On-line determination of organophosphorus pesticides in water by solid-phase microextraction and gas chromatography with thermionic-selective detection

This paper describes the extraction of 49 organophosphorus pesti-cides (OPPs) from water samples using solid-phase microextraction (SPME). Three fibers, including a 15-μm XAD-coated fiber, a 85-μm polyacrylate-coated fiber, and a 30-μm polydimethylsilox-ane-coated fiber (PDMS), were evaluated here. The effects of stirring and the addition of NaCl to the sample were examined for the polyacrylate-coated fiber. The precision of the technique was examined for all three fibers and the extraction kinetics were investigated using the XAD- and polyacrylate-coated fibers. With some exceptions, the XAD- and polyacrylate-coated fibers performed better than the PDMS-coated fiber. The superiority of the XAD-nd polyacrylate-coated fiber. The superiority of the XAD- and polyacrylate-coated fibers over the PDMS-coated fibers can be attribuibuted to the aromatic functionalities of the XAD and the polar functionalities in the polyacrylate. The relatively high percent RSDs indicate that the SPME technique needs to be further refined before it can be used for anything other than screening. A more effective form of agitation than mechanical stirring may be neccessary to reduce variability and achieve a faster equilibrium between the sample and the SPME fiber.     

Preparation of holographic gratings of liquid crystals dispersed in polyurethane acrylates under controlled reaction conditions.

Transmission gratings of holographic polymer-dispersed liquid crystals (HPDLC) are prepared under controlled reaction conditions by adding various amounts of chain-transfer agent (CTA). The resulting films have a higher gel content with lower cross-link density, less dark reaction, less grating shrinkage with much smoother LC/polymer interfaces, smaller induction period, and fast saturation of diffraction efficiency, which shows a maximum of 95 % with 1 % CTA. An optimum LC content of 35 % is verified on the basis of morphology and reaction kinetics.     

MOLECULAR ENGINEERING STUDIES ON NONTHROMBOGENIC BIOMATERIALS——A NOVEL CLASS OF NONTHROMBOGENIC BIOMATERIALS WITH ZWITTERIONIC STRUCTURE OF CARBOXYBETAINES

N,N-dimethyl-N-methacryloyloxyethyl-N-carboxyethyl ammonium (DMMCA) was graft-copolymerized onto the surface of segmented poly(ether urethane) (SPEU) and PE film. The carboxybetaine structure on SPEU and PE film surfaces was confirmed by ATR-FTIR, XPS and water contact angle measurements. Through the experiments with platelet adhesion and protein adhesion assay in vitro, the two materials studied, including poly-DMMCA gel, all show excellent nonthrombogenicity. This confirms once again that the zwitterionic molecular structure on the surfaces of materials is essential for improving their nonthrombogenicity and biocompatibility.     

Irreversible and reversible phase transitions of alkyl monolayers. Gas chromatographic evidence of polar solvent influence on the adsorbing properties of the layer

Summary Further to Gilpin's observations in liquid chromatography of the irreversible transformation of alkyl grafts, following the replacement of an organic mobile phase by an aqueous one, we describe some gas chromatographic experiments which lead to similar (log V_s, I/T) plots, as a consequence of the same solvent release process.We use paraffin films on siliceous supports or hydroxylated liquid substrates or C₂₂-alkyl bonded silica. These experiments demonstrate that this irreversible transition and the melting-like reversible transition are completely different phenomena. They confirm the existence of at least three kinds of monomeric alkyl films.     

Differential protonation and dynamic structure of doxylamine succinate in solution using 1H and 13C NMR

A protonation and dynamic structural study of doxylamine succinate, a 1:1 salt of succinic acid with dimethyl-[2-(1-phenyl-1-pyridin-2-yl-ethoxy)ethyl]amine, in solution using one- and two-dimensional 1H and 13C NMR experiments at variable temperature and concentration is presented. The two acidic protons of the salt doxylamine succinate are in 'intermediate' exchange at room temperature, as evidenced by the appearance of a broad signal. This signal evolves into two distinct signals below about -30 degrees C. A two-dimensional 1H-1H double quantum filtered correlation experiment carried out at -55 degrees C shows protonation of one of the acidic protons to the dimethylamine nitrogen. A two-dimensional rotating frame 1H-1H NOE experiment at the same temperature reveals that the other proton remains with the succinate moiety. Comparison of the 1H and 13C chemical shifts and the 13C T1 relaxation times of the salt with those of the free base further substantiate the findings.     

