Investigation of isothermal bulk polymerization ofo-alkyaryl methacrylates by DSC

The kinetics of the AIBN-initiated free radical bulk polymerization of fiveo-alkylphenyl methacrylates was studied by means of DSC in the temperature range 353–373 K, and the enthalpy of polymerization, the overall reaction rate constant and the activation energy were determined. The results were compared with those published recently on correspondingp-alkylaryl methacrylates. All measured reaction rate constants were found to increase with increasing temperature and to decrease with increasingo-alkyl substituent mass and size. It was shown thato-substituents influence the rates of polymerization to a greater extent thanp-substituents. At about 373 K, all differences in rate, most probably resulting from steric hindrance caused by the alkyl groups, disappear in both series, a phenomenon earlier observed for dimethyl phenyl methacrylates.This work was supported by the Ministry of Science of the Republic of Serbia.     

N-alkoxy-pyridinium and N-alkoxy-quinolinium salts as initiators for cationic photopolymerizations

The polymerization of n-butyl vinyl ether (BVE), cyclohexene oxide (CHO) and 3,4-epoxycyclohexyl(methyl)-3′,4′-epoxycyclohexane carboxylate (EEC) was initiated upon UV irradiation (λ_inc > 300 nm) of dichloromethane solutions containing N-ethoxy-2-methylpyridinium ( V ), N-ethoxy-4-phenyl-pyridinium ( VI ) or N-ethoxy-isoquinolinium hexafluorophosphate ( VII ). Whereas the bifunctional EEC was converted into an insoluble gel, BVE and CHO formed polymers of molar mass: M_w = 2 X 10⁴?2 X 10⁵ (PCHO) and M_w ≈ 2 X 10⁴ (PBVE). Protons are formed with a rather high quantum yield [ø(H+) = 0.48 on irradiating VII in dichloromethane; titration with sodium p-nitrophenolate] and it is, therefore, assumed that the polymerization is initiated by photochemically generated protons. © 1992 John Wiley & Sons, Inc.     

High performance liquid chromatographic separation of dipeptide and tripeptide enantiomers using a chiral crown ether stationary phase

A chiral stationary phase (CSP) based on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was evaluated for the direct resolution of the enantiomers of dipeptides and tripeptides. The type and concentration of the acid and the methanol content were optimized with regard to retention time and resolution using Ala-Phe as model peptide. A mobile phase consisting of 10 mM sulfuric acid in 70% aqueous methanol was applied to the separation of a set of 16 structurally diverse dipeptides and tripeptides. Generally, the configuration of the amino acid at the N-terminus determined the enantiomer elution order. With a few exceptions the LL- and LD-enantiomers interacted stronger with the CSP compared to the corresponding DD- or DL-enantiomers. The experimental conditions also allowed the simultaneous separation of all four stereoisomers of Ala-Phe. Addition of ammonium sulfate generally reduced retention times and enantiomer resolution. Addition of triethylamine as modifier led to an overall increase of the retention times while the resolution did not show a general trend, increasing in the case of Ala-Ala but decreasing in the case of Ala-Phe.     

Novel alginate-poly(L-histidine) microcapsules as drug carriers: in vitro protein release and short term stability

Spherical, smooth-surfaced and mechanically stable alginate-poly(L-histidine) (PLHis) microcapsules with narrow particle size distributions were prepared by incubating calcium alginate beads in aqueous solutions of PLHis. The in vitro release characteristics, drug loading and encapsulation efficiency of the microcapsules were investigated using bovine erythrocytes hemoglobin (Hb) as a model drug. The results showed that the concentration of Ca(2+) ions had a considerable effect on the drug loading, encapsulation efficiency and in vitro release behavior of the microcapsules. When the concentration of CaCl(2) in the PLHis solution was increased from 0 to 3.0% (w/v), the drug loading and encapsulation efficiency decreased significantly from 38.0 to 4.3% and from 92.9 to 8.0%, respectively, while the total cumulative release of Hb from microcapsules in phosphate buffered saline solution (PBS, pH 6.8) decreased from 96.2 to 72.8% in 24 h. No significant protein release was observed during 70 h of incubation in hydrochloric acid solution (pH 1.2). However, under neutral conditions (PBS, pH 6.8), the Hb was completely and stably released within 24-70 h. An explosion test showed that the stability of alginate-PLHis microcapsules depended strongly on the concentration of PLHis and the calcium ions in solution. [Diagram: see text] Microscopy photo of Hb-loaded alginate-PLHis microcapsules.     

