及四通换向阀具有较小的热惯性,因而采用稳态模型描述压缩过程、膨胀过程、以及内泄露过程。膨胀阀感温包中的制冷剂温度对于蒸发器出口温度的延迟用一阶惯性环节来描述。通过“预测-校正”和“自适应步长”方法实现系统仿真。仿真结果与测试数据吻合良好。     

轴流泵端壁区域流动三维粘性数值计算

本文采用通用流场分析软件FLUENT,基于N-S方程,选用RNG κ—ε湍流模型与SIMPLEC算法,对轴流泵叶轮内部(及端壁间隙)流动进行了三维粘性数值计算。通过实验验证,表明数值计算结果和实测数据吻合较好。详细分析了叶顶附近流场形态以及叶轮出口轴向、周向速度分布,进行了性能预估。并给出了实验装置图。     

激光二极管端面抽运的棒状Yb：YAG激光器

分析了影响激光二极管抽运Yb：YAG激光器调Q效率的参量，推导了激光二极管端面脉冲抽运Yb：YAG晶体的速率方程，解出了双程抽运情况下的净抽运量子产率。利用数值计算方法，模拟了净抽运量子产率与晶体长度，抽运光脉冲宽度等关系，得出晶体长度的优化可以提高Yb：YAG激光器输出效率。计算了词Q Yb：YAG激光器的最大增益、最大储能，分析了放大自发辐射对于Yb：YAG能量存储的影响。同时给出了激光二极管端面抽运调Q Yb：YAG优化设计方法。这些分析和计算为实际器件的研制提供参考。