Diffusion of Cesium Ions in Agar Gel Containing Alkali Metal Bromides

The present paper gives an account of different aspects of the tracer diffusion of Cs⁺ ions in alkali metal bromides. We have measured the diffusion coefficients, D, of cesium ions in 1% agar gel medium at 25 ^∘C using a zone-diffusion technique over a concentration range of 5 × 10⁻⁵ to 0.1 mol,dm⁻³. The values of the diffusion coefficients were found to deviate from theory, which are explained on the basis of different types of interactions occurring in the ion-gel-water system. The study is also focused on the effect of alkali metal bromides on the obstruction effect and activation energy for the tracer-diffusion of cesium ions in agar gel medium. It is observed that both parameters, extent of obstruction, ∝, and activation energy, E, decrease with increasing charge density of the cation of the supporting electrolyte. The influence of these trends is explained on the basis of competitive hydration between the ions and agar molecules, and the relative distortion in the water structure that is brought about by these different ions and agar molecules.     

Heavy metal phosphate nanophases in silica: influence of radiolysis probed via f-electron state properties

We have assessed the feasibility of carrying out time- and wavelength-resolved laser-induced fluorescence measurements of radiation damage in glassy silica. The consequences of alpha decay of Es-253 in LaPO₄ nanophases embedded in silica were probed based on excitation of 5f states of Cm³⁺, Bk³⁺, and Es³⁺ ions. The recorded emission spectra and luminescence decays showed that alpha decay of Es-253 ejected Bk-249 decay daughter ions into the surrounding silica and created radiation damage within the LaPO₄ nanophases. This conclusion is consistent with predictions of an ion transport code commonly used to model ion implantation. Luminescence from the ⁶D_7/2 state of Cm³⁺was used as an internal standard. Ion-ion energy transfer dominated the dynamics of the observed emitting 5f states and strongly influenced the intensity of observed spectra. In appropriate sample materials, laser-induced fluorescence provides a powerful method for fundamental investigation of alpha-induced radiation damage in silica.     

Quantum chemical studies on electrophilic addition

The geometries of the 2-chloroethyl and ethylenechloronium cations, two possible intermediates in the electrophilic addition of chlorine to ethylene, have been fully optimized using ab initio molecular orbital calculations employing the split valence shell 4-31G basis set.These geometries were then used to compute more accurate wave functions using Dunning's double-zeta basis set. The bridged chloronium ion was found to be more stable by 9.35 kcal/mole, the opposite order of stability from the C₂H₄F⁺ ions. Interconversion of the two C₂H₄Cl⁺ cations was computed to have a barrier of 6.25 kcal/mole.The activation energy for this chlorination reaction, using the ethylenechloronium cation and a chlorine anion at infinite separation as the model for the activated complex, was computed to be 128.7 kcal/mole, showing that this is not a feasible gas phase reaction.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.     

Ab initio Computational Modeling of Glyphosate Analogs: Conformational Perspective

A historical perspective on the application of conformational analysis to structure-based ligand design approach is presented. The application of isodensity molecular electrostatic potential surfaces with the conformational energy surfaces (CES) have allowed us to reach pertinent conclusions for aiding synthetic and biochemical studies. Here we illustrate such an application on the modeling of the potent analogs of an important, environmentally stringent herbicidal compound glyphosate by constructing conformational energy surfaces. The systems were modeled by substituting F, Cl, and NH— OH moiety to the position of pharmacophoric nitrogen center in glyphosate structure. All the calculations were thoroughly performed with ab initio MO theory at Hartree–Fock method using 3-21G(d) basis functions. On the basis of the results, we identified the bioactive conformations for N-fluoro-glyphosate, N-chloro-glyphosate, and N-hydroxyamino-glyphosate as (−38^∘, 77^∘), (−61^∘, 111^∘), and (−167^∘, −169^∘), respectively. Geometry optimization of certain selected conformations of these compounds using hybrid DFT method with 6–31+G(d) basis functions provides nearly equal values of φ and ψ. Moreover, the results indicate that the global minimum structures of N-fluoro and N-chloro analogs of glyphosate show cyclic conformation whereas the N-hydroxyamino-glyphosate global minimum structure shows spyrocyclic and zig-zag conformation. Also, the predicted bioactive conformation of N-hydroxyamino analog optimally overlaps with glyphosate backbone in EPSPS complex with 0.1 Å RMSD value. However, the other two compounds slightly deviate from the backbone of glyphosate with RMSD of 0.92 Å for N-fluoro-glyphosate and 0.83 Å for N-chloro-glyphosate. The linear N-hydroxyamino-glyphosate exhibits relatively more number of intermolecular hydrogen bond interactions as compared to the other two analogs. Further, comparison of CES of previously studied glyphosate analogs such as N-hydroxy-glyphosate (2.2 μM) and N-amino-glyphosate (0.61 μM) with the present systems reveals the order of activity as: N-hydroxyamino-glyphosate > N-fluoro-glyphosate > N-chloro-glyphosate based on CES flexibility. Also, the calculated heats of formation of N-fluoro-glyphosate, N-chloro-glyphosate, and N-hydroxyamino-glyphosate are −288, −209, and −288 kcal/mol, respectively, which clearly indicate that the N-hydroxyamino and N-fluoro analogs of glyphosate are thermodynamically more stable than N-amino-glyphosate (−278 kcal/mol).     

