On the discrete-time Geo/G/1 queue with randomized vacations and at most J vacations

This paper examines a discrete-time Geo/G/1 queue, where the server may take at most J − 1 vacations after the essential vacation. In this system, messages arrive according to Bernoulli process and receive corresponding service immediately if the server is available upon arrival. When the server is busy or on vacation, arriving messages have to wait in the queue. After the messages in the queue are served exhaustively, the server leaves for the essential vacation. At the end of essential vacation, the server activates immediately to serve if there are messages waiting in the queue. Alternatively, the server may take another vacation with probability p or go into idle state with probability (1 − p) until the next message arrives. Such pattern continues until the number of vacations taken reaches J. This queueing system has potential applications in the packet-switched networks. By applying the generating function technique, some important performance measures are derived, which may be useful for network and software system engineers. A cost model, developed to determine the optimum values of p and J at a minimum cost, is also studied.     

主惯导旋转调制对传递对准性能的影响

旋转调制技术在调制惯性器件常值误差,有效提高惯导系统长航时导航精度的同时,也引入了由系统旋转而造成的速度误差以旋转周期和旋转周期二倍频波动,这种波动对以速度为匹配量的传递对准有一定的影响。从旋转调制系统的误差特性出发,分析了旋转调制对以速度为匹配量传递对准的有利和不利影响,并针对不同的旋转调制周期进行了仿真验证,仿真结果表明当旋转周期远大于舒勒周期时,旋转调制引起的不利和有利影响都很小,可忽略不计;当旋转周期远小于舒勒周期时,旋转调制可提高子惯导的方位对准精度,但延长了系统的传递对准时间。例如,当旋转周期为3(°)/s时,水平对准时间由3 min延长到4 min,而对准精度由1.2′提高到0.2′;方位对准时间由10 min延长到16 min,而对准精度由2.2′提高到0.4′。     

A Dynamic Supplier Selection and Inventory Management Model for a Serial Supply Chain with a Novel Supplier Price Break Scheme and Flexible Time Periods

A new supplier price break and discount scheme taking into account order frequency and lead time is introduced and incorporated into an integrated inventory planning model for a serial supply chain that minimizes the overall incurred cost including procurement, inventory holding, production, and transportation. A mixed-integer linear programming (MILP) formulation is presented addressing this multi-period, multi-supplier, and multi-stage problem with predetermined time-varying demand for the case of a single product. Then, the length of the time period is considered as a variable. A new MILP formulation is derived when each period of the model is split into multiple sub-periods, and under certain conditions, it is proved that the optimal solution and objective value of the original model form a feasible solution and an upper bound for the derived model. In a numerical example, three scenarios of the derived model are solved where the number of sub-period is set to 2, 3, and 4. The results further show the decrease of the optimal objective value as the length of the time period is shortened. Sufficient evidence demonstrates that the length of the time period has a significant influence on supplier selection, lot sizing allocation, and inventory planning decisions. This poses the necessity of the selection of appropriate length of a time period, considering the trade-off between model complexity and cost savings.     

Calculation of cladding modes using both two layer and three layer geometry in LPFG

In this paper we have calculated cladding modes of long period fiber grating. We have calculated cladding modes using both two layer (Graphical solution method) geometry and three layer geometry proposed by Erdogan. We have compared both these techniques, discussed the limitations of Graphical solution method and benefits of three layer geometry.     

Theoretical Research on Sensitivity for Resonance Wavelength of Long Period Fiber Grating

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ａｌｏｎｇｐｅｒｉｏｄｆｉｂｅｒｇｒａｔｉｎｇ (ＬＰＦＧ)ｉｓａｎｏｖｅｌｐａｓｓｉｖｅｆｉｂｅｒｅｌｅｍｅｎｔａｒｉｓｉｎｇｉｎｒｅｃｅｎｔｙｅａｒｓ[1] .ＳｅｖｅｒａｌａｐｐｌｉｃａｔｉｏｎｓｏｆＬＰＦＧｈａｖｅｂｅｅｎｆｏｕｎｄ ,ｓｕｃｈａｓ ｇａｉｎ ｐｒｏｆｉｌｅｆｌａｔｔｅｎｅｄｆｉｌｔｅｒ,ｂａｎｄ ｒｅｊｅｃｔｉｏｎｆｉｌｔｅｒ,ａｎｄｔｅｍｐｅｒａｔｕｒｅ ,ｓｔｒａｉｎｏｒｎｅｗｃｈｅｍｉｃａｌｓｅｎｓｏｒｓ[2 ,3] .ＩｔｃａｎｂｅＵＶ ｗｒｉｔｔｅｎｏｒ…     

对称面形光栅TE模的衍射特性

本文采用耦合波方法计算了对称面形光栅的衍射效率,分析了光栅截面面形为正弦、三角形、矩形、梯形光栅衍射效率与光栅周期、沟槽深度的关系,计算了光栅的峰值衍射效率。理论计算表明:合理地选择光栅周期、沟槽深度,对称面形光栅都可以达到很高衍射效率,接近100%;光栅的峰值衍射效率基本出现在Bragg衍射且光栅的周期等于衍射波长时。     

长周期光纤光栅耦合常数的研究

长周期光纤光栅表现为前向传播的纤芯基模与同向传播的各阶次包层模式在特定波长时的模式耦合。由纤芯基模、一阶包层模式的场分布推得其功率分布 ,进一步得到两种模式的归一化常量。推导了纤芯基模与一阶各次包层模式 (HE1l/EH1l)的耦合常数。结果表明 ,纤芯基模与HE1l包层模式产生的耦合常数远大于与EH1l包层模式的耦合常数。次数低时 ,耦合常数随包层模式次数的升高而增大     

时滞差分方程的吸引性

本文给出了时滞差分方程x_n+1=x_nf(x_n,x_n-1),n=0,1,…解的全局吸引性的一个新的充分条件;作为应用,部分解决了G.Ladas的一个猜想.     

A direct approach to sojourn times in a busy period of an M/M/1 queue

In this paper we present a direct approach to obtaining joint distributions of various quantities of interest in a busy period in an M/M/1 queue. These quantities are: the sojourn times and waiting times of all the customers in the busy period, the busy period length and the number of customers served in a busy period. Since the evolution of the total workload process between two successive customer arrivals is deterministic, this work gives statistic of the complete evolution of the workload process within a busy period. This work was done when the author was post doctoral fellow with the MAESTRO group at INRIA, Sophia Antipolis, France, and was supported by project no. 2900-IT-1 from the Centre Franco-Indien pour la Promotion de la Recherche Avancee (CEFIPRA).     

表面润湿法合成β沸石体系中晶种作用的研究

系统研究了表面润湿法合成β沸石的体系中,干晶种、润湿态晶种、异晶晶种(Y沸石、ZSM 5沸石)以及碱处理β沸石晶种在此晶化体系中的作用.采用β沸石产品及异晶作晶种时,可使产品的相对结晶度稍有提高,但对沸石微晶核的结构导向作用不明显.经浓碱液处理20min后的β沸石产品(碱处理晶种)作晶种引入晶化体系后,可以显著提高产品的相对结晶度,降低模板剂的用量,缩短晶化诱导期,成为表面润湿法合成β沸石体系的有效晶种形式.