Optical Properties of Fullerenated Poly(epoxy propyl carbazole)

Sincethedevelopmentofmethodslformassproductionoffullerenes,therehasbeengTeatinterestinit-Manyresearchgroups'havepaidgreatattentiontothefiJllerene-dopedpolymersinceWang'discoveredinl992thatfullerene-dopedPVKhasanapparentlyincreasingphotoconductivity.WehavereportedthechendcalattachmentofCcocagestothecarbazolegroupsonpoly(epoxypropylcarbazole)(PEPC)chainsbyFriedel-Craftstypereaction'.Here,theopticalpropertiesoffullerenatedPEPCwereinvestigated,whichwillshowitsgoodphotoconductivepropeFtiesbe…     

Potential of prodendronic polyamines with modulated segmental charge density as novel coating for fast and efficient analysis of peptides and basic proteins by CE and CE‐MS

In this work, the suitability of a new polymer family has been investigated as capillary coatings for the analysis of peptides and basic proteins by CE. This polymer family has been designed to minimize or completely prevent protein–capillary wall interactions and to modify the EOF. These coating materials are linear polymeric chains bearing as side cationizable moiety a dentronic triamine derived from N,N,N’,N’‐tetraethyldiethylenetriamine (TEDETA), which is linked to the backbone through a spacer (unit labeled as TEDETAMA). Four different polymers have been prepared and evaluated: a homopolymer which comprised only of those cationizable repetitive units of TEDETAMA, and three copolymers that randomly incorporate TEDETAMA together with neutral hydrosoluble units of N‐(2‐hydroxypropyl) methacrylamide (HPMA) at different molar percentages (25:75, 50:50 and 75:25). It has been demonstrated that the composition of the copolymers influences the EOF and therefore the separation of the investigated biopolymers. Among the novel polymers studied, poly‐(TEDETAMA‐co‐HPMA) 50:50 copolymer was successfully applied as coating material of the inner capillary surface in CE‐UV and CE‐MS, providing EOF reversing together with fast and efficient baseline separation of peptides and basic proteins. Finally, the feasibility of the polymer‐coated capillary was shown through the analysis of lysozyme in a cheese sample.     

新型除草剂丙酯草醚A环14C均标记合成和鉴定

以U-¹⁴C-对氨基苯甲酸为前体, 通过酯化、缩合、还原和取代四步反应获得了A环¹⁴C均标记的丙酯草醚, 用PHPLC对其进行纯化. 采用HPLC-MS(ESI), MS(EI)和¹H NMR验证了其结构, 通过HPLC(外标法)确定其化学纯度大于98%; HPLC-LSC和TLC-IIA两种方法分析表明, 其放射化学纯度大于98%, 其比活度为1.089±0.011 mCi/mmol. 合成的化学收率和放化收率均为53%.     

活性炭固载磷钨酸催化合成丙酸丙酯

用活性碳固载磷钨酸催化剂合成了丙酸丙酯,考察了磷钨酸固载量、催化剂用量、醇酸摩尔比、反应温度、反应时间、带水剂用量对酯化反应的影响。在优化条件(催化固载量30．0％、催化剂用量2．5g/0．2mol丙酸、醇酸摩尔比1．2：1、反应温度110--116℃、反应时问2．51h、带水剂环己烷用量10mL下反应,丙酸丙酯收率为95．8％,催化剂可重复使用。     

Fast and sensitive high performance liquid chromatography analysis of cosmetic creams for hydroquinone, phenol and six preservatives

A fast and sensitive HPLC method for analysis of cosmetic creams for hydroquinone, phenol and six preservatives has been developed. The influence of sample preparation conditions and the composition of the mobile phase and elution mode were investigated to optimize the separation of the eight studied components. Final conditions were 60% methanol and 40% water (v/v) extraction of the cosmetic creams. A C18 column (100 mm × 2.1 mm) was used as the separation column and the mobile phase consisted of methanol and 0.05 mol/L ammonium formate in water (pH=3.0) with gradient elution. The results showed that complete separation of the eight studied components was achieved within 10 min, the linear ranges were 1.0-200 μg/mL for phenol, 0.1-150 μg/mL for sorbic acid, 2.0-200 μg/mL for benzoic acid, 0.5-200 μg/mL for hydroquinone, methyl paraben, ethyl paraben and propyl paraben, butyl paraben, and good linear correlation coefficient (≥0.9997) were obtained, the detection limit was in the range of 0.05-1.0 μg/mL, the average recovery was between 86.5% and 116.3%, and the relative standard deviation (RSD) was less than 5.0% (n=6). The method is easy, fast and sensitive, it can be employed to analyze component residues in cosmetic creams especially in a quality control setting.     

