Integrated extraction and purification of total bioactive flavonoids from Toona sinensis leaves

An integrated procedure was developed to extract and purify total flavonoids from Toona sinensis leaves for the first time, in which pressurized liquid extraction was performed in tandem with HPD100 macroporous resin column. Consequently, the total flavonoids can be extracted using 10% EtOH, and the recovery and purity of total flavonoids was 71.05% and 66.60%. Moreover, products of high quality were obtained in an environmentally friendly process with lower consumption of time and solvent. The results demonstrated that the integrated extraction-adsorption procedure was an efficient process for the preparation of total bioactive flavonoids from Toona sinensis leaves.     

Screening and isolation of cyclooxygenase‐2 inhibitors from the stem bark of Phellodendron amurense Ruprecht by ultrafiltration with liquid chromatography and tandem mass spectrometry,and complex chromatography

Nonsteroidal anti‐inflammatory drugs appear to reduce the risk of developing cancer. One mechanism through which nonsteroidal anti‐inflammatory drugs act to prevent carcinogenesis is inhibition of the activity of the enzyme cyclooxygenase‐2. The cyclooxygenase‐2 inhibitors are widely used to reduce the risk of developing cancer. Natural products are considered to be a promising source of several novel cyclooxygenase‐2 inhibitors. Ultrafiltration with liquid chromatography and mass spectrometry is an efficient method that can be applied to rapidly screen and identify the ligands from the barks of Phellodendron amurense Ruprecht. A continuous online method comprised of pressurized liquid extraction, countercurrent chromatography, and semi‐preparative liquid chromatography was developed for the efficient scaled‐up production of eight compounds with high purities. The bioactivities of the separated compounds were assessed by an in vitro enzyme inhibition assay. The use of bioactivity screening method combined with preparation method of bioactive compounds and an in vitro enzyme inhibition assay facilitated the efficient screening and isolation of the cyclooxygenase‐2 inhibitors from complex samples. This could be used as an efficient method for the large‐scale production of functional ingredients.     

次烟煤与木质素共热溶物的液化及其Ni-Mo-S/Al2O3催化剂循环利用性能

对神府次烟煤与木质素共热溶得到的四种具有不同热溶产率的热溶物进行元素分析、红外光谱、同步荧光光谱等表征,对四种热溶物和神府原煤的加氢液化性能进行比较,并进行了催化剂在热溶物液化过程的循环利用性能研究。结果表明,神府煤热溶物较同一温度得到的神府煤与木质素共热溶物具有更多的芳香组分和四环及其以上的多环芳烃。热溶物较神府原煤在液化时具有更高的转化率和油收率。在催化剂Ni-Mo-S/Al₂O₃作用下,热溶物在液化过程中几乎全部转化,并具有很高的油收率,且神府煤与木质素共热溶物较神府煤热溶物具有更高的油收率。在神府煤与木质素共热溶物的液化过程中,催化剂Ni-Mo-S/Al₂O₃表现出优异的可循环利用性能,经过四次循环利用后没有观察到催化剂表面的炭沉积现象。     

增容剂对煤直接液化残渣改性沥青低温性能的影响

为了评价不同增容剂对煤直接液化残渣改性沥青低温性能的影响,首先,通过正交实验确定出三种增容剂（硅烷偶联剂、苯甲醛、二甲苯）各自的最佳掺量及掺入方式;其次,采用双边缺口拉伸（DENT）试验评价加入三种增容剂后沥青的低温抗延性断裂性能;最后,结合SEM照片并利用Image Pro plus图像处理软件计算加入三种增容剂后沥青中煤直接液化残渣的分散面积比,以定量地表征三种增容剂对煤直接液化残渣改性沥青低温性能的改善效果。结果表明,加入适量增容剂在一定程度上有助于煤直接液化残渣在沥青中的分散,提高两者之间的相容性,保持煤直接液化残渣改性沥青体系的长期稳定状态,避免因煤直接液化残渣的沉淀聚集而在相界面产生应力集中,增强煤直接液化残渣改性沥青的低温抗延性断裂性能。三种增容剂对煤直接液化残渣改性沥青低温性能改善效果不同,硅烷偶联剂最优,次之为苯甲醛,最差为二甲苯。     

生物质的液化转化及其产物的分离分析实验设计

设计了一个综合性化学实验——生物质的液化转化及其产物的分离分析。实验内容包括生物质（麦秆）的醇解液化;气/液/固产物的收集与分离,以及用气相色谱仪、气相质谱联用仪、红外光谱仪和热重分析仪等对产物成分与结构的检测与表征;液体产物（生物油）的萃取与柱层析分离,以提取苯乙酮、2,6-二甲氧基苯酚等高附加值化学品。该实验从社会能源现状出发,使学生的理论知识与实际应用相结合,可以激发学生对于新能源化学的兴趣;实验中涉及到多种分离纯化手段的运用和产物分析仪器的使用,提高了学生基本实验技能、动手操作能力和数据处理能力;同时鼓励学生进行知识拓展,进行创新方案设计。     