Trimethylsilylcyclopentadienylchromium(III) complexes with diphenyl-2-pyridylphosphine: synthesis, structural characterisation and catalytic behaviour of [(C6H5)2PC5H4NH][(η-Me3SiCp)CrCl3]

Reaction of CrCl₃ with LiCpSiMe₃ in THF leads to the formation of a solvated intermediate, [(η⁵-Me₃SiCp)CrCl₂(THF)], which in turn reacts with diphenyl-2-pyridylphosphine to yield the complex [(C₆H₅)₂PC₅H₄NH][(η⁵-Me₃SiCp)CrCl₃] (1) in 66% yield. As a secondary product was isolated the neutral complex [(η⁵-Me₃SiCp)CrCl₂{(C₆H₅)₂PC₅H₄N}] (2) in 5% yield. The structure of complex 1 has been determined by single crystal X-ray diffraction. In the anion the metal centre shows a pseudo-octahedral geometry with the centroid of the trimethylsilylcyclopentadienyl ligand occupying the centre of three octahedral sites, and three chloride atoms completing the co-ordination sphere. Complex 1 in the presence of MAO leads to the formation of an active catalyst for the polymerization of ethylene.     

Monte‐Carlo simulation of spatial distribution of characteristic x‐rays in multi‐film targets: source size of Al Kα x‐rays in W/Al film targets

A Monte‐Carlo simulation approach has been applied to describe the spatial distribution of characteristic x‐rays in W/Al film targets of different combinations of film thicknesses for the optimal design of a small‐sized x‐ray source having a high x‐ray intensity. The result has led to optimal combinations of W and Al film targets for 100 kV electrons, e.g. W(1 µm)/Al(20 µm), W(3 µm)/Al(15 µm) and W(5 µm)/Al(8 µm). These Al/W targets could be used as x‐ray sources for a medical instrument currently under development. Copyright © 2004 John Wiley & Sons, Ltd.     

Polyaniline and polypyrrole: A comparative study of the preparation

Aniline and pyrrole have been oxidized with ammonium peroxydisulfate in aqueous solutions, in the presence of equimolar quantities of hydrochloric acid. The oxidation of pyrrole was faster; the induction period typical of aniline oxidation was absent in the case of pyrrole. As the proportion of oxidant-to-monomer molar concentration increased up to 1.5, the yield increased in both cases. Similarities between the two oxidations are illustrated and discussed. The oxidant-to-monomer molar ratio 1.25 is proposed to be the optimum stoichiometry, in the accordance with the data published in the literature. The conductivities of the polymers prepared were only slightly dependent on the oxidant-to-monomer ratio in the range 0.3-1.5, and were of the order of 10⁰ S cm⁻¹ for polyaniline and ∼10⁻²-10⁻¹ S cm⁻¹ for polypyrrole. Outside this interval, the conductivity of both polymers was reduced. Polyaniline having conductivity ∼10 S cm⁻¹ was produced in solutions of phosphoric acid of various concentrations. On the contrary, the conductivity of polypyrrole was reduced as the concentration of phosphoric acid became higher. The type of protonation is discussed with the help of FTIR spectra by analyzing the ammonium salts obtained after deprotonation. Sulfate or hydrogen sulfate anions produced from peroxydisulfate always constitute a part of the counter-ions.     

Silica-supported Copper（Ⅱ） Catalyzed Coupling of Arylboronic Acids with Imidazoles

Immobilized copper（Ⅱ） in organic-inorganic hybrid materials catalyzed Ar-N coupling of arylboronic acids with imidazoles has been developed. Arylboronic acids reacted with imidazoles smoothly in the presence of a 3-（2-aminoethylamino）propyl functionalized silica gel immobilized copper（Ⅱ） catalyst （10 mol%） in methanol without any additives and bases. The reactions generated the corresponding cross-coupling products in good yields. Furthermore, silica-supported copper can be recovered and recycled by a simple filtration procedure and used for five consecutive trials without decreases in activity.     

“逐步偶联聚合反应”在研制有序交联高分子及复合物中的应用

用“逐步偶联聚合反应”这一新的合成方法可制备不同等级的微观结构可控的有序交联网状高分子,包括可溶性的一维梯形或管状高分子、不溶性的二维或三维筛板状高分子,新型的反应性梯形聚硅氧烷包括氢梯、乙烯基或丙烯基梯、乙氧基梯及其共聚物是功能性梯形高分子的前体,由此衍生出“鱼骨形”和“划艇形”液晶和非线性高分子、盘状金属络合物液晶高分子以及管状聚硅氧烷。对功能化梯形降硅氧烷进行了有趣的应用探索,包括用于稳定液     

Nd—Al双金属活性体的组成及其对共轭双烯烃的聚合

稀土Ziegler-Natta催化剂活性体对双烯烃配位聚合的研究已有很多报道。作者曾从NdCl_3·3P_(350)~(**)-Al(i-Bu)_3体系分离出Nd-Al双金属活性体。本文从NdCl_3·3P_(350)-HAl(i-Bu)_2和Al(C_2H_5)_3反应体系中分离出一系列Nd-Al双金属活性体,用元素分析方法研究了这些活性体的组成,并综合考察了在无助催化剂AlR_3存在下从不同烷基铝获得的活性体本身对共轭双烯烃的定向聚合能力。 单体、溶剂、HAl(i-Bu)_2、Al(C_2H_5)_5及活性体的合成,聚合方法,聚合物表征均按文献[4]。