Ti掺杂苯基与乙基桥连的有序介孔有机硅的制备及其催化环己烯氧化反应

分别采用1,4-(双乙氧基硅烷)苯(1,4-BTEB)和1,2-三乙氧基硅基乙烷(1,2-BTESE)作为有机硅源,正硅酸乙酯(TEOS)为无机硅源,钛酸四丁酯(TBOT)为钛源,以Pluronic EO20PO70EO20(P123)为模板剂在酸性环境下水热合成制备了Ti掺杂的有机-无机有序介孔有机硅材料Ti-SBA-15-ben和Ti-SBA-15-et.同时,在合成过程中加入H2O2作为配合剂调节钛源水解速度,制备得到Ti-SBA-15-ben-H和Ti-SBA-15-et-H.采用FT-IR、DR UV-Vis、N2物理吸附、XRD、TG-DSC、TEM等方法对制备的样品进行了表征.结果表明:合成过程中加入H2O2制备的苯基桥连有机硅杂化材料具有较好的疏水性能,其骨架中活性4价位钛含量高,结构有序性最好.在以叔丁基过氧化氢(TBHP)为氧源的环己烯氧化反应中对制备的催化材料进行了对比评价,结果表明:Ti-SBA-15-ben-H表现出最高的催化活性,其催化的反应以环氧化产物为主,环己烯的转化率为26.9%,环氧选择性为32.8%,T i-SBA-15-et催化的反应以烯丙位氧化产物2-环己烯-1-酮为主,环己烯的转化率为8.5%,2-环己烯-1-酮选择性为41.2%.     

Electrochemical performance of a nano SnO2-modified LiNi1/3Co1/3Mn1/3O2 cathode material

The nano SnO₂-modified LiNi_1/3Co_1/3Mn_1/3O₂ was successfully prepared by a carrier transfer method. The pristine and modified samples were characterized with various techniques such as XRD, SEM, XPS and EDS. The results showed that the SnO₂ particles did not enter the crystal structure of LiNi1/3Co1/ 3Mn1/3O₂, many nano SnO₂ particles were uniformly covered on the surface of LiNi_1/3Co_1/3Mn_1/3O₂ and the modified thin layer could inhibit the dissolution of transition metal oxides. The electrochemical tests indicated that the existence of nano SnO₂ could improve the discharge capacity and rate capability owing to the decreased interfacial polarization. The cycling stability was remarkably improved at room temperature and 55 ℃. The XRD patterns of the fresh NCM electrode and after 50 cycles proved that the structural change of NCM was not so effective on the capacity fade.     

The selectivity of triethylene glycol modified glassy carbon electrode for charged and uncharged pieces

A triethylene glycol modified glassy carbon electrode(TEG–GCE) was fabricated by a controlledpotential electrolysis procedure. The performance of the film on the modified electrode surface was investigated by cyclic voltammetry with different probes. It was firstly found that while neutral pieces could penetrate the TEG film on the GCE surface, the ionic pieces, whatever it is anion or cation, was blocked by the film. This property was successfully used for determining dopamine(DA) in the presence of ascorbic acid(AA) with differential pulse voltammetry(DPV).     

离子印迹介孔材料制备及其吸附重金属的应用

离子印迹介孔材料具有吸附容量高、吸附选择性和骨架稳定等特点,在吸附分离领域有着广泛的应用前景。本文总结了目前离子印迹介孔材料的制备方法,阐述了分步合成法及一步合成法的各自特点;着重介绍了该材料在对重金属吸附和分离领域的研究与应用情况;简要说明了离子印迹介孔材料对重金属离子的吸附机理;并提出了离子印迹介孔材料在制备与应用中存在的问题。     

Highly Isospecific Polymerization of Silyl‐Protected ω‐Alkenols Using an [OSSO]‐Type Bis(phenolato) Dichloro Zirconium(IV) Precatalyst

The coordination polymerization of silyl‐protected ω‐alkenols such as ω‐alken‐α‐oxytriisopropylsilanes 1 provides poly(ω‐alkenyl‐α‐oxytriisopropylsilalne)s with a highly isospecific microstructure ([mmmm] > 95%) when a combination of [OSSO]‐type bis(phenolato) dichloro zirconium(IV) complex 2 and dried methylaluminoxane is used as the precatalyst and activator, respectively. The resulting siloxy‐substituted polymers could be efficiently transformed into the corresponding functionalized polyolefins, which contained up to 90% acetyl groups and ≈7% hydroxy groups in the terminal side chains.