Phase Diagram of the System NaF-KF-AlF3

The phase diagrams of the binary system KF-AlF₃ as well as the ternary system NaF-KF-AlF₃ in the range up to 50 mol% AlF₃, were measured using the thermal analysis method. In the system KF-AlF₃ the coordinates of the eutectic points are: E ₁: 8.0 mol% AlF₃, 821.2°C, and E ₂: 45.5 mol% AlF₃, 565.0°C. In the investigated concentration range of the ternary system 2 eutectic points have been found with the calculated coordinates: E ₁: 36.3 mol% NaF, 62.7 mol% KF, 1.0 mol% AlF₃; t=711.2°C; and E ₂: 51.9 mol% NaF, 27.4 mol% KF, 20.7 mol% AlF₃; t=734.5°C. Other eutectic points lie most probably beyond the investigated part of the system. This revised version was published online in July 2006 with corrections to the Cover Date.     

New Ba5M5−xPtxClO13 (M=Fe, Co) oxychlorides with layered perovskite-related structure

Crystals of Ba₅Fe_5−xPt_xClO₁₃ and Ba₅Co_5−yPt_yClO₁₃ were prepared for x=1.31, 1.51, 1.57, 1.59 and y=0, 0.97 and 1.08 in a BaCl₂ flux and investigated by X-ray diffraction methods. These compounds adopt a 10H perovskite structure built from the stacking of BaO₃ and BaOCl layers in the sequence (BaO₃)₄(BaOCl) with space group P6₃/mmc. The cation sites within the trimeric unit of face-sharing octahedra are occupied by Co or Fe and Pt ions, while the tetrahedral sites formed between BaO₃ and BaOCl layers are only occupied by Fe or Co. Moreover, oxygen stoichiometry indicates an average oxidation state for Co and Fe higher than +III, indicating the stabilization of Co⁴⁺ and Fe⁴⁺.     

Structural and magnetic characterization of Mn3IrGe and Mn3Ir(Si1−xGex): experiments and theory

The structural and magnetic properties of a new ternary Ir-Mn-Ge phase, Mn₃IrGe, as well as the solid solution Mn₃Ir(Si_1−xGe_x), 0?x?1, have been investigated by means of X-ray and neutron powder diffraction, magnetization measurements and first principles calculations. The crystal structure is cubic, of the AlAu₄-type (an ordered form of the β-Mn structure), Z=4, space group P2₁3, and the unit-cell dimension varies linearly with the silicon content. For all compositions, antiferromagnetic ordering is found below a critical temperature of about 225 K. The magnetic structure is noncollinear, as a result of frustrated magnetic interactions on a triangular network of Mn atoms, on which the moments rotate 120° around the triangle axes. The magnitude of the magnetic moment at 10 K is 3.39(4) μ_B for Mn₃IrGe. The theoretical calculations reproduce with very good accuracy the magnitudes as well as the directions of the experimentally observed magnetic moments.     

4-[2-(4,6-二甲氧基-2-嘧啶氧基)苄胺基]苯甲酸正丙酯的合成和晶体结构

2-甲砜基-4,6二甲氧基嘧啶和N-(4-丙氧羰基苯基)-2-羟基苄胺在四氢呋喃溶液中反应, 生成标题化合物4-[2-(4,6-二甲氧基-2-嘧啶氧基)苄胺基]苯甲酸正丙酯,并测定了其晶体结构。该化合物分子式为C23H25N3O5,晶体属单斜晶系,空间群为P2/n,晶胞参数为a = 14.8504(8),b = 9.4420(4),c = 16.3129(9) 牛 = 104.881(1)埃琕 = 2210.6(2) 3,Z = 4,Dc = 1.272 g/cm3,F(000) = 896.00,(MoK? = 0.91 cm-1,R = 0.051,wR = 0.118,获得19761衍射数据,其中独立衍射点5004个。经元素分析、IR、MS和HNMR等对化合物的结构进行了表征。在分子结构中,各有3个不同的共轭平面。嘧啶环和苯环(C(7) C(12)),及苯环(C(14) C(19))的夹角分别为99.18 , 164.15埃?个苯环之间的夹角为94.93啊;衔锍世啻焦瓜蟆?     

Studies on the porous structure of di(methacryloyloxymethyl) naphthalene-divinylbenzene copolymers by inverse exclusion chromatography

Summary Using inverse exclusion chromatography the porous structure of the copolymers of di(methacryloyloxymethyl)naphthalenes and divinylbenzene was investigated.In order to determine the pore size distributions of the copolymers, toluene, alkylphenones, phthalates and polystyrene standards were used as the probes.The measurements proved that the existence of micropores depend on the method of copolymerization. The copolymers obtained by suspension and emulsion methods are more or less microporous, but the copolymer prepared by thermal polymerization in mass does not include micropores in its internal structure.