The effect of interface deformation due to gravity on line tension measurement by the capillary rise in a conical tube

Much research has been done on line tension measurement and interpretation, and attempts have also been made to measure line tension with simple, cheap and reliable methods that do not require excessive sophistication. Of particular interest is the method of determining line tensions of solid–liquid–vapor systems from the capillary rise in a conical tube. This simple and relatively inexpensive method gives line tension values comparable to those reported in the literature obtained via highly sophisticated instruments or techniques such as the well known axisymmetric drop shape analysis technique. The absolute value of line tension obtained using the conical tube method and assuming a spherical liquid–vapor interface is larger but of the same order of magnitude (1 μJ m⁻¹) as that reported in the literature. A theoretical analysis presented herein shows that by including the deformation of the liquid–vapor interface due to gravity in the conical capillary analysis, the line tension value inferred from the experimental data is reduced by approximately 50% and compares better with values in the literature obtained using other sophisticated methods. Thus a relatively simple, cheap, accurate and reliable method of line tension measurement has been advanced.     

Estimation of the dimensions of nano-capillaries from gas adsorption data

A new approach is presented to determine the dimensions of cylindrical nanopores from adsorption measurements.     

The effect of injection procedures on efficiency in micellar electrokinetic capillary chromatography

Summary Micellar electrokinetic capillary chromatography (MECC) involves the application of a high voltage (10–30 KV) across a capillary column (75μm i.d.) which is filled with a solution containing micelles. The mobile phase in this work consisted of sodium dodecyl sulfate in an aqueous borate/phosphate buffer system. Injection parameters in MECC were investigated to minimize the contribution to band-broadening resulting from the injection process. Efficiencies as high as 240,000 theoretical plates/meter are reported.     

反相毛细管电色谱中中性化合物的保留及有机改性剂对其保留值的影响

以硫脲作为电渗流标记物测定的死时间和以苯同系物线性回归方法测定的死时间为基础，将液相色谱中溶质保留值方程应用到电色谱中，得到了容量因子与二元流动相体系中有机改性剂含量之间的关系曲线；通过实验数据说明了一些极性的电中性化合物在电场作用下也会发生迁移而引起保留值的变化，且这种变化还受有机改性剂含量的影响。     

超临界流体萃取-胶束电动毛细管色谱法分离测定大黄中蒽醌类组分的含量

采用ＳＴＥ－ＭＥＣＣ法分离测定大黄中的芦荟大黄素，大黄素和大黄酸。萃取条件为压 力４１．４ＭＰａ，温度５０℃，改性剂量０．４ｍＬ。被测组分在１０ｍｉｎ得到全部分离。本法准确、简 便、快速、结果令人满意。     

One-Step Synthesis of Monolithic Silica Nanocomposites in Fused Silica Capillaries

The ideal way to prepare efficient, yet robust stationary phases for microanalytical high-resolution methods such as capillary chromatography and electrochromatography remains to be defined. In this contribution a one step sol-gel process is proposed for the production of monolithic, macroporous nanocomposite phases in fused silica capillaries, which require no additional derivatization, since they already bear the interactive (C8) moieties. The effect of the catalyst, the water content, the pH, as well as that of certain additives on monolith formation and porosity is investigated. Volume shrinkage and a tendency to crack were the major obstacles to overcome. Homogeneous stationary phases could be produced by applying a pH gradient during sol formation, thereby changing the catalytic principle from acidic (0.1 M HCl) to basic (gradual formation of OH^– as a consequence of the hydrolysis of N-methylformamide). Gelation/coacervation of suchgels could be induced by the addition of N,N-diethylamine. The water content during sol formation was determined as decisive for pore formation, with 250% of the amount theoretically needed for complete hydrolysis of all precursors giving optimal results. The volume shrinkage problem during xerogel formation was resolved by integrating dialkyldialkoxysilane units (dimethyldiethoxysilane 35 mol%) into the silica network.     

Speciation analysis of inorganic arsenic by microchip capillary electrophoresis coupled with hydride generation atomic fluorescence spectrometry

A novel method for speciation analysis of inorganic arsenic was developed by on-line hyphenating microchip capillary electrophoresis (chip-CE) with hydride generation atomic fluorescence spectrometry (HG-AFS). Baseline separation of As(III) and As(V) was achieved within 54 s by the chip-CE in a 90 mm long channel at 2500 V using a mixture of 25 mmol l(-1) H3BO3 and 0.4 mmol l(-1) CTAB (pH 8.9) as electrolyte buffer. The precisions (RSD, n=5) ranged from 1.9 to 1.4% for migration time, 2.1 to 2.7% for peak area, and 1.8 to 2.3% for peak height for the two arsenic species at 3.0 mg l(-1) (as As) level. The detection limits (3sigma) for As(III) and As(V) based on peak height measurement were 76 and 112 microg l(-1) (as As), respectively. The recoveries of the spikes (1 mg l(-1) (as As) of As(III) and As(V)) in four locally collected water samples ranged from 93.7 to 106%.     

一种非晶硅膜改性弹性玻璃毛细管交联中等极性固定相色谱柱的制备

研究了非晶硅膜改性的弹性玻璃毛细管交联ＯＶ－１７０１中等极性固定相色谱柱。在适当温度下，采用过氧化二异丙苯（ＤＣＵＰ）游离基引发交联ＯＶ－１７０１固定液，成功地制备了交联ＯＶ－１７０１柱，该柱具有柱效高、惰性好、耐溶剂、抗腐蚀和耐高温等性能，是一种新型高性能的中等极性交联柱。     

On-line multidimensional chromatography using packed capillary liquid chromatography and capillary gas chromatography

The introduction of selected fractions from a liquid chromatograph into a gas chromatograph has been described; however, analyses were performed by off-line experiments requiring collection and reinjection of the separate fractions or by on-line procedures where disadvantageously, only a fraction of the separated peak or a well resolved component in a mixture could be introduced into a gas chromatograph. This disadvantage is overcome by the apparatus and method described in this paper, which utilizes a multidimensional chromatography system employing a high efficiency, packed capillary LC column coupled on-line to a capillary gas chromatograph. The liquid chromatograph (so designed) can act as a highly efficient clean-up or chemical class fractionation step prior to introduction into the gas chromatograph, significantly reducing sample preparation times in many applications. Thus minor components in a complex matrix can be determined without prior sample clean-up, an example of which is the determination of polychlorinated biphenyls in a complex hydrocarbon matrix.     

Synthesis of siloxane stationary phases for capillary gas chromatography and supercritical fluid chromatography

A comparison is made between dichlorosilanes and cyclic siloxanes as starting materials in the synthesis of stationary phases for capillary gas chromatography (CGC) and supercritical fluid chromatography (SFC). Siloxanes containing one or more of the side groups methyl, vinyl, phenyl, and cyanoethyl in various ratios were synthesized and compared. These phases were characterized by chromatographic (gel permeation, GPC), spectroscopic (IR, ¹H NMR, ²⁹Si NMR), and thermal (DSC) methods. Coated fused silica columns were evaluated with respect to polarity, crosslinkability with several free-radical initiators, and thermal stability. A new liquid phase, 7% cyanoethyl, 7% phenyl, 1% vinyl methyl polysiloxane is shown to be more polar than OV-1701, more temperature stable, easily crosslinked and suitable for use in supercritical fluid chromatography.