Potential of prodendronic polyamines with modulated segmental charge density as novel coating for fast and efficient analysis of peptides and basic proteins by CE and CE‐MS

In this work, the suitability of a new polymer family has been investigated as capillary coatings for the analysis of peptides and basic proteins by CE. This polymer family has been designed to minimize or completely prevent protein–capillary wall interactions and to modify the EOF. These coating materials are linear polymeric chains bearing as side cationizable moiety a dentronic triamine derived from N,N,N’,N’‐tetraethyldiethylenetriamine (TEDETA), which is linked to the backbone through a spacer (unit labeled as TEDETAMA). Four different polymers have been prepared and evaluated: a homopolymer which comprised only of those cationizable repetitive units of TEDETAMA, and three copolymers that randomly incorporate TEDETAMA together with neutral hydrosoluble units of N‐(2‐hydroxypropyl) methacrylamide (HPMA) at different molar percentages (25:75, 50:50 and 75:25). It has been demonstrated that the composition of the copolymers influences the EOF and therefore the separation of the investigated biopolymers. Among the novel polymers studied, poly‐(TEDETAMA‐co‐HPMA) 50:50 copolymer was successfully applied as coating material of the inner capillary surface in CE‐UV and CE‐MS, providing EOF reversing together with fast and efficient baseline separation of peptides and basic proteins. Finally, the feasibility of the polymer‐coated capillary was shown through the analysis of lysozyme in a cheese sample.     

Complete dispersion analysis of single crystal neodymium gallate

A single crystal of neodymium gallate was investigated by FTIR-spectroscopy in the reststrahlen region between 100–1000 cm⁻¹. The three spectra of the crystal in principal orientations were analyzed by dispersion analysis and the dispersion parameters and the dielectric tensor function were obtained. This allows to properly characterize and quantitatively analyze films of this important substrate material by IR-optical methods.     

1,3-双[3-(1-甲氧基-2-羟基丙氧基)丙基]封端聚硅氧烷的合成

以1,3-双[3-(1-甲氧基-2-羟基丙氧基)丙基]四甲基二硅氧烷和八甲基环四硅氧烷(D4)为原料,通过阳离子催化开环聚合制备了1,3-双(3-(1-甲氧基-2-羟基丙氧基)丙基)封端聚硅氧烷,研究了反应温度,反应时间,催化剂种类及加入量对于聚合反应的影响,结果表明,最佳反应条件为:反应温度65℃,反应时间24h,浓硫酸作为催化剂加入量为反应物质量的0.3%,此时反应拥有最高的转化率。通过红外光谱与核磁共振光谱对产物进行了表征。     

Analysis of the nitrile and methyl torsional vibrations of n‐propyl cyanide in its S0 electronic state

This work presents a structural and vibrational theoretical study of n‐propyl cyanide as a function of the nitrile and methyl torsional modes. A potential energy hypersurface is built at the MP4(SDQ)/aug‐cc‐pVTZ//MP2/aug‐cc‐pVTZ theory level. The equilibrium structure is found in a gauche conformation. Another minimum is found for the trans form. The maximum appears in a cis conformation. For the first time, the interconversion barriers between the different forms are calculated. A two‐dimensional anharmonic vibrational Hamiltonian is built for the nitrile and methyl torsional modes. We find the vibrational energy levels to organize in two stacks associated to the gauche and trans forms. Fundamental frequencies of 113.12 and 220.54 cm^?1 are predicted for the nitrile and methyl torsions in the equilibrium, gauche, conformer. In addition, we find symmetry allowed transitions between the gauche and trans energy levels stacks. The lowest transition is predicted to appear at 24.49 cm^?1. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Oxygen ion conductivity of Lao.sSro.2Gao.s3Mgo.17-xCoxO3-δ synthesized by laser rapid solidification

