Optical Properties of Fullerenated Poly(epoxy propyl carbazole)

Sincethedevelopmentofmethodslformassproductionoffullerenes,therehasbeengTeatinterestinit-Manyresearchgroups'havepaidgreatattentiontothefiJllerene-dopedpolymersinceWang'discoveredinl992thatfullerene-dopedPVKhasanapparentlyincreasingphotoconductivity.WehavereportedthechendcalattachmentofCcocagestothecarbazolegroupsonpoly(epoxypropylcarbazole)(PEPC)chainsbyFriedel-Craftstypereaction'.Here,theopticalpropertiesoffullerenatedPEPCwereinvestigated,whichwillshowitsgoodphotoconductivepropeFtiesbe…     

Synthesis,characterization, and ethylene (Co)polymerization behavior of trichlorotitanium 2‐(1‐(arylimino)propyl)quinolin‐8‐olates

A series of trichlorotitanium complexes containing 2‐(1‐(arylimino)propyl)quinolin‐8‐olates was synthesized by stoichiometric reaction of titanium tetrachloride with the corresponding potassium 2‐(1‐(arylimino)propyl)quinolin‐8‐olates and was fully characterized by elemental analysis, nuclear magnetic resonance spectroscopy, and by single‐crystal X‐ray diffraction study of representative complexes. All titanium complexes, when activated with methylaluminoxane, exhibited high catalytic activity toward ethylene polymerization [up to 1.15 × 10⁶ g mol^?1(Ti) h^?1] and ethylene/α‐olefin copolymerization [up to 1.54 × 10⁶ g mol^?1 (Ti) h^?1]. The incorporation of comonomer was confirmed to amount up to 2.82 mol % of 1‐hexene or 1.94 mol % of 1‐octene, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reduction-responsive vesicles composed of dimethylaminopropyl octadecanamide and dithiodipropionic acid

Reduction-responsive vesicle was prepared by salt-bridging N-[3-(dimethylamino)propyl]-octadecanamide (DMAPODA, a cationic amphiphile) using 3,3′-dithiodipropionic acid (DTPA, a disulfide diacid compound). According to the transmission electron micrograph and the fluorescence quenching degree (53.2%), it could be said that vesicles were formed when the DMAPODA to DTPA molar ratio was 2:2. The DMAPODA/DTPA associate was considered to be a building block for vesicle formation because DTPA could electrostatically associate with DMAPODA and help the cationic amphiphile assemble into the vesicle. On a differential scanning calorimetric thermogram, the DMAPODA/DTPA vesicle showed two endothermic peaks at 50.6°C and 63.2°C. The peak found at the lower temperature was possibly due to the solid gel-to-liquid crystal phase transition of the vesicular membrane and the peak found at the higher temperature was considered to be due to the melting of DMAPODA, indicating that unassociated DMAPODA coexisted with DMAPODA/DTPA vesicles. The release of calcein enveloped in the vesicle was promoted by DL-dithiothreitol, possibly because DTPA can be broken by the reducing agent to form mercaptopropionic acids and the vesicle could be disintegrated and/or the vesicular membrane would become defective.     

TiO2／Al2O3负载量对气相酯交换合成碳酸甲丙酯的影响

采用XRD、N2 physical adsorption、XPS、NH3-TPD和吡啶吸附IR等技术,对碳酸二甲酯和丙醇气固相合成碳酸甲丙酯的TiO2/Al2O3催化剂进行了表征.实验结果表明,TiO2/Al2O3表面的Lewis酸中心是反应的催化活性位,酸性主要来源于Al2O3,TiO2起修饰作用,有利于选择性生成碳酸甲丙酯.随着Ti负载量的增加,TiO2在Al2O3表面由高度分散状态向晶态转变,其比表面积逐渐降低,但是TiO2/Al2O3的表面酸性质没有受到显著影响,L酸量先是增加,而后略有下降.当Ti负载量为5%时,DMC的转化率及MPC的选择性分别达到54.3%和88.1%.     

Excess thermodynamics properties of propyl propanoate+hexane+cyclohexane at 298.15 K

Summary In this paper we present excess molar volumes and excess molar enthalpies of binary and ternary mixtures containing propyl propanoate, hexane and cyclohexane as components at 298.15 K. Excess molar volumes were calculated from the density of the pure liquids and mixtures. The density was measured using an Anton Paar DMA 60/602 vibrating-tube densimeter. Excess molar enthalpies were obtained using a Calvet microcalorimeter     

Structural changes in β-lactoglobulin by conjugation with three different kinds of carboxymethyl cyclodextrins

β-Lactoglobulin-carboxymethyl cyclodextrin (β-LG-CMCyD) conjugates were prepared by using water soluble carbodiimide. Three kinds of CMCyDs differing in molecular mass were used to investigate the effects of different CMCyD contents, net charge and hydrophobicity on the structural changes in β-lactoglobulin. The effect of CMCyDs on the structure of β-lactoglobulin was utilized to investigate the contribution of hydrophobic interactions to the stability of the protein. Spectroscopic studies suggested that the conformation around had not changed in either conjugate but the α-helix content of β-LG-CMCyD conjugates had markedly increased as compared with that of β-lactoglobulin. The differential scanning calorimetry technique confirmed that the addition of one glucose unit in β-LG-CMCyD conjugates, enthalpy change of calorimetry decreased and the denaturation temperature of each conjugate was higher than that of native β-lactoglobulin. The heat contents agreed well with the conformational transition measured by molar ellipticity at 222 nm ([θ]₂₂₂) and Stoke's radius (R_S) values. Therefore, hydrophobic forces play an important role in stabilizing and shielding of the β-LG-CMCyD conjugates.     

Potential of prodendronic polyamines with modulated segmental charge density as novel coating for fast and efficient analysis of peptides and basic proteins by CE and CE‐MS

In this work, the suitability of a new polymer family has been investigated as capillary coatings for the analysis of peptides and basic proteins by CE. This polymer family has been designed to minimize or completely prevent protein–capillary wall interactions and to modify the EOF. These coating materials are linear polymeric chains bearing as side cationizable moiety a dentronic triamine derived from N,N,N’,N’‐tetraethyldiethylenetriamine (TEDETA), which is linked to the backbone through a spacer (unit labeled as TEDETAMA). Four different polymers have been prepared and evaluated: a homopolymer which comprised only of those cationizable repetitive units of TEDETAMA, and three copolymers that randomly incorporate TEDETAMA together with neutral hydrosoluble units of N‐(2‐hydroxypropyl) methacrylamide (HPMA) at different molar percentages (25:75, 50:50 and 75:25). It has been demonstrated that the composition of the copolymers influences the EOF and therefore the separation of the investigated biopolymers. Among the novel polymers studied, poly‐(TEDETAMA‐co‐HPMA) 50:50 copolymer was successfully applied as coating material of the inner capillary surface in CE‐UV and CE‐MS, providing EOF reversing together with fast and efficient baseline separation of peptides and basic proteins. Finally, the feasibility of the polymer‐coated capillary was shown through the analysis of lysozyme in a cheese sample.