恒电流库仑法测定基准试剂三氧化二砷的含量

用恒电流库仑法测定基准试剂三氧化二砷的含量，以恒电流通过含有碘化钾，基准试剂三氧化二砷试样的弱碱性水溶液，利用工作电极铂阳极上电生滴定剂I2与亚砷酸盐定量反应，以死停终点法确定滴定终点，测量出电解电流和电解时间，根据法拉第电解定律并利用EXCEL计算出基准试剂三氧化二砷的含量。方法的回收率为100％。     

Easy saponification by metal silanolates: application in SPPS and in (S)-5-hydroxynorvaline preparation

Alkali metal trimethylsilanolates, TMSO⁻, M⁺, has been used for efficient conversion of methyl esters into their corresponding anhydrous acid salts under mild non-aqueous conditions. This strategy has been applied to SPPS for the preparation of neurotoxin cyclic analogues and in (S)-5-hydroxynorvaline synthesis.     

Hydration of complexes of 18-crown-6 with potassium nitrate or potassium picrate in the polymer phase

Adsorption of water vapor by granular polymer based on dibenzo-18-crown-6 and containing potassium nitrate or potassium picrate in the polymer phase was studied by the isopiestic method at 298 K. The adsorption of water vapor is described by isotherms corresponding (according to BDDT classification) to polymolecular absorption with a high adsorptive potential. In terms of the Aranovich model of polymolecular absorption, the monolayer capacity and differential heat of adsorption were calculated, and the stoichiometry of hydration of the potassium nitrate and potassium picrate complexes with immobilized crown ether was estimated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1940–1942, October, 1998.     

Adsorption of Pd, Ni, and Cu ions on anode-oxidized carbon fiber materials

The anodic oxidation of the carbon felt Carbonetcalon results in the formation of surface defects which serve as centers of strong adsorption of Pd^II, Ni^II, and Cu^II ions. The electrochemical reduction of adsorbed ions makes it possible to obtain metallic catalysts, which undergo multiple redox cycles without loss of metal. The catalysts are characterized by high dispersity of the reduced phase, high adsorption capacity with respect to hydrogen, and 100% selectivity in hydrogenation of acetophenone. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 81–85, January 1997     

Solvent effect on reaction rates: Reaction between sodium ethoxide and methyl iodide in ethanol + cyclohexane solvent systems

The kinetics of the reaction between sodium ethoxide and methyl iodide has been studied at 25°C in various cyclohexane-ethanol solvent mixtures with a cyclohexane content of 10 to 50% per volume. The determination of the rate constants att=0 were carried out by a new iterative method proposed in this investigation. The obtained results show that the reaction rate decreases with the increasing cyclohexane content. This behavior can be attributed to various solute-solvent interactions of electrostatic nature. On the other hand, the variation of ion and ion pairs rate constants with solvent composition permits the various solvation effects to be taken into account.     

Thermodynamics of multicomponent electrolyte solutions: Aqueous mixtures of two salts from among NaCl,KCl, NaH2PO4, and KH2PO4 at 25° C

Five of the six possible aqueous two-salt mixtures from among NaCl, KCl, NaH₂PO₄,and KH₂PO₄ have been studied by the isopiestic method at 25°C. The sixth mixture, NaCl–KCl, has been studied previously. The deviations from ideal mixing behavior are described by a series of coefficients which were found by regression analysis. The coefficients were used to calculate the excess Gibbs energies of mixing for equal ionic strength fractions of each salt and the trace activity coefficient of each salt at an ionic strength of 2 mode-kg^–1. The cross-square mixing rule is obeyed within experimental uncertainty for the excess Gibbs energies of mixing.     

双水相萃取法分离铍(Ⅱ)、铁(Ⅲ)与铁(Ⅱ)、铬(Ⅲ)、锰(Ⅱ)、铝(Ⅲ)

研究了在聚乙二醇2000(PEG)-硫酸钠(Na2SO4)-邻苯二酚紫(PV)体系中铍(Ⅱ)、铁(Ⅲ)、铁(Ⅱ)、铝(Ⅲ)、铬(Ⅲ)、锰(Ⅱ)的萃取行为。试验结果表明,铍(Ⅱ)在pH 3.5-7.0及铁(Ⅲ)在pH 4.0-7.0范围内可以被PEG相几乎完全萃取,而铝(Ⅲ)、铬(Ⅲ)在pH 1.0-7.0、锰(Ⅱ)在pH 1.0-4.5、铁(Ⅱ)在pH 1.0-4.5则不被萃取。从而实现了将铍(Ⅱ)(pH 3.5)、铁(Ⅲ)(pH 5.0)与铝(Ⅲ)、铬(Ⅲ)、锰(Ⅱ)、铁(Ⅱ)混合离子的定量分离。同时探讨了PEG相的萃取机理。     

