PVC基管状流通钾离子选择电极的研制及其在流动注射分析中的应用

实验装置由PVC基管状流通钾离子选择电极和与它结合的流动注射分析体系两部分组成。对该体系的分析特点和影响测定的参数进行了讨论,建立了土壤浸提液中钾测定方法,样品分析结果和火焰光度法有良好一致性。     

三个稀土-主族三金属Ln(III)-Sr(II)-K(I)配合物的结构与发光性质

用2,4,6-吡啶三甲酸和稀土钐、镝或钆的高氯酸盐溶液、碳酸锶、碳酸钾在180℃水热条件下进行反应,制备出3个含有3种金属离子的配位聚合物[LnSrK（ptc）₂（H₂O）]_n（Ln=Sm（1）、Dy（2）、Gd（3）,H₃ptc=2,4,6-吡啶三甲酸）。X射线单晶衍射分析表明三者具有相同的结构,属三斜晶系,P1空间群。配合物中配体2,4,6-吡啶三甲酸根以2种不同的配位方式与3种金属离子配位,一种方式中连接了7个金属离子,另一种方式中连接了8个金属离子。Ln（Ⅲ）为八配位,与羧基上的6个氧原子和2个吡啶环上的2个氮原子配位;Sr（Ⅱ）也是八配位,配位原子均为氧原子;K（I）与5个氧原子配位。荧光发射光谱表明,钐和镝的配合物在紫外光激发下均发射Sm（Ⅲ）和Dy（Ⅲ）两种离子的特征荧光,钆的配合物在紫外光激发下由于发生荷移跃迁而发射绿色荧光。     

超临界水中钾对甲醛降解过程影响的研究

为掌握生物质中钾对生物质超临界水降解过程的影响,选择生物质气化转化过程中生成的重要小分子中间产物甲醛作为研究对象,研究不同工艺条件下(反应温度400～650℃、压力23～29 MPa、停留时间4～12 s),单一钾成分(KHCO₃/K₂CO₃/KCl)或混合钾成分(KHCO₃、K₂CO₃、KCl)对甲醛超临界水降解气体产物的影响。结果表明,KHCO₃、K₂CO₃、KCl、混合钾均降低了气体产物中CO的体积分数,提高了CO₂的体积分数,但KCl的影响程度弱于其他三种钾成分。此外,由于不同钾成分均不利于气体产物中CO和H₂体积分数的提高,从而使得气体产物的热值降低。KHCO₃、K₂CO₃、KCl、混合钾均降低了H₂、CO、CO₂的产率以及气化率,其对H₂产率以及气化率的抑制程度从大到小依次为:混合钾、KHCO₃、K₂CO₃、KCl,且提高反应温度、延长反应停留时间时抑制气体生成的作用相对越明显。而当反应压力改变时,钾成分对H₂产率及气化率的影响程度变化较小。较高反应温度、较高反应压力、较长停留时间时,混合钾中各成分出现协同作用,明显抑制了气体产物的生成。     

Synthesis and structure of 2,3,6,8,10,13,14-heptaaza-6,8,10-trinitro-4,12-dioxapentadeca-2,13-diene 2,14-bisoxide

Alkylation of potassium salt of methylnitrosohydroxylamine with 1,7-dichloro-2,4,6-triaza-2,4,6-trinitroheptane afforded 2,3,6,8,10,13,14-heptaaza-6,8,10-trinitro-4,12-dioxapentadeca-2,13-diene 2,14-dioxide. The structure of the reaction product was established by X-ray diffraction analysis.     

钾元素对生物质主要组分热解特性的影响

采用热重-红外联用仪对松木及生物质主要化学组分半纤维素、纤维素、木质素的热解特性及钾元素对其热解特性的影响进行了研究.结果表明,半纤维素、纤维素、木质素发生热解的主要温度分别为200~350 ℃、300~365 ℃和200~600 ℃;半纤维热解产物中CO、CO₂较多;纤维素热解产物中LG和醛酮类化合物最多;木质素热解主要形成固体产物,气体中CH₄相对含量较高.三种组分共热解过程中发生相互作用使热解温度提高、固体产物增加,气体中CO增加而CH₄减少.添加K₂CO₃后半纤维素和纤维素热解温度区间向低温方向移动,固体产率提高.K对纤维素作用最明显,CO、CO₂气体与固体产物产率明显增加,醛酮类和酸类物质的产率降低;木质素受K影响相对较小,热解固体产物略有增加,挥发分中H₂O和羰基物质增加;三组分共热解减弱了钾元素的催化作用.     