     

生物降解高分子——一类重要的生物材料 2.生物相容性及脂肪族聚酯的表面改性

脂肪族聚酯是一类越来越受到关注的生物可降解生物材料。由于所有的医疗和药物制品在临床应用时都将不同程度地同机体组织或血液接触,而其表面又将是首先与机体组织或血液接触的部分,因此脂肪族聚酯医用制品的表面生物相容性更是同制品生物安全性和有效性有直接关系的性质。本文在分析脂肪族聚酯自身特性及对其制品表面生物相容性影响因素的基础上,介绍了采用物理、化学和等离子体处理方法对脂肪族聚酯制品表面生物相容性的改进。在分析和讨论各表面改性方法优点的同时,也指出了该法所存在的缺点、不足和应用的局限性。从而可为提高具体的脂肪族聚酯医用制品的表面生物相容性提供可供选择的表面改性方法。     

基于单宁酸的功能材料研究进展

单宁酸(Tannic acid,TA)是一种天然植物多元酚,广泛分布于各类植物的根、茎、叶及果实中,具有价格低廉、来源广泛、生物相容性好等特点。单宁酸分子内含有大量酚羟基和酯基活性官能团,具有高化学反应活性。由于其特殊的分子结构——大量疏水芳香环和亲水酚羟基的存在,单宁酸还易与各种分子或基团形成氢键、静电、疏水和π-π堆叠等多种相互作用,在功能材料领域应用广泛。本文总结了近年来单宁酸在功能材料领域应用的研究进展,其中主要包括贵金属纳米材料制备、表界面功能化改性、功能微胶囊构筑和自组装材料制备等,并对基于单宁酸功能材料的研究前景进行了展望。     

Synthesis of Trisubstituted Isoxazoles from Nitroenamines and Aromatic Aldehydes

A novel approach for the synthesis of trisubstituted isoxazoles from nitroenamines and aromatic aldehydes is developed. L ‐Proline/potassium carbonate system was employed to promote this process. The reaction underwent nucleophilic attack of nitroenamines to aromatic aldehydes, intramolecular denitration, tautomerization and elimination of H₂O to furnish the target compounds.     

耐高温端乙炔基聚醚酰亚胺改性含硅芳炔树脂

采用预共聚法,以含硅芳炔树脂(PSA)和端乙炔基聚醚酰亚胺(PEI)为原料,制备了端乙炔基聚醚酰亚胺改性的含硅芳炔(PEI-PSA)树脂及其与T300碳纤维平纹布的复合材料T300/PEI-PSA。通过动态热机械分析(DMA)和X射线能谱仪(EDS)研究了溶剂、溶液浓度、反应温度对预共聚反应的影响,确定了预共聚反应的最佳条件,得到了均匀分散的PEI-PSA树脂。通过红外光谱(FT-IR)、核磁共振氢谱(1 H-NMR)、差示扫描量热(DSC)、热失重(TG)、DMA和EDS等表征了PEI、PEI-PSA树脂及T300/PEI-PSA复合材料的结构和性能。结果表明,当PEI质量分数为20%时,PEI-PSA树脂浇铸体的弯曲强度达44.5 MPa,较PSA树脂浇铸体提高了90.2%;T300/PEI-PSA复合材料的弯曲强度达602.7 MPa,较T300/PSA复合材料的弯曲强度提高了124%。