Influence of Pretreatment Conditions on Methane Aromatization Performance of Mo／HZSM—5 and Mo—Cu／HZSM—5 Catalysts

Mo/HZSM-5 is a good catalyst for methane aromatization, and the reaction performance of Mo/HZSM-5 and Cu modified Mo/HZSM-5 catalysts under various pretreatment conditions has been studied. The results indicate that the catalyst presented a distinguished catalytic activity, benzene selectivity and a high stability when the bed temperature was raised in N2 atmosphere.     

Strategies to enhance the enzymatic hydrolysis of pretreated softwood with high residual lignin content

Pretreatment of Douglas-fir by steam explosion produces a substrate containing approx 43% lignin. Two strategies were investigated for reducing the effect of this residual lignin on enzymatic hydrolysis of cellulose: mild alkali extraction and protein addition. Extraction with cold 1% NaOH reduced the lignin content by only approx 7%, but cellulose to glucose conversion was enhanced by about 30%. Before alkali extraction, addition of exogenous protein resulted in a significant improvement in cellulose hydrolysis, but this protein effect was substantially diminished after alkali treatment. Lignin appears to reduce cellulose hydrolysis by two distinct mechanisms: by forming a physical barrier that prevents enzyme access and by non-productively binding cellulolytic enzymes. Cold alkali appears to selectively remove a fraction of lignin from steam-exploded Douglas-fir with high affinity for protein. Corresponding data for mixed softwood pretreated by organosolv extraction indicates that the relative importance of the two mechanisms by which residual lignin affects hydrolysis is different according to the pre- and post-treatment method used.     

Ethanol production from steam-explosion pretreated wheat straw

Bioconversion of cereal straw to bioethanol is becoming an attractive alternative to conventional fuel ethanol production from grains. In this work, the best operational conditions for steam-explosion pretreatment of wheat straw for ethanol production by a simultaneous saccharification and fermentation process were studied, using diluted acid [H₂SO₄ 0.9% (w/w)] and water as preimpregnation agents. Acid-or water-impregnated biomass was steam-exploded at different temperatures (160–200°C) and residence times (5, 10, and 20 min). Composition of solid and filtrate obtained after pretreatment, enzymatic digestibility and ethanol production of pretreated wheat straw at different experimental conditions was analyzed. The best pretreatment conditions to obtain high conversion yield to ethanol (approx 80% of theoretical) of cellulose-rich residue after steam-explosion were 190°C and 10 min or 200°C and 5 min, in acid-impregnated straw. However, 180°C for 10 min in acid-impregnated biomass provided the highest ethanol yield referred to raw material (140 L/t wheat straw), and sugars recovery yield in the filtrate (300 g/kg wheat straw).     

微视频技术在基础化学实验教学中的实践应用

以高校基础化学实验"从海带中提取碘""三草酸合铁（Ⅲ）酸钾的制备"为例，分别探讨了微视频技术在化学基本操作实验和综合设计型实验中的具体应用；此外，举例说明利用Flash软件制作的虚拟微视频可以在仪器分析实验中清晰地再现仪器真实操作中的每一个步骤，弥补了学生在实验前无法实际操作仪器的不足。实践证明，微视频技术的应用，丰富了基础化学实验教学模式，增强了学生自主学习的能力和动手能力，提高了实验成功率和实验教学效果。     

烟碱分子烙印聚合物的吸附特性

利用分子烙印技术，以烟碱为烙印分子，甲基丙烯酸(MAA)为功能单体，乙二醇二甲基丙烯酸酯(EDMA)为交联剂，合成了对烟碱具有特异性作用的分子烙印聚合物P(Nic)；通过平衡吸附实验，评价了其对烟碱的亲和力和选择性。与非烙印聚合物相比，P(Nic)对烟碱表现了很高的亲和力；Scatchard分析表明在P(Nic)中存在对烟碱有不同的亲和力的两类作用位点。通过与氨基吡啶类物质在P(Nic)上的吸附行为比较，表明P(Nic)对烟碱具有很好的选择性。本工作证明了用P(Nic)作为固相萃取(SPE)材料选择性地从烟草烟雾中提取烟碱的可能性。     

Decomposition of Toluene and Acetone in Packed Dielectric Barrier Discharge Reactors

