Novel and efficient copper-catalysed synthesis of nitrogen-linked medium-ring biaryls

Herein, a new copper-catalysed strategy for the synthesis of rare nitrogen-linked seven-, eight- and nine-membered biaryl ring systems is described. It is proposed that the reaction proceeds through a highly activated intramolecularly co-ordinated copper catalyst. The process is technically simple, proceeds under relatively mild conditions, displays a broad substrate scope and forms biologically valuable products that are difficult to synthesise by other methods. We envisage that this methodology will prove useful in a wide synthetic context, with possible applications in both target-oriented and diversity-oriented synthesis.     

应用光亲和分子进行PEG的光照修饰及蛋白质的光照偶联

合成了一种光活性标记分子-对叠氮苯甲酸,将其偶联到具有双羟基的碳酸酯与乳酸的共聚物P (LA-co-DHP)上,获得了具有光反应活性的可生物降解共聚物P(LA-co-DAP),在光照条件下,可以将蛋白质方便快捷地共价偶联到P(LA-co-DHP)聚合物纤维上.在溶液中进行PEG与对叠氮苯甲酸的光照反应,通过核磁共振光谱...     

液相色谱/四极杆-飞行时间质谱法筛查奶酪中29种禁用和限用合成色素

建立了奶酪样品中29种禁用和限用合成色素的液相色谱/四极杆-飞行时间质谱(LC/Q-TOF MS)筛查方法。样品经正己烷-水(3:1, v/v)振荡提取,得到正己烷层、水层和残渣3部分。正己烷层经旋转蒸发浓缩后,用乙酸乙酯-环己烷(1:1, v/v)溶解,经过凝胶渗透色谱(GPC)净化去除油脂。水层经乙腈振荡提取,得到乙腈-水提取液。残渣经氨水-甲醇(1:99, v/v)溶液振荡提取,得到氨水-甲醇提取液。乙腈-水提取液和氨水-甲醇提取液不需净化直接分析。结果表明: 29种不同极性范围的合成色素化合物分别得到了有效的提取,提取回收率为70%～95%。而Q-TOF MS提供的精确质量数定性功能可以将不同种类的合成色素化合物筛查出来,各化合物与精确质量质谱库中化合物的匹配度为59.66～99.47。通过Target MS/MS扫描方式进行定量,得到8种苏丹类化合物的方法检出限为0.4～2.5 μg/kg, 21种水溶性合成色素及染料化合物的检出限为20～80 μg/kg。该方法对禁用和限用合成色素的筛查范围广泛,对含有蛋白质、脂肪等基质的食品具有较好的适用性。     

载有C60的TiO2纳米粒子光催化活性

以水溶性C₆₀和TiO₂粒子为前驱体,采用水热法制备了载有C₆₀的锐钛矿型TiO₂纳米粒子。应用X射线衍射、透射电子显微镜、红外光谱、紫外-可见漫反射光谱、荧光光谱对产物进行了表征。以对-硝基苯酚为模型污染物研究了产物的光催化活性,结果表明适量负载C₆₀可以提高TiO₂纳米粒子的光催化活性,C₆₀起着传输电子、促进TiO₂光生载流子分离的作用,且经7次循环使用后对-硝基苯酚的降解效率仍能达到74%。讨论了载有C₆₀的TiO₂纳米粒子光催化降解对-硝基苯酚的机理。     

Mechanical and thermal properties of polypeptide modified hydroxyapatite/poly(L-lactide) nanocomposites

A new type of polypeptide(poly(-benzyl-L-glutamate)(PBLG))modified hydroxyapatite(HA)/poly(L-lactide)(PLLA)nanocomposites(PBLG-g-HA/PLLA)were prepared by the solvent-mixing method,and their mechanical and thermal properties were investigated.The tensile test showed that the mechanical properties of PBLG-g-HA/PLLA nanocomposites were better than that of PLLA,even a 0.3 wt%content of PBLG-g-HA in the nanocomposites could make the tensile strength 12%higher than that of the neat PLLA sample,and the tensile mod...     

Surface modification of hydrophobic NaYF_4:Yb,Er upconversion nanophosphors and their applications for immunoassay

β-NaYF4:Yb,Er upconversion nanophosphor (UCNP) is known as one of the most efficient NIR-to-visible upconversion materials, which shows great potential in bioanalytical chemistry and bioimaging. However, its applications are greatly limited due to its low water dispersibility and thus poor biocompatibility. In this paper, poly(acrylic acid) (PAA)-based ligand exchange strategies are carried out to modify oleic acid-capped hydrophobic β-NaYF4:Yb,Er UCNPs into hydrophilic ones. After efficient surface modific...     

TS3000总硫分析仪分析低压力硫化氢的研究

通过时TS3000 总硫分析仪气体进样模块的简单改装,利用仪器的富集功能,使其可以分析由质量流量控制器原理发生的低含量、低压力的硫化氢气体,解决了TS3000 总硫分析仪不能检测压力较低样品的难题.对不同含量硫化氢样气体的分析结果表明,改装后的仪器仍具有很好的线性及准确度,同时验证了仪器改装方法的可行性.     

Study on the friction and wear behavior of surface‐modified carbon nanotube filled carbon fabric composites

The functionalization of multi‐walled carbon nanotubes (MWNTs) was achieved by grafting furfuryl amine (FA) onto the surfaces of MWNTs. Furthermore, the functional MWNTs were incorporated into carbon fabric composites and the tribological properties of the resulting composites were investigated systematically on a model ring‐on‐block test rig. Friction and wear tests revealed that the modified MWNTs filled carbon fabric composite has the highest wear resistance under all different sliding conditions. Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA) revealed that MWNTs were successfully functionalized and the modification led to an improvement in the dispersion of MWNTs, which played an important role on the enhanced tribological properties of carbon fabric composites. It can also be found that the friction and wear behavior of MWNTs filled carbon fabric composites are closely related with the sliding conditions such as sliding speed, load, and lubrication conditions. Copyright © 2010 John Wiley & Sons, Ltd.