PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m2·g-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5= 11.3μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV·s-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g-1 which is very close to its theoretical value (410.5 mAh·g-1) at a constant discharge current of 15 mA·g-1. It can retain at about 346.1 mAh·g-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.     

2,3,7‐Triazabicyclo[3.3.0]octenes Prepared by Tandem Cascade Reaction of Allyl Azides and Olefinic Dipolarophiles

Tandem cascade reactions of allylazides and olefinic dipolarophiles to give cis‐fused 2,3,7‐triazabicyclo [3.3.0]octenes ( 5, 6 or 7 ) are reported. Therein, an intermolecular dipolar cycloaddition of azide and alkene gave a triazoline which was followed by isomerization of the triazoline to a diazoester ( 4 ) and then an intramolecular dipolar cycloaddition from the diazo functional group and the double bond in 4 to give 5 . Compound 5 may further more undergo a Michael addition to give 7‐substituted‐ 2,3,7‐ triazabicyclo [3.3.0]oct‐2‐ene ( 6 ) or a tautomerization to give 2,3,7‐triazabicyclo[3.3.0]oct‐3‐ene ( 7 ). The reaction may be manipulated to stop at a particular stage by adopting a suit able solvent or an appropriate temperature.     

热敏电阻温度计的设计与制作

本文介绍了设计性实验“热敏电阻的设计与制作”的实施情况。说明了只要选题合适、要求恰当,设计性实验不仅可行,而且对物理实验训练的总结提高十分有效。     

热致液晶乙基纤维素与尼龙－1010共混物的研究

在自制单螺杆小型挤出机上通过熔融共混的办法，制备了不同配比（５／９５—２５／７５）的ＥＣ／Ｎｙｌｏｎ—１０１０共混物．用ＷＡＸＤ、ＤＳＣ、毛细管流变仪、力学性能测试等方法对共混物进行了研究．发现共混后尼龙－１０１０的形态结构有明显改变，其强度、模量都有提高，在高剪切速率下，共混物粘度大大降低．配比为１５８５时，这些性能的改进尤为明显．     

一锅法制备全乙酰吡喃溴代糖

将未保护的吡喃糖与醋酸酐在分子碘的催化下制得全乙酰吡喃糖 ,随后不经分离直接与溴化氢的冰醋酸溶液( 4 5 %)反应得到全乙酰吡喃溴代糖 .这种一锅法制备全乙酰吡喃溴代糖操作方便 ,收率高 ,经济实用且对环境友好     

络合滴定法测定钙含量微型实验研究

利用微型滴定法测定含钙制品中的Ca2 含量,并对微型滴定法与常量滴定法的平行测定结果进行了比较。结果两种方法无显著性差异,F检验t检验结果均在允许范围内,相对偏差均小于2.0%,微型滴定法的精度达到常量滴定法测定水平,能满足化学分析要求。     

微波辐射下双(2-苯并咪唑基)丙烷的合成与结构表征

与传统加热相比较,微波辐射促进的有机合成反应具有加热时间短、节能、产率高、不使用或少使用溶剂而对环境友好和节约成本等优点[1]。苯并咪唑类化合物具有广泛的生物活性而被应用到仿生有机合成、遗传学染色体研究及单层膜合成与形态研究的领域[2～4]。苯并咪唑类化合物的传统合成方法是:在HC1、多聚磷酸(PPA)、H3BO3等酸性催化剂使用下加热回流有机酸与邻苯二胺的混合物,然而反应通常需要较高的压力、温度或较长的时间,副反应多[5]。本研究在微波辐射下,以戊二酸和邻苯二胺为原料、PPA为催化剂合成了双(2-苯并咪唑基)丙烷,用正交试…     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

CoCl_2·6H_2O or LaCl_3·7H_2O Catalyzed Biginelli Reaction. One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1 H)-ones

Ｉｎｔｒｏｄｕｃｔｉｏｎ1,4 Ｄｉｈｙｄｒｏｐｙｒｉｄｉｎｅｓｏｆｔｈｅｎｉｆｅｄｉｐｉｎｅｔｙｐｅ (ｅ .ｇ .Ｉ—ＩＩＩ)ａｒｅｔｈｅｍｏｓｔｓｔｕｄｉｅｄｃｌａｓｓｏｆｏｒｇａｎｉｃｃａｌｃｉｕｍｃｈａｎｎｅｌｍｅｄｉｃｉｎｅ ,ｗｈｉｃｈｈａｖｅｂｅｃｏｍｅａｌｍｏｓｔｉｎｄｉｓｐｅｎｓ ａｂｌｅｆｏｒｔｈｅｔｒｅａｔｍｅｎｔｏｆｃａｒｄｉｏｖａｓｃｕｌａｒｄｉｓｅａｓｅｓｓｕｃｈａｓｈｙｐｅｒｔｅｎｓｉｏｎ ,ｃａｒｄｉａｃａｒｒｈｙｔｈｍｉａｓ ,ｏｒａｎｇｉｎａ .1Ｉｎｔｈｅｐａｓｔｄｅｃａｄｅ…     

综合创新型实验:乙胺嘧啶合成的设计与教学实践

乙胺嘧啶(商品名:达拉匹林)是一种抗寄生虫药物,改进了合成方法,并设计转化为创新型综合教学实验。从对氯苯乙腈出发,使用丙酸乙酯为酰化试剂,在叔丁醇钾作用下得到烯醇前体。在三甲基氧鎓四氟硼酸盐(Me3O·BF4,Meerwein盐)和碱作用下进行选择性甲基化反应得到烯醇甲醚后,与胍在碱性条件下环化得到最终产物达拉匹林,并通过红外光谱、核磁共振对其结构进行表征。改进后的实验方法具有重现性好、毒性低、操作方便、实验微型化等优点。实验过程中不仅提升了学生的实验技能和科研思维,更提高了学生的创新能力和绿色环保意识。