低温地板辐射采暖系统的传热分析与仿真

建立了低温地板辐射供暖系统的传热过程的数学模型,用有限元法对数学模型进行求解。以一个动态仿真程序得出了不同供回水平均温度和排管间距下的地板表面最高温度和单位面积的热流量,阐明了系统的舒适和节能特性,为工程设计提供了理论依据。     

Vibration and dissipative heating of a layered rectangular viscoelastic prism under harmonic shear loading

The vibration and vibrational heating of a rectangular prism with copper and polyethylene layers is studied by solving numerically a coupled problem of thermoelasticity. The cases of kinematic and mechanical harmonic shear loads on a section of the prism surface are examined. Local heating regions are revealed. They are due to the stress fields in the neighborhood of the points at which the type of boundary conditions changes. The temperature–time curves have preresonance, resonant, and postresonance sections. The heating process reaches a steady thermal state under kinematic loading and may become avalanche-like (which is typical of thermal instability) under mechanical loading Translated from Prikladnaya Mekhanika, Vol. 45, No. 2, pp. 70–78, February 2009.     

Ultrafast dynamics control on ablation of Cu using shaped femtosecond pulse trains

The ablation processes of Cu film are investigated using temporal shaped femtosecond pulse trains. The depth is modulated by changing the number and interval of the sub-pulses. The underlying ultrafast dynamic processes are discussed based on plasma shielding and electron multiple heating mechanisms. When the sub-pulse interval is less than 0.4 ps electron multiple heating is the dominant mechanism, while the plasma shielding dominates the subsequent ablation processes when the sub-pulse interval is larger than 0.4 ps. The curve of depth obtained by three pulse trains shows more significant oscillation as the function of sub-pulse interval under the low-fluence. We propose that the oscillation of depth is due to the coherent phonon oscillation excited by the pulse train. The study provides a basis for giving insight into the ultrafast dynamics for improving micromachining and nano-fabrications using shaped femtosecond pulse trains.     

Analysis of ultrasound-assisted convective heating/cooling process: Development and application of a Nusselt equation

In this study, the convective heating/cooling process assisted by US irradiation is analyzed with the aims of developing a new convective heat transfer correlation. Heat transfer experiments were conducted with different copper machined geometries (cube, sphere and cylinder), fluid velocities (0.93–5.00 × 10⁻³ m/s), temperatures (5–60 °C), and US intensities (0–6913 W/m²) using water as heat transfer fluid. The Nusselt (Nu) equation was obtained by assuming an apparent Nu number in the US-assisted process, expressed as the sum of contributions of the forced convection and cavitation-acoustic streaming effects. The Nu equation was validated with two sets of experiments conducted with a mixture of ethylene glycol and water (1:1 V/V) or a CaCl₂ aqueous solution (30 g/L) as immersion media, achieving a satisfactory reproduction of experimental data, with mean relative deviations of 17.6 and 17.8%, respectively. In addition, a conduction model with source term and the proposed correlation were applied to the analysis of US-accelerated heating kinetics of dry-cured ham reported in literature. Results demonstrated that US improves heating of ham slices because of the increased heat transfer coefficients and the direct absorption of US power by the foodstuff.     

超临界CO2布雷登循环热电联供系统多目标优化

本文研究了以超临界CO₂布雷登循环为原动机的热电联供系统,对系统主要运行参数进行了分析,得到运行参数对于系统热力学性能和经济性能的影响规律。同时,以一次能源利用率和单位输出成本作为目标函数,采用多目标遗传算法对系统进行了优化;在优化结果的基础上,通过TOPSIS法决策出最优解,并与单目标最优解进行对比。结果表明,透平进口温度、透平进口压力和压缩机进口温度的增大有利于系统效率的提高;作为代价,成本也相应增加。在热电比0~4范围内,尽可能增大热电比能够最大程度上降低系统的单位输出成本,提高能源的利用率。     

Dissipative Heating of a Viscoelastic Cylinder under a Load Steadily Moving over Its Surface

The Fourier method is used to find the analytical solutions to two-dimensional quasistatic problems of stationary polyharmonic vibrations and dissipative heating of a linearly viscoelastic cylinder. The influence of the cylinder thickness and the width of the loading area on the thermomechanical state of the cylinder is studied based on numerical data__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 2, pp. 23–32, February 2005.     

微波加热制备空心和锯齿形貌Bi_2Te_3晶体(英文)

Well-crystallized Bi₂Te₃ hollow spheres and nanosaws were prepared by microwave heating. Both the ionic liquid and the microwave heating play important role in the formation of the above nanostructures. Hollow spheres can not be obtained only by electronic stove heating, while the addition of ionic liquid leads to fast preparation of nanosaws structure under microwave heating conditions. The similar experimental results have been observed in the preparation of Bi₂S₃, Sb₂S₃ and Bi₂Se₃ nanostructures.     

微波加热合成多孔花状结构的纳米α-Bi_2O_3

<正>金属氧化物如氧化钛、氧化锌、氧化铜、氧化铁和氧化铋等是一类重要的半导体材料,它们在磁存储介质、太阳能转换、电子器件和催化等领域里有着广泛的应用,因此其纳米粉体的制备及性能研究吸引了众多的科学工作者。     

红外吸收法测定碳化铪粉末中的氧含量

应用氧氮分析仪建立碳化铪粉末中氧的测定方法。针对碳化铪熔点极高的特性,对加热功率、称样量和空白值等测定条件进行探讨,选择适合的助熔剂和高温石墨坩埚,确定了最佳测试条件。将该方法用于实际样品测定,测定结果的相对标准偏差小于2.0%(n=9),样品的加标回收率为98.1%～102.6%。     

Influence of the anode material on the characteristics of an analytical glow discharge cell

The energy transfer to the discharge gas due to various collision processes in the plasma and the heating of the sample are widely known effects in glow discharge (GD) spectroscopy. Despite of the considerable thermal effects and their serious influence on the performance of GD devices, measurements of the discharge gas and sample temperatures are not common at all. The gas temperature depends on the power absorption of the discharge as well as on the temperature of boundaries (sample and anode). In this work the influence of different anode materials in a Grimm-type source on the voltage–current characteristics, crater shapes and GD spectra is investigated. Anodes made of titanium and copper alloys, graphite, and steel with thermal conductivities covering a wide range of values are used. For a fixed voltage and pressure a decrease of the measured current is observed for bad thermal conductive anodes. Cooling of the sample results in an increase of the measured current. Both observations can be explained by changes of the discharge gas temperature. The temperature of the sample is measured from the back side and compared for different anodes. Further, it is found that the choice of the anode material (i) has no significant influence on the crater shape, (ii) results in slightly different sputtering rates and (iii) strong differences of the GD spectra.