Materials Lao.8Sro.2Gao.83Mgo.17_xCox03_6 with x = 0, 0.05, 0.085, 0.10, and 0.15 are synthesized by laser rapid solidification. It is shown that the samples prepared by laser rapid solidification give rise to unique spear-like or leaf-like microstructures which are orderly arranged and densely packed. Their electrical properties each show a general depen dence of the Co content and the total conductivities of Lao.8Sro.2Gao.83Mgo.085Coo.08503_6 prepared by laser rapid solidification are measured to be 0.067, 0.124, and 0.202 S.cm-1 at 600, 700, and 800 ℃, respectively, which are much higher than by conventional solid state reactions. Moreover, the electrical conductivities each as a function of the oxy gen partial pressure are also measured. It is shown that the samples with the Co content values 〈 8.5 mol% each exhibit basically ionic conduction while those for Co content values 〉 10 mol % each show ionic mixed electronic conduction under oxygen partial pressures from 10-16 atm （1 atm = 1.01325 x 105 Pa） to 0.98 atm. The improved ionic conductivity of Lao.sSro.2Gao.83Mgo.085Coo.08503 prepared by laser rapid solidification compared with by solid state reactions is attributed to the unique microstructure of the sample generated during laser rapid solidification.     

Biochemical and computational insights of adenosine deaminase inhibition by Epigallocatechin gallate

Epigallocatechin gallate, a flavonoid from Camellia sinensis possess various pharmacological activities such as anticancer, antimicrobial and antioxidant etc. Adenosine deaminase, (ADA), is a key enzyme involved in the purine metabolism, the inhibitors of which is being considered as highly promising candidate for the development of anti-proliferative and anti-inflammatory drugs. In this work we studied adenosine deaminase inhibitory activity of epigallocatechin gallate by using biophysical and computational methods. The enzyme inhibition study result indicated that epigallocatechin gallate possess strong inhibitory activity on ADA. ITC study revealed the energetics of binding. Also the binding is confirmed by using fluorescence spectroscopy. The structural details of binding are obtained from molecular docking and MD simulation studies.     

Preparation and characterizations of inherent flame retarded polyamide 66 containing the phosphorus linking pendent group

Polyamide 66 (PA66) containing the phosphorus linking pendent group with inherent flame retardancy property was prepared by condensation polymerization of hexamethylene diammonium adipate (AH salt) and 9,10‐dihydro‐10‐[2,3‐di(hydroxycarbonyl)propyl]‐10‐phosphaphenanthrene‐10‐oxide (DDP) as a co‐monomer. Prior to condensation polymerization, DDP was reacted with hexamethylene diamine (HMDA), which made DDP easier to react with AH salt. Then, the DDP‐HMDA was introduced into AH salt solution to prepare inherent flame retarded PA66 (FRPA66). Fourier transform infrared spectra, nuclear magnetic resonance spectra, gel permeation chromatography, differential scanning calorimetry, thermogravimetric analysis, tensile test, vertical burning test, limiting oxygen index test, cone calorimetry, and scanning electron microscopy were utilized to investigate the properties of FRPA66. Experimental results indicated that the bulky pendent phosphorus group tended to destroy the structure regularity of FRPA66 and the molecular weight, crystallinity, and thermal stability reduced. The tensile strength of FRPA66 containing 5 wt% of DDP was 58.44 MPa, and it can achieve a V‐0 rating according to the vertical burning test with the limiting oxygen index value of 33.2%. This indicated that the inherent flame retarded PA66 expanded the application of PA66 materials.     

Synthesis and characterization of α-{ 3-[2-hydroxy-3- （N-methyl-N-hydroxy-ethylamino）propoxy]propyl}-ω- butylpolydimethylsiloxanes

α-{ 3-[2-hydroxy-3-（N-methyl-N-hydroxyethylamino）propoxy]propyl }-α-butylpolydimethylsiloxanes III with various molecu- lar weights were prepared by epoxy addition of α-[3-（2,3-epoxy-propoxy）propyl]-α-butylpolydimethylsiloxanes Ⅱ and N- methylmonoethanolamine. At each step, the outcome compounds were characterized through FT-IR and NMR spectra, the results showed that each step was successfully carried out and objective products were achieved.