触头用银合金粉末的氧化性能和氧化后的组织结构

通过热重实验和扫描电子显微等方法，研究了４种触头用银合金粉末的氧化性能及氧化后的组织结构。发现Ａｇ－Ｓｎ－ＲＥ合金粉末氧化以后，在粉末表层形成一层纯银层，其组织结构理想；它的氧化性能最好，适于制备触头材料。Ａｇ－Ｓｎ－ＲＥ合金粉末的优良氧化性能与其氧化后理想的组织结构有关。稀土元素可以降低合金粉末的氧化温度，其它影响作用有待于进一步研究。     

包覆Y(OH)3的球形Ni(OH)2的电化学性能

利用软嵌式粉末电极技术研究了Y(OH)3包覆对球形Ni(OH)2电化学性能的影响. 循环伏安结果表明, 在球形Ni(OH)2的氧化过程中存在Ni(Ⅲ)和Ni(Ⅳ)的两步氧化反应, 产生的Ni(Ⅳ)不稳定, 能分解产生NiOOH和氧气, 所以可将Ni(Ⅲ)→Ni(Ⅳ)看作副反应. Y(OH)3包覆层对Ni(OH)2氧化过程后期的副反应, 特别是Ni(Ⅲ)→Ni(Ⅳ)具有较好的抑制作用. 由包覆后的Ni(OH)2制成的模拟电池表现出很好的高温性能, 在1C充放电条件下, 当Y的摩尔分数为1.61%时, 在60 ℃时所对应的容量保持率可达到25 ℃的92.7％; 当Y的摩尔分数仅为0.55 %时, 在60 ℃时所对应的质量比容量也可达到241.3 mA·h/g.     

Tl2S: Re-Determination of Crystal Structure and Stereochemical Discussion

The crystal structure of synthetic carlinite, Tl₂S, was re-determined by single crystal and powder X-ray diffraction methods. The cell parameters obtained from Rietveld refinement are a=12.150(2) Å, c=18.190(4) Å, V=2325.5(7) ų. A single crystal data refinement proved Tl₂S crystallizing in the trigonal space group R3 with M=440.8gmol⁻¹, Z=27, R=0.076, and wR=0.145. The atomic arrangement found is that of a strongly deformed anti-CdI₂ type, but the deformation is clearly different from that given by previous workers. In the five crystallographically different STl₆ octahedra the S-Tl distances vary between 2.82 and 3.09Å, the Tl-Tl edges between 3.52 and 4.58Å. The common features of these octahedra are (i) each one with a definitely smaller vs larger Tl₃ face in trans-position, both faces parallel or sub-parallel (00.1), and (ii) each three shorter and longer S-Tl distances to the atoms of the larger and smaller Tl₃ faces, respectively. The Tl-Tl contacts between different Tl₂S sheets are on the average definitely shorter than the ones within the sheet and they can be smaller than the Tl-Tl contacts in the small Tl₃ faces of the STl₆ octahedra. The atomic arrangement indicates that the single electron pairs of the monovalent Tl atoms are not arranged all parallel to the z-axis, as one would expect for Tl₂S with an ideal anti-CdI₂ structure. The surrounding of the S atoms resembles that of one-third of the Cl atoms in yellow InCl. The absorbance of Tl₂S is very low at wave numbers approximately <9000 cm⁻¹.     

Kristallstrukturanalyse von Ammonium-catena-polyphosphat II mit Röntgenpulvertechniken

Crystal Structure Determination of Ammonium catena-Polyphosphate II by X-Ray Powder Techniques The first structure determination of one of the five modifications of ammonium-catena-polyphosphate was performed using X-ray powder diffraction data. (NH₄PO₃)_nII is formed by phase transformation of (NH₄PO₃)_nI which on its part is obtained by condensation of NH₄H₂PO₄ at 200°C in presence of urea. Modification II crystallizes in P2₁2₁2₁ (a = 1 207.9(1), b = 648.87(8), c = 426.20(4) pm; Z = 4; 291 observed reflections; R(p) = 0.089; R(wp) = 0.111; R(I, hkl) = 0.088). The chain-anion runs parallel to the shortest axis, the period of identity is two. The ammonium ion is surrounded by a distorted tetrahedron of oxygen atoms (N? O-distances range from 285 to 292 pm, hydrogen bonds of middle strength).     

钙钛矿型LaNiO3、LaMnO3的形成条件

用混合硝酸盐分解法和柠檬酸络合法分别制取了单一钙铁矿型多晶粉末LaNiO_3和LaMnO_3. XRD分析表明LaNiO_3的形成经历了混合氧化物转化为LaNiO_3的同相反应; 而LaMnO_3晶相直接由无定形相转化而来。根据DTA、TG、IR分析两者的形成, NO_3~-离子都起了重要作用. 同时讨论了络合剂柠檬酸的作用.     