Kinetics of heterogeneous decomposition of hydrogen peroxide

The kinetics of the decomposition of hydrogen peroxide was studied in aqueous medium in the temperature range 25–40°C in the presence of Wofatit KPS-resin in the form of Cu(II)-ammine complex ions. The rate constant was deduced at various degrees of resin cross-linkage and different concentrations of hydrogen peroxide. The order of the decomposition reaction varied from first order to half order, i.e., the order of the reaction decreased with increasing the concentration of H₂O₂. The decomposition process was found to be a catalytic reaction which was controlled by the chemical reaction of H₂O₂ molecules with the active species inside the resin particles. The mechanism of the reaction can be summarized by the equation in which the subsequent reactions of the probable active complex are discussed.     

Kinetics and mechanisms of halide ion catalysis of CO substitution reactions in Os3(CO)12 and Ru3(CO)12 metal carbonyl clusters

The results of kinetic studies on ligand substitution in [M₃(CO)₁₁X]^– complexes (M = Ru, Os; X = Cl, Br, I) are summarized. The [Os₃(CO)₁₁X]^– complexes react with PPh₃ under mild conditions to initially yield monosubstituted products [Os₃(CO)₁₀(PPh₃)X]^–. The rate of CO substitution obeys a first-order equation with respect to the concentration of the complex and does not depend on the ligand concentration. The rates of the reactions decrease in the order Cl > Br > I withH values increasing from 15 to 18 kcal mol^–1 and S values varying from –19 to –13 cal mol^–1 K^–1. The enhanced reactivities of these complexes as well as the low activation energies and negative activation entropies are discussed in terms of the effects of -X bridge formation on the transition state of the reaction. Reactions of PPN[Ru₃(CO)_11–x (Cl)] (PPN is the bis(triphenylphosphine)iminium cation;x=0, 1) and PPN[Ru₃(CO)₉(₃-I)] with alkynes are also reported. The reactivities of alkynes follow the order BuCCH PhCCH EtCCEt PhCCPh. The higher rates of the reactions of monosubstituted acetylenes compared with those of their disubstituted analogs are explained by agostic interaction between the metal atom and the C-H bond in the reaction transition state and by steric effects. The results obtained attest that the reaction with alkynes occursvia intermediates containing halide bridges and that ₃-halide complexes are more reactive than ₂-halide complexes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1540–1545, September, 1994.This work was supported by a Presidential Grant from Northwestern University. One of the authors (F. Basolo) wishes to thank Academician M. E. Vol'pin for the invitation to participate in the Workshop The Modern Problems of Organometallic Chemistry (INEOS-94) and Academician O. M. Nefedov for the invitation to publish a review in theRussian Chemical Bulletin.     

Determination of heavy metal concentration in feed and permeate streams of polymer enhanced ultrafiltration process

Polymer enhanced ultrafiltration (PEUF) is a newly developed method for the removal of heavy metals from aqueous solutions. This method was applied for the removal of mercury and cadmium with the presence of polyethyleneimine (PEI) as a water soluble polymer. After ultrafiltration experiments for metal–polymer mixtures, two separate streams, namely, retentate and permeate, former of which contains mainly metal–polymer complex and free polymer molecules while latter of which mainly contains free metal ions, were obtained. At the end of PEUF experiments, performance of operation was determined by concentration analyses which was achieved by atomic absorption spectroscopy (AAS) applied in a different way for permeate and retentate streams considering the effect of presence of polymer. For mercury analysis, cold vapor AAS was applied. It was observed that the presence of PEI did not affect the atomic absorption signal when 10% HCl was added to the sample solutions. For calcium and cadmium, flame AAS was used. It was observed that change in PEI concentration results in change in measured concentration of calcium and cadmium. Therefore, two new approaches were developed for accurate measurement of concentrations of calcium and cadmium. It was also observed that presence of other metals did not affect the accuracy of the measurement of a particular metal in the concentration range studied.