Synthesis and Structure Investigation of a Novel 3-Dimensional Potassium Supermolecular Compound Based on 2,4-Dinitro Resorcinol

A novel 3‐dimensional potassium supermolecular compound [K(HDNR)(H₂DNR)(H₂O)]_n (H₂DNR?2,4‐dinitro resorcinol) was synthesized and characterized by elemental analysis and FT‐IR spectroscopy. The crystal structure investigated by X‐ray single crystal diffraction shows that [K(HDNR)(H₂DNR)(H₂O)]_n crystallizes with a monoclinic unit cell in the space group P2(1)/c with unit cell dimensions of a=17.648(5) Å, b=12.527(3) Å, c=7.735(2) Å, β=94.33(2)°, V=1705.00(73) ų, Z=4. The structure was refined to the final R=0.0670 and wR=0.0722 for 2022 observed reflections with I>2σ(I). In the compound, potassium cation is assembled into one‐dimensional chains along c‐axis through oxygen atoms from water molecules, and the chains were connected by the bridged HDNR^? anions to form a two‐dimensional net structure. The two‐dimensional nets constructed a three‐dimensional supramolecular architecture via intermolecular hydrogen bonds and N–O···π interaction. Density functional theory (DFT) B3LYP was employed to optimize the structure and calculate energies for three tautomers of HDNR^? univalent anion. Three stable tautomers were located. It was found that the structure (I) with O(1) losing hydrogen atom is more stable than the structure (II) also with O(1) losing hydrogen atom and the structure (III) with O(4) losing hydrogen atom.     

A study of the thermal decarboxylation of three perfluoropolyether salts

The thermal decarboxylation of three dicarboxylic perfluoropolyether potassium salts of relatively short chain length has been investigated and the products and kinetics of the main reactions have been defined. From the rate constants and Arrhenius parameters data, the second decarboxylation appears to be quantitatively rather close to the first.     

Application of thermal analysis to study of the synthesis of K0.5Bi0.5Tio3 ferroelectric

Synthesis of potassium bismuth titanate ferroelectric by heating of mixtures prepared using oxide precursors, i.e. Bi₂O₃, TiO₂ and K₂CO₃ was investigated. DTA, TG, XRD and SEM methods were used to study the formation of intermediate compounds and the final product. Usage of associated homogenization and grinding of precursors mixture permits to decrease the temperature of formation of K_0.5Bi_0.5TiO₃. This revised version was published online in July 2006 with corrections to the Cover Date.     

State of Water in Hydration Spheres of Potassium Iodide

Ion hydration has been studied for potassium iodide solutions with concentrations from 0 to 51 wt.% at temperatures from 288.15 to 308.15 K based on ultrasonic measurements and molar adiabatic compressibility data. For hydration complexes, structural characteristics have been determined. The structure of noncoordinated water plays a significant role even in concentrated solutions. An electrostatic ion field has a strong effect on the temperature dependence of the molar volume of hydration water. A method for the precise determination of the total solvation boundary is presented.     

Facile synthesis of 1-(arylimino)naphthalen-2(1H)-ones from anilines and 2-naphthols promoted by NaBr/K2S2O8/CAN

An efficient method has been developed for the synthesis of 1-(arylimino)naphthalen-2(1H)-ones through the cascade reaction of anilines and 2-naphthols promoted by NaBr/K₂S₂O₈/Ce(NH₄)₂(NO₃)₆. Using this protocol, a series of 1-(arylimino)naphthalen-2(1H)-ones was obtained in good to excellent yields (17 examples, 70–92% yields). The reactions may proceed through the following steps: bromination of 2-naphthols by in-situ-generated bromine from NaBr and K₂S₂O₈ to afford 1-bromonaphthalen-2-ols, coupling of 1-bromonaphthalen-2-ols with anilines to afford the corresponding amines, and subsequent oxidation of the amines into the products by Ce(NH₄)₂(NO₃)_6. These newly obtained α-imine ketones have great potentials for synthesis of special optical materials bearing naphthalene moiety.