亚微米C18键合硅胶固定相加压毛细管电色谱法同时拆分3种手性三唑类农药

采用改良Stöber法制备420 nm亚微米单分散二氧化硅微球,采用C18硅烷化修饰后装填成毛细管色谱柱。采用该色谱柱,在加压毛细管电色谱平台上成功地实现了3对手性三唑类农药烯效唑、烯唑醇和丙环唑的同时拆分和分离。考察了各因素对手性分离效果的影响,优化后的色谱条件为：流动相为乙腈-20 mmol/L磷酸盐缓冲液（pH=6.8）（45：55,v/v）,其中缓冲液中含20 mmol/L羟丙基-γ-环糊精（HP-γ-CD）;泵流速为0.04 mL/min;施加电压-9.4 kV;检测波长220 nm。在上述条件下,烯效唑、烯唑醇和丙环唑3种对映体同时得到拆分和分离,相邻两峰之间的分离度依次为4.20、12.9、4.41、4.09、1.70,分离时间仅为12 min,柱效最高达到310000 plates/m。该研究为手性三唑类农药的同时分离提供了新的分离分析思路。     

燃爆压裂中压挡液柱运动规律的动力学模型

针对燃爆压裂过程中压挡液柱受冲击运动机理的复杂性,假设火药燃气与压挡液柱存在完全气液 接触界面,采用拉格朗日的微元分析方法,建立了由连续性方程、动量守恒方程、能量守恒方程组成的压挡液 柱运动规律动力学模型,并给出了该模型与火药燃爆模型的耦合数值解法。经程序编制和实例计算表明,在 综合考虑火药燃气对液柱的宏观推动作用、冲击压缩作用、液柱自身的动能分布及管壁对其摩擦阻力的影响 后,火药燃烧过程中气液界面上升高度有限(实例计算不足0.1m),可起到很好的持压作用;但全过程中最高 液柱位移较大(18.9m),水力振荡增效作用明显。研究成果对提高燃爆压裂的数值模拟精度具有一定促进 作用。     

1 μm硅胶颗粒固定相的加压电色谱分离性能

制备了1 μm无孔硅胶颗粒。通过电动填充法得到总长度为45 cm(固定相填充长度为20 cm)、内径为100 μm的毛细管色谱柱。以乙腈-水体系作为流动相,详细考察了碱性化合物在该色谱柱上的加压电色谱(pCEC)分离性能,讨论了流动相比例、缓冲液浓度、pH值及操作电压等因素对分离的影响。实验结果表明,裸硅胶柱在乙腈-水体系分离碱性样品中表现出典型的反相色谱分离性能;缓冲液浓度的改变则对分离影响不大。当pH值改变时,碱性化合物的解离程度发生变化,它们与固定相之间的作用力发生变化,使得分离度发生相应的变化。分离柱效随施加电压的增加而增加,在1 kV电压下,裸硅胶柱对邻甲苯胺的柱效为35000理论塔板/m。     

Copper(II) oxide solubility behavior in aqueous sodium phosphate solutions at elevated temperatures

A platinum-lined, flowing autoclave facility is used to investigate the solubility behavior of copper(II) oxide (CuO) in aqueous sodium phosphate solutions at temperatures between 19 and 262°C. Copper solubilities are observed to increase continuously with temperature and phosphate concentration. The measured solubility behavior is examined via a Cu(II) ion hydrolysis/complexing model and thermodynamic functions for the hydrolysis/complexing reactions are obtained from a leastsquares analysis of the data. Altogether, thermochemical properties are established for five anionic complexes: Cu(OH) ₃ ^– , Cu(OH) ₄ ^2– , Cu(OH) ₂ (HPO ₄ ) ^2– , Cu(OH) ₃ (H ₂ PO ₄ ) ^2– , and Cu(OH) ₂ (PO ₄ ) ^3– . Precise thermochemical parameters are also derived for the Cu(OH)⁺ hydroxocomplex based on CuO solubility behavior previously observed (Ref. 3) for pure water at elevated temperatures. The relative ease of Cu(II) ion hydrolysis is such that Cu(OH) ₃ ^– species become the preferred hydroxocomplex for pH9.4.Prepared for presentation at the Fourth International Symposium on solubility Phenomena, Rensselaer Polytechnic Institute, August 1990.     

关于压水堆产武器级钚的模拟计算

防止核扩散是国际社会共同努力的目标,其中武器级核材料的防扩散是重中之重.钚是反应堆的副产品,如果不计较经济效益,利用铀为核燃料的反应堆都可以生产武器级钚.本文基于日本Takahama-3压水堆建立了五个模型,并进行中子和燃耗计算,得到两种燃料棒产武器级钚的条件、燃料棒轴向的燃耗分布、组件内燃料棒燃耗的变化区间和全堆芯燃料棒径向燃耗分布.基于上述模型和计算数据给出压水堆堆芯内含有武器级钚的准确位置和UO_2燃料棒中武器级钚的产量.这种低燃耗的乏燃料给国际核不扩散带来了巨大风险,国际社会应该加强对此类乏燃料的监管.