Synthesis and Characterization of Chitosan‐graft‐Poly(3‐(trimethoxysilyl)propyl methacrylate) Initiated by Ceric (IV) Ion

The grafting of 3‐(trimethoxysilyl)propyl methacrylate (TMSPM) onto chitosan by ceric ion initiation was studied under homogeneous conditions in 2% acetic acid solution. The grafted polymer was characterized by FT‐IR, ¹H‐NMR, TGA and XRD and swelling studies. TGA results showed that the incorporation of TMSPM to the chitosan chains decreased the thermal stability of the grafted chitosan. Due to the grafting of TMSPM, the crystallinity of chitosan derivatives was found to be destroyed. The solubility of the grafted chitosan in water was improved. The effects of reaction conditions such as initiator concentration, monomer concentration, reaction temperature and reaction time were studied by determining the grafting parameters such as grafting and grafting efficiency. Under optimum conditions, the grafting parameters were achieved as 1440 and 97%, respectively.     

Phase behavior and solution properties of sodium (3-dodecanoyloxy-2-hydroxy-propyl) succinate in water

Sodium (3-dodecanoyloxy-2-hydroxy-propyl) succinate (SLGMS) is a conjugated anionic surfactant in which a glycerol residue connects with a hydrophilic sodium succinate and dodecanoate. Aqueous micellar phase (W_m), hexagonal (H₁), bicontinuous cubic (V₁), and lamellar (L_α) phases are successively formed with increasing the surfactant concentration in a binary SLGMS-water system. The Krafft point is below 0 °C. The effective cross sectional area per surfactant molecule, a _s, in the H₁ phase is almost constant, 0.5 nm², and the shape of cylindrical micelle is almost unchanged with surfactant concentration. The cmc value of SLGMS measured by means of surface tension, electrical conductivity, and fluorescence probe methods is in the range of 4∼9 × 10⁻⁵ mol/l that is much lower than that of sodium dodecanoate, 2 × 10⁻² mol/l, or SDS, 8 × 10⁻³ mol/l. Hence, it is considered that the polar glycerol part in the SLGMS acts as a hydrophobic part. The solubilization of oil in the SLGMS solution is much higher than that in the SDS solution and this also suggests that the glycerol and succinic units act as lipophilic moieties. Received: 15 June 2000/Accepted: 27 July 2000     

硫酸铵存在下碘化物-乙基紫-异丙醇体系萃取分离镉

研究了在硫酸铵存在下,碘化物-乙基紫-异丙醇体系萃取镉的行为以及异丙醇水溶液的分相条件。实验表明,异丙醇作为萃取溶剂,能萃取中性离子缔合物。溶液pH1-6时,该体系能使Cd^2 从常见过渡元素Fe^3 、Co^2 、Ni^2 、Mn^2 、ZN^2 的混合液中分离出来。     

Synthesis,characterization, and ethylene (Co)polymerization behavior of trichlorotitanium 2‐(1‐(arylimino)propyl)quinolin‐8‐olates

A series of trichlorotitanium complexes containing 2‐(1‐(arylimino)propyl)quinolin‐8‐olates was synthesized by stoichiometric reaction of titanium tetrachloride with the corresponding potassium 2‐(1‐(arylimino)propyl)quinolin‐8‐olates and was fully characterized by elemental analysis, nuclear magnetic resonance spectroscopy, and by single‐crystal X‐ray diffraction study of representative complexes. All titanium complexes, when activated with methylaluminoxane, exhibited high catalytic activity toward ethylene polymerization [up to 1.15 × 10⁶ g mol^?1(Ti) h^?1] and ethylene/α‐olefin copolymerization [up to 1.54 × 10⁶ g mol^?1 (Ti) h^?1]. The incorporation of comonomer was confirmed to amount up to 2.82 mol % of 1‐hexene or 1.94 mol % of 1‐octene, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011