Simultaneous construction of a polyether backbone and a variety of keto side chains by three‐component polycondensation: An improved method for the use of a variety of silyl enol ethers

For the synthesis of polyethers with a variety of keto side chains in a one‐step reaction, the three‐component polycondensation of dialdehydes, diol disilyl ethers, and silyl enol ethers of ketones was investigated. The method of monomer addition strongly affected the molecular weight of polymers and was optimized to yield high molecular weight polymers by model reactions. A variety of dialdehydes, diol disilyl ethers, and silyl enol ethers were polymerized in the presence of a catalytic amount of triphenylmethyl (trityl) perchlorate in CH₂Cl₂ at −78 °C according to the method of monomer addition. This polymer synthesis was unusual in that it concurrently constructed both the polyether backbone and the keto side chains from three starting compounds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 179–188, 2000     

北美海蓬子甜菜碱醛脱氢酶基因的克隆及表达载体构建

以北美海蓬子种子为材料, 采用RACE技术获得北美海蓬子BADH基因的cDNA全长序列. 结果表明: BADH基因cDNA全长为1836bp, 其中开放阅读框(ORF)为1503bp, 编码500个氨基酸, 预测蛋白的分子量为54.5kDa, 理论等电点为5.31. 推测出BADH氨基酸中含有甜菜碱醛脱氢酶家族高度保守的十肽序列(VTLELGGKSP)及与酶功能相关的半胱氨酸残基(Cys). 序列比对和系统进化树显示, 北美海蓬子与盐节木和盐穗木的亲缘关系最近, 同源性达94%. 并构建了植物表达载体pCAMBIA3301-BADH, 将其成功导入到农杆菌EHA105中, 为进一步研究该基因的功能奠定了基础.     

Brönsted酸性离子液体催化芳香醛和2-甲基喹啉反应合成1,3-二(2-喹啉基)丙烷化合物

以Brönsted酸性离子液体1-乙基-3-丁基咪唑对甲苯磺酸盐为催化剂, 将芳香醛和2-甲基喹啉类化合物在无溶剂或甲苯中于120 ℃反应48 h, 制备了一系列的1,3-二(2-喹啉基)丙烷化合物, 产率56%~92%, 产物结构经核磁共振波谱和高分辨质谱确证. 该方法具有简便易行、 产率较高等特点.     

硅胶键合膦的制备及其对铑络合物催化1-辛烯氢甲酰化反应的影响

以硅胶为载体, 采用键合接枝法将2-(二苯膦基)乙基三乙氧基硅烷(DPPES)共价键合于硅胶表面, 制备了性能优良的硅胶键合型膦配体(以SiO₂(PPh₂)表示). 以SiO₂(PPh₂)为配体, Rh(acac)(CO)₂ (acac:乙酰丙酮)为催化前体, 负载铑膦络合物催化剂(SiO₂(PPh₂)/Rh)在1-辛烯氢甲酰化反应中原位生成. 对生成的负载型催化剂和硅胶键合型膦配体进行了傅里叶变换红外(FTIR)光谱表征, 考察了膦/铑摩尔浓度比([P]/[Rh])、温度等因素对铑催化的长链1-辛烯氢甲酰化反应的影响. 结果表明, 膦/铑摩尔浓度比的增加能显著提高反应的成醛选择性, 降低铑的流失. 在[P]/[Rh]=12、363 K、2.0 MPa、1.5 h 的温和反应条件下, 1-辛烯转化率和成醛选择性分别可达98.4%和95.3%, 其催化活性与DPPES或三苯基膦(TPP)作配体时的均相铑催化相近. 催化剂循环4 次后, 反应活性无明显下降, 1-辛烯转化率均在97.0%左右, 经电感耦合等离子体原子发射光谱(ICP-AES)检测,有机相中铑流失低于0.1%.     

Selective surface chemistry of allyl alcohol and allyl aldehyde on Si(1 0 0)2×1: Competition of [2 + 2] CC cycloaddition with O-H dissociation and with [2 + 2] CO cycloaddition in bifunctional molecules

Competition between the CC functional group with the OH group in allyl alcohol and with the CO group in allyl aldehyde in the adsorption and thermal chemistry on Si(1 0 0)2×1 has been studied by X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD), as well as density-functional theory (DFT) calculations. The similarities found in the C 1s and O 1s spectra for both molecules indicate that the O-H dissociation product for allyl alcohol and [2 + 2] CO cycloaddition product for allyl aldehyde are preferred over the corresponding [2 + 2] CC cycloaddition products. Temperature-dependent XPS and TPD studies further show that thermal evolution of these molecules gives rise to the formation of ethylene, acetylene, and propene on Si(1 0 0)2×1, with additional CO evolution only from allyl alcohol. The formation of these desorption products also supports that the [2 + 2] CC cycloaddition reaction does not occur. In addition, the formation of SiC at 1090 K is observed for both allyl alcohol and allyl aldehyde. We propose plausible surface-mediated reaction pathways for the formation of these thermal evolution products. The present work illustrates the crucial role of the Si(1 0 0)2×1 surface in selective reactions of the Si dimers with the O−H group in allyl alcohol and with the CO group in allyl aldehyde over the CC functional group common to both molecules.     

水相条件下1,4-二氢吡啶衍生物的合成与芳构化

将醛、乙酰乙酸乙酯和醋酸铵的多组分反应引入到水相回流条件下, 合成了一系列具有生物和药物活性的1,4-二氢吡啶化合物. 在此基础之上, 向反应体系中直接加入氧化剂MnO2, “一锅法”生成了芳构化的吡啶衍生物, 将原来Hantzsch酯的合成与芳构化在“一锅”里实现, 缩减了反应步骤, 提高了反应效率.