In situ neutron powder diffraction investigation of the hydration of tricalcium aluminate in the presence of gypsum

The hydration of a 1:3 molar ratio of tricalcium aluminate, Ca₃Al₂O₆, to gypsum, CaSO₄·2D₂O, was investigated at temperatures of 25, 50, and 80 °C using time-of-flight powder neutron diffraction combined with multiphase Rietveld structural refinement. It was shown that ettringite, Ca₆[Al(OD)₆]₂(SO₄)₃·∼26D₂O, was the first and only hydration product of the system, in contrast to a prior investigation which suggested the occurrence of a precursor phase prior to the formation of ettringite. Kinetics data showed that the hydration reaction is very sensitive to temperature: hydration at 25 °C was characterized by a single kinetic regime while hydration at higher temperatures consisted of two distinct kinetic regimes. The presence of two kinetic regimes was attributed to a change in either the dimensionality of the growth process or a change in the rate controlling mechanism in the hydration reaction.     

Structural and electrical changes in NdSrNiO4−δ by substitute nickel with copper

A novel series of the formula NdSrNi_1−xCu_xO_4−δ were synthesized for various values of x ranging from 0 to 1 in 1 atm of O₂ gas flow using conventional solid-state methods and were characterized by powder X-ray diffraction and electrical resistivity measurements. The compounds have been shown to adopt the K₂NiF₄-type structure. The oxygen stoichiometry of the compounds was determined from thermo-gravimetric analysis (TGA). An analysis of the micro-structure of the neodymium strontium nickel copper oxide is described. All the samples were semi-conducting from room temperature down to 77 K. The effect of Cu²⁺ incorporation on the structural and electrical properties of NdSrNi_1−xCu_xO_4−δ, 0?x?1, are discussed in terms of Jahn-Teller distortion of the (Ni/Cu)O₆ octahedra and mixed valence character of copper.     

配位-沉淀法制备Ni(OH)2和NiO超微粉

本工作采用配位 -沉淀法成功的制备了薄片形氢氧化镍和氧化镍超微粉末 ,通过 XRD、TG-DTA、IR及 TEM等实验手段对超微粉的组成结构进行分析表征。     

The ordered phase of methylammonium lead chloride CH3ND3PbCl3

The perovskite-structured compound methylammonium lead chloride orders into a low-temperature phase of space group Pnma, in which at 80 K each of the orthorhombic axes , and is doubled with respect to the room temperature disordered cubic phase (). The structure was solved by ab initio methods using the programs EXPO and FOX. This unusual cell basis for space group Pnma is not that of a standard tilt system. This phase, in which the methylammonium ions, are ordered shows distorted octahedra. The octahedra possess a bond angle variance of 60.663°² and a quadratic elongation of 1.018, and are more distorted than those in the ordered phase of methylammonium lead bromide. There is also an alternating long and short Pb-Cl bond along a, due to an off-center displacement of Pb within the octahedron. This suggests that the most rigid unit is actually the methylammonium cation, rather than the PbCl₆ octahedra, in agreement with existing spectroscopic data.     

Insights on the origin of the structural phase transition in BaV10O15 from electronic structure calculations and the effect of Ti-doping on its structure and electrical transport properties

Band structure calculations at the level of LMTO-ASA provide insight into the electronic structure of BaV₁₀O₁₅ and the origin of the structural phase transition. A crystal orbital Hamiltonian population/integrated crystal orbital Hamiltonian population analysis provides evidence that the crystallographic phase transition is driven by V-V bond formation. As well, the energy bands near the Fermi level are very narrow, <1 eV, consistent with the fact that the observed insulating behavior can be due to electron localization via either Mott-Hubbard correlation and/or Anderson disorder. The partial solid solution, BaV_10−xTi_xO₁₅, was examined to study the effect of Ti-doping at the V sites on the structure and electronic transport properties. In spite of the non-existence of “BaTi₁₀O₁₅”, the limiting x=8, as indicated by a monotonic increase in the cell volume and systematic changes in properties. This limit may be due to the difficulty of stabilizing Ti²⁺ in this structure. For x=0.5 both the first order structural phase transition and the magnetic transition at 40 K are quenched. The samples obey the Curie-Weiss law to x=3 with nearly spin only effective moments along with θ values which range from −1090 K (x=0.5) to −1629 K (x=3). For x>3 a very large, ∼2×10⁻³ emu/mol, temperature independent (TIP) contribution dominates. Conductivity measurements on sintered, polycrystalline samples show semiconducting behavior for all compositions. Activation energies for Mott hopping derived from high temperature data range from ∼0.1 eV for x=0-1 and fall to a plateau of 0.06 eV for x=3-7. Low temperature data for x=3, 5 and 7 show evidence for Mott variable range hoping (VRH) with a T^1/4 law and in one case between 5 and 17 K, a Efros-Shklovskii correlated hopping, T^1/2 law, was seen, in sharp contrast to BaV₁₀O₁₅ where only the E-S law was observed up to 75 K. Seebeck coefficients are small (<35 μV/K), positive, roughly TIP and increase with increasing x up to x=5. This may point to a Heikes hopping of holes but a simple single carrier model is impossible. The compositions for x>3 are remarkable in that local moment behavior is lost, yet a metallic state is not reached. The failure of this system to be driven metallic even at such high doping levels is not fully understood but it seems clear that disorder induced carrier localization plays a major role.