The influences of TiO₂ catalytic material and glass pellet packing on the decomposition efficiency of toluene and acetone in air by dielectric barrier discharge (DBD) reactors were experimentally investigated in this study. The effects of both packing materials on the formation of byproducts such as CO and CO₂ were also evaluated. Experimental results indicate that the introduction of glass materials into the plasma zone of a wire-tube reactor would improve the decomposition efficiency of toluene and acetone compared to a nonpacked reactor. The apparent decomposition rate constant of a glass packed-bed reactor was 4.5–4.8 times greater than that of a nonpacked reactor. The results also indicate that the decomposition rate constant of toluene was approximately 2.6 times higher than that of acetone no matter which type reactor was utilized. The application of TiO₂ coated pellets in DBD reactors will enforce the hydrocarbon byproducts to further be oxidized to CO₂, notwithstanding, it will not significantly improve the performance of the reactors in the decomposition of toluene and acetone, and in the formation of CO. The results show that the best selectivity of CO₂ for acetone decomposition in a TiO₂ coated pellets packed-bed reactor was approximately 40% higher than that in a glass packed-bed reactor.     

Preparation, characterization and properties studies of quinine-imprinted polymer in the aqueous phase

The uniform-sized spherical molecularly imprinted polymers were successfully prepared through molecular imprinting technology by two-step seed swelling and mini-emulsion polymerization in the aqueous condition using quinine as template molecules and methacrylic acid (MAA) as functional monomer. The polymers were characterized by IR spectra, thermal-weight analysis, scanning electron microscope and laser particle size analysis. The properties of imprinted polymers were investigated in different organic phases and aqueous media. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions) between acidic monomer/polymer and template molecules are mainly responsible for the binding and recognition; whereas in the aqueous medium, a considerable recognition effect was also obtained where the ionic (electrostatic) interaction and hydrophobic interaction play an important role. The experiments of binding different substrates indicated that the MIPs possessed an excellent rebinding ability and inherent selectivity to quinine. __________ Translated from Zhongshan Dcocue Xuebao/Acta Scientianum Natralium University Sunyatseni, 2005, 44(3)(in Chinese)     

β-内酰胺类抗生素酶促合成新进展

β-内酰胺类抗生素的合成在制药工业中占据重要的地位, 相关的酶促合成方法研究备受关注; 酶促合成显著提高合成效率, 减少三废的排放, 是实现绿色合成的有效方法. 综述了近年来β-内酰胺类抗生素酶促合成研究的新进展, 包括一锅合成法、原位产物排出法、介质技术和酶固定化方法.     

Pretreatment studies of cellulose wastes for optimization of cellulase enzyme activity

The composition of cellulose, hemicellulose, starch, lignin, pectin, protein, and total lipid content in the selected cellulosic wastes-tapioca (Manihot esculenta) stem, leaf, petiole, and water hyacinth (Eichhornia crassipes) were determined. The effectiveness of various physical and chemical pretreatments on the enzymatic digestibility of these wastes were identified. In general, chemical pretreatments were more effective than physical pretreatments. The efficiency of the pretreatment was checked by subjecting these wastes to enzymatic saccharification after the pretreatments.     

On-channel base stacking in microchip capillary gel electrophoresis for high-sensitivity DNA fragment analysis

We evaluated a novel strategy for high-sensitivity DNA fragment analysis in a conventional glass double-T microfluidic chip. The microchip allows for a DNA on-channel concentration based on base stacking (BS) with a microchip capillary gel electrophoretic (MCGE) separation step in a poly(vinylpyrrolidone) (PVP) sieving matrix. Depending if low conductivity caused a neutralization reaction between the hydroxide ions and the run buffer component Tris+, the stacking of DNA fragments were processed in the microchip. Compared to a conventional MCGE separation with a normal electrokinetic injection, the peak heights of 50-2650-base pair (bp) DNA fragments on the MCGE-BS separation were increased 3.9-8.0-fold. When we applied the MCGE-BS method to the analysis of a clinical sample of bovine theileria after PCR reaction, the peak height intensity of the amplified 816-bp DNA fragment from the 18S rRNA of T. buffeli was enhanced 7.0-fold compared to that of the normal injection method.