多巴酚丁胺的流动注射化学发光法测定

在盐酸介质中 ,高锰酸钾可氧化多巴酚丁胺产生化学发光 ,甲醛对该反应有较强的增敏作用 ,据此 ,建立了流动注射化学发光法测定多巴酚丁胺的方法 ;方法的线性范围为0.1～100mg·L -1,检出限为0.07mg·L -1 ,相对标准偏差为1.2 %(n=11,ρ=1.0mg·L -1) ;该法用于药物中多巴酚丁胺含量的测定 ,结果令人满意。     

化学发光分析法测定绿原酸

本文基于碱性介质中绿原酸对鲁米诺-铁氰化钾化学发光体系的抑制作用,首次建立了绿原酸的化学发光分析法,并探讨了其作用机理。方便简便、迅速、重复性好、灵敏度高。采用该法可测定1.0×10-8g/ml～1.0×10-5g/ml范围内的绿原酸,其检出限达到5.2×10-9g/ml,回收率为104%.     

Determination of the Constants of Binding of Acridine Dyes with Micelles of Sodium Dodecyl Sulfate Using the Quenching of Delayed Fluorescence by Heavy Atoms

The constants of binding dye molecules with the micelles of sodium dodecyl sulfate are determined using quenching of delayed fluorescence of acridine dyes by sodium iodide in aqueous–micellar solutions. Kinetic equations have been composed that describe the processes of deactivation of the excited states of dyes. By solving these equations at the concentration of the quencher sodium iodide corresponding to the minimum lifetime of triplet states and at the concentration of micelles corresponding to the least value of the delayed fluorescence quenching rate constants, we obtained the constants of binding dyes with micelles equal to 1.3·10⁷, 2.9·10⁷, and 3.1·10⁷ M^–1 for trypaflavine, acridine orange, and acridine yellow, respectively. We calculated the rate constants of quenching of the triplet states of the molecules of dyes by iodide ions (I ^–) that decreased in transition from trypaflavine to acridine orange and acridine yellow.     

Synthesis of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) by the competitive single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization in water

The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006     

纳米二氧化钛粒子分散性能的研究

以四氯化钛为原料，采用溶胶-凝胶法技术合成路线，获得了平均粒径为63nm的二氧化钛粉末。采用分散技术，不仅可以改善粒子的分散性能，而且对粒子的生长也起到一定的抑制作用。研究表明：(1)采用SDS作为分散剂时，其极性基团和非极性基团分别与水和纳米TiO2粒子相结合，从而阻隔了TiO2粒子的团聚，起到分散作用。(2)以稀土元素La作为分散剂，其独特的轨道结构，不仅扩大了能量吸收的范围，更重要的是它与TiO2形成的络合物，使其成为相对独立的小团体，而它本身很小的固溶度使其难于形成合金化组元，结果被释放出来，从而形成更小的纳米TiO2粒子，起到分散纳米TiO2粒子的作用，并同时抑制纳米TiO2粒子的生长。     

铅在铂电极上的还原电位溶出分析法

研究了以亚铁氰化钾为还原剂铅在铂电极上的还原电位溶出法；讨论了电极的预处理、阳极富集和随后的还原电位溶出及铅测定的干扰。     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

碲氢化钠还原亚胺的方法

本文报道一种还原亚胺的新方法。取代的芳基和脂肪基亚胺可以在较温和的条件下被碲氢化钠顺利地还原为相应的仲胺。