Theoretical Study of Weakly Bound Dimers between Hydrogen Fluoride and Some Polar Molecules

Weakly bound linear and bent dimers, FH—X (where X = CO, OC, CNH, NCH, N₂O and ON₂), are investigated using the DFT B3LYP and ab initio MP2 methods with the same basis sets (6–311++G(3df,2pd)). The strengths of the H—C or H—N H‐bonds in dimers FH—CO, FH—CNH, and FH—N₂O are compared with those of the H—O or H—N H‐bonds in dimers FH—OC, FH—NCH, and FH—ON₂. The results obtained for the H‐bond distances, the elongation effect of the HF bond, the red shift of the HF stretching frequency, and the energy difference between the dimer and the charge transfer reveal that the H‐bonds of the first group of dimers are stronger than those of the second. The Gibbs energies calculated for the six dimer formations indicate that the weakly bound dimers are unstable at room temperature (T = 298 K) (FH—X's → FH + X's, ΔG < 0).     

Orbital correlation effects: The independent pair-potential approximation with application to the ground state and first ionized state of boron hydride

A new method is proposed for calculating correlation effects in atomic and molecular systems. The basis of the method is the formulation of a set of partial configuration expansions which yield directly variational orbital correlation corrections which are appropriately summed in order to obtain an estimate of the total correlation energy. This method is applied to the ground state of boron hydride and its cation at the equilibrium distance of BH. The results of the method are compared in detail with independent electron pair results and second order CI results. It is further shown that multiple substitutions are approximately accounted for in this method and the extent to which they are included is compared with other approximations. Finally, three methods of increasing accuracy, aimed at reducing the necessary computational effort, are given for determining the vertical ionization potential. The most economical method yields an IP of 9.70 eV or 0.03 eV less than the experimental IP. Completion of the basis is estimated to improve this value to 9.77 eV.     

Formation of the surface charge on silica in mixed solvents

At sufficiently high concentrations of methanol and of alkali salts in aqueous silica dispersions, the negative -potentials of the particles are decreased. This effect is more pronounced with lithium than with other alkali cations, and it is independent on the anion. The NMR spectra indicate lithium adsorption on silica from mixed solvents, but not in the absence of alcohol.Supported by a contract with the XMX Corporation, Burlington, Massachusetts, USA     

Influence of surface structure on surface analytical statements

The influence of surface structure of technical materials on results and statements of surface analytical methods has been investigated. Especially surface roughness as a typical property of rolled products has been observed. For this purpose samples of steel (technical surface, roughness up to 5 m) and silicon wafers (polished surface) have been analyzed by SNMS and GDOS in order to get information about changes of the surface roughness as function of the sputtering time and their influence on the statements about the depth profiles obtained.     

Partial molal volumes of ions in organic solvents from ultrasonic vibration potential and density measurements. III. Dimethylsulfoxide

The partial molal volumes of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Cl^–, Br^–, I^–, and NO ₃ ^- in DMSO at 25°C have been determined from ultrasonic vibration potential data and density data for solutions of uni-univalent electrolytes. Hepler's semiemprirical equation has been used to split ionic partial molal volumes into geometric and electrostrictive contributions. The results obtained in this work confirm the conclusion of our previous studies, namely, that the contribution of electrostriction is essentially determined by the properties of that layer of atoms, 0.3 to 0.4 nm thick, in contact with the ion and by the degree of steric hindrance of the poles of the dipole of the solvent molecule. On the other hand, the geometric contribution depends on the size of the solvent molecule and also on the arrangement of the solvent molecules about the ions. It is shown that the geometric contribution to the partial molal volume of ions is largely increased when ions cannot come close enough to the poles of the solvent-molecule dipole, owing to steric hindrance.