Synthesis of Potential Antimicrobial Agents from Maltose. III. Introduction of an Amino Group Into the 3′-Position of 1,6-Anhydro-Disaccharides

Abstract

Regioselective cleavage of 1,6-anhydro-maltose (1) with periodate and the subsequent recyclization with nitromethane gave 1,6-anhydro-3′-deoxy-3′-nitro-disaccharides (3). Three diastereomers, prepared by benzylidenation of 3, were separated by column chromatography. Each of 4′,6′-O-benzylidene derivatives successively underwent debenzylidenation, reduction of the nitro group, and peracetylation to give 3′-acetamido-3′-deoxy-disaccharide derivatives (7, 8, and 9). The configurations of the 3-amino sugar moietres in 7 (D-gluco), 8 (D-manno) and 9 (D-galacto) were determined on the basis of the ¹H NMR data. The main product (7) was further modified to the 6-deoxy-6-nitro derivative.     

新型除草剂丙酯草醚A环14C均标记合成和鉴定

以U-¹⁴C-对氨基苯甲酸为前体, 通过酯化、缩合、还原和取代四步反应获得了A环¹⁴C均标记的丙酯草醚, 用PHPLC对其进行纯化. 采用HPLC-MS(ESI), MS(EI)和¹H NMR验证了其结构, 通过HPLC(外标法)确定其化学纯度大于98%; HPLC-LSC和TLC-IIA两种方法分析表明, 其放射化学纯度大于98%, 其比活度为1.089±0.011 mCi/mmol. 合成的化学收率和放化收率均为53%.     

用毛细管电泳-激光诱导荧光-增强型电荷耦合检测器测定痕量氨基酸

本文对用毛细管电泳－激光诱导荧光－增强型电荷耦合检测器测定氨基酸衍生物进行了研究。考察了荧光黄异疏氰酸酯衍生氨基酸的各种条件。在优化条件下，10－8～10－6mol／L浓度范围内精氨酸与其衍生物的荧光强度呈良好的线性关系，最小可衍生化的精氨酸浓度为5×10－10mol／L。     

甲基丙烯酸3-三甲氧基硅丙酯在乳液体系中的分配

通过气相色谱(GC)研究了甲基丙烯酸3_三甲氧基硅丙酯(MPS)在乳液体系各相中的分配行为,并测得了MPS在各种情况下的分配系数.发现当MPS加入量达到聚合物种子的约10 wt%时,体系进入饱和状态,且大部分MPS分配在粒子相中.通过对单体相分配行为的理论分析,并结合实验数据,发现种子乳胶粒粒径、聚合物种子中的化学组成对MPS的分配行为影响很小,而温度则使MPS在各相中的饱和浓度增加.     

Fast and sensitive high performance liquid chromatography analysis of cosmetic creams for hydroquinone, phenol and six preservatives

A fast and sensitive HPLC method for analysis of cosmetic creams for hydroquinone, phenol and six preservatives has been developed. The influence of sample preparation conditions and the composition of the mobile phase and elution mode were investigated to optimize the separation of the eight studied components. Final conditions were 60% methanol and 40% water (v/v) extraction of the cosmetic creams. A C18 column (100 mm × 2.1 mm) was used as the separation column and the mobile phase consisted of methanol and 0.05 mol/L ammonium formate in water (pH=3.0) with gradient elution. The results showed that complete separation of the eight studied components was achieved within 10 min, the linear ranges were 1.0-200 μg/mL for phenol, 0.1-150 μg/mL for sorbic acid, 2.0-200 μg/mL for benzoic acid, 0.5-200 μg/mL for hydroquinone, methyl paraben, ethyl paraben and propyl paraben, butyl paraben, and good linear correlation coefficient (≥0.9997) were obtained, the detection limit was in the range of 0.05-1.0 μg/mL, the average recovery was between 86.5% and 116.3%, and the relative standard deviation (RSD) was less than 5.0% (n=6). The method is easy, fast and sensitive, it can be employed to analyze component residues in cosmetic creams especially in a quality control setting.     

微流控芯片毛细管电泳激光诱导荧光检测法测定片剂中盐酸美西律的含量

建立了微流控芯片毛细管电泳激光诱导荧光检测法测定片剂中盐酸美西律含量的方法,对衍生条件和电泳条件进行了系统的考察。盐酸美西律经异硫氰酸荧光素(FITC)40℃衍生6h,以20 mmol/L硼砂为电泳缓冲溶液,进样30s后,分离电压2000V,可在1 min内完成一次检测。方法的检出限为0.022 mg/L、线性范围0.108～1.079 mg/L、相关系数0.994,加标回收率为99.7%～102.3%,方法适用于盐酸美西律的检测和质量控制。     

硫酸铵存在下碘化物-乙基紫-异丙醇体系萃取分离镉

研究了在硫酸铵存在下,碘化物-乙基紫-异丙醇体系萃取镉的行为以及异丙醇水溶液的分相条件。实验表明,异丙醇作为萃取溶剂,能萃取中性离子缔合物。溶液pH1-6时,该体系能使Cd^2 从常见过渡元素Fe^3 、Co^2 、Ni^2 、Mn^2 、ZN^2 的混合液中分离出来。     

Research Progress on Typical Quaternary Ammonium Salt Polymers

Quaternary ammonium salt polymers, a kind of polyelectrolyte with a quaternary ammonium group, are widely used in traditional and emerging industries due to their good water-solubility, adjustable cationicity and molecular weight, high efficiency and nontoxicity. In this paper, firstly, the properties and several synthesis methods of typical quaternary ammonium salt monomers were introduced. Secondly, the research progress on the synthesis of polymers was summarized from the perspective of obtaining products with high molecular weight, narrow molecular weight distribution and high monomer conversion, and special functional polymers. Thirdly, the relationships between the structures and properties of the polymer were analyzed from the perspectives of molecular weight, charge density, structural stability, and microstructural regulation of the polymer chain unit. Fourthly, typical examples of quaternary ammonium salt polymers in the application fields of water treatment, daily chemicals, petroleum exploitation, papermaking, and textile printing and dyeing were listed. Finally, constructive suggestions were put forward on developing quaternary ammonium salt polymers with high molecular weights, strengthening the research on the relationships between the structures and their properties and pinpointing relevant application fields.     

Structural analysis of tris(tetra-n-butylammonium) hexakisisothiocyanatoyttrate(III)

The structural analysis of [(n-C₄H₉)₄N]₃[Y(NCS)₆] (I) using single-crystal diffraction data and full-matrix least squares refinement has been carried out. The hexaisothiocyanate complex crystallizes in the centrosymmetric triclinic space group P (No. 2) with unit cell constants of a = 12.431(1), b = 12.866(1), c = 22.750(2) Å, = 90.78(1), = 92.05(1), = 96.67(1)°, and Z = 2. The molecular unit consists of three separate cationic tetra-n-butylammonium groups and an independent hexakisisothiocyanatoyttrate anionic group in which the six thiocyanate ligands are octahedrally coordinated through the N atom to the Y central ion. Selected bond distances and angles are presented as well as the synthesis and peripheral studies of (I).