端部周期加热下管内气温奇异分布的实验研究

设计搭建了端部周期加热时管内气体热声对流的实验平台,对端部周期加热引起的气体热声对流作用下管内气体的温度分布进行了实验研究。该实验以氩气为工质,利用三极管控制加热电路实现周期性加热;测量了不同加热频率下管内的气体温度,并与常热流加热时的温度分布进行对比,结果表明端部周期加热时管内气体的温度分布与同功率下常热流加热时存在明显的差异,并且在某些测点出现了温度的奇异分布。本实验验证了超温现象的存在,为管内气体热声对流现象的进一步研究奠定了基础。     

基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定

 首次报道了一种新型的基于铰链式六面顶压机的二级6-8模大腔体静高压装置的内置加热元件的设计与温度标定。此加热组装结构简单,升温快,保温效果好,并有效地解决了国外基于两面顶压机构架下的二级6-8模内加热组装中热电偶在施加压力时易断的问题。以低成本的碳管为加热元件,采用直接和间接两种加热方式,用双铂铑（Pt6%Rh-Pt30%Rt）B型热电偶进行温度测量,并根据实验过程中加热功率与腔内实际温度的关系,对不同压力下腔体内的温度进行了标定。实验结果表明：此加热系统的油压达到40 MPa（腔体压力约10 GPa）时,温度可以达到1 700 ℃以上;在油压为30 MPa、样品室温度为1 000 ℃时,保温时间可达2 h,甚至更长;实验中获得样品的直径可达3 mm,高度可达7 mm,实现了在高温超高压条件下大样品的制备,满足了实验对产生高温超高压条件的需要。     

辐射在CH泡沫中传输的数值模拟

利用一维多群辐射输运程序对辐射在CH泡沫中的传输过程进行了数值模拟,给出一些细致的物理图像和定量结果。在一定的入射辐射流条件下,密度变化对辐射传输特征、辐射加热介质的热力学平衡弛豫过程有重要影响。随着密度下降,辐射由亚声速传输转变为超声速传输,辐射在传输过程中的能谱形状也不同。     

High-speed deposition of RE123 film with large current capacity by hot-wall type PLD system

We have studied a hot-wall heating system to produce GdBa₂Cu₃O_y (GdBCO) films with large critical currents (I_c) at a high production rate by a pulsed-laser-deposition (PLD) method. GdBCO films fabricated at a production rate of 30 m/h under the optimized conditions, especially a distance of 95 mm between the target and the substrate (T–S), exhibited high critical current densities (J_c) of about 3 MA/cm² and I_c over 300 A at a thickness of 1–2 μm. Furthermore, long GdBCO tapes prepared by repeated depositions at each tape-passing speed of 80 m/h showed uniform I_c distribution along the longitudinal direction, because the hot-wall system enabled to stabilize temperature within a few degrees at 800 °C. A 170 m long tape with I_c over 600 A was successfully fabricated at a production rate of 16 m/h using a laser power of 360 W.     

Multicomponent Domino [4+1+1] Carbocyclization Providing an Efficient and Regioselective Strategy to Fluoren-9-ones

Concise and efficient three‐component domino [4+1+1] carbocyclization to highly substituted fluoren‐9‐one derivatives promoted by K₂CO₃ has been developed under microwave irradiation conditions. The direct bis‐cyanation and aryl amination residing in fluoren‐9‐one framework were achieved in a one‐pot operation. The reaction proceeds at fast rates and can be finished within 30 min, which makes workup convenient to give good to excellent chemical yields.     

Solvent-Free C-Benzoylation and N-Benzoylation Reactions Using Microwave Heating

An ecofriendly and efficient microwave-irradiated solvent-free benzoylation method was developed. The procedure for C-benzoylation used 50 mol% AlCl₃ as a Lewis acid catalyst at 130 °C and was completed in 10 min. The isolated yield was between 71% and 100%. N-benzoylation was conducted in a catalyst-free environment at 130 °C in 10 min. The isolated yield was between 80% and 100%.

Synthesis of Metal‐Free Phthalocyanines in Functionalized Ammonium Ionic Liquids

A convenient, fast, efficient, and ecofriendly synthesis of metal‐free phthalocyanines from various substituted phthalonitriles in different hydroxyalkylammonium ionic liquids in the presence of 1,8‐diazabicyclo‐[5,4,0]‐undec‐7‐ene (DBU) is reported in moderate yields. The effect of concentration of DBU and temperature on the synthesis of phthalocyanine in N‐(2‐hydroxyethyl)‐N,N‐dimethylbutylammonium bromide ionic liquid has been examined, and the ionic liquid has been recovered and reused conveniently.     

Microwave‐Assisted Synthesis and Characterization of CuO Nanocrystals

CuO feather‐like and flower‐like crystals have been synthesized by a fast microwave‐assisted solution approach using Cu(NO₃)₂ and NaOH. The morphology transformation of CuO could be achieved by ionic liquid 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate ([BMIM]BF₄). With [BMIM]BF₄, flower‐like CuO were obtained, whereas without [BMIM]BF₄, feather‐like CuO were obtained. The possible formation mechanism of flower‐like CuO was discussed on the basis of experimental results. The products were characterized by XRD, FESEM/EDS, and TEM/SAED. In addition, the adsorption of [BMIM]BF₄ on flower‐like CuO was confirmed by FTIR and TG/DSC, and the band gap energies of the flower‐like CuO was estimated by UV‐vis spectra.     

New formal (3+3) cycloaddition of enaminones for forming tetracyclic indolo[2,3-b]quinolines under microwave irradiation

Concise and efficient base-promoted domino formal (3+3) cycloaddition has been established for the formation of tetracyclic indolo[2,3-b]quinoline derivatives under microwave heating. The present methodology shows attractive properties, such as the maximum efficiency of a process, short reaction periods, and operational simplicity, and it can avoid time-consuming and costly syntheses, tedious work-up and isolation of intermediate. This chemistry provides a facile and promising synthetic strategy to construction of tetracyclic indolo[2,3-b]quinoline skeleton.     

Experimental Investigation on the Mass Diffusion Behaviors of Calcium Oxide and Carbon in the Solid-State Synthesis of Calcium Carbide by Microwave Heating

Microwave (MW) heating was proven to efficiently solid-synthesize calcium carbide at 1750 °C, which was about 400 °C lower than electric heating. This study focused on the investigation of the diffusion behaviors of graphite and calcium oxide during the solid-state synthesis of calcium carbide by microwave heating and compared them with these heated by the conventional method. The phase compositions and morphologies of CaO and C pellets before and after heating were carefully characterized by inductively coupled plasma spectrograph (ICP), thermo gravimetric (TG) analyses, X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The experimental results showed that in both thermal fields, Ca and C inter-diffused at a lower temperature, but at a higher temperature, the formed calcium carbide crystals would have a negative effect on Ca diffusion to carbon. The significant enhancement of MW heating on carbon diffusion, thus on the more efficient synthesis of calcium carbide, manifested that MW heating would be a promising way for calcium carbide production, and that a sufficient enough carbon material, instead of CaO, was beneficial for calcium carbide formation in MW reactors.