银纳米颗粒/多孔硅复合材料的制备与气敏性能研究

采用双槽电化学腐蚀法以电阻率为10-15 Ω·cm的p型<100>晶向的单晶硅片制备了孔径约为1.5 μm, 孔深约为15-20 μm的p型多孔硅, 并以此多孔硅作为基底采用无电沉积法通过调控沉积时间在其表面沉积了不同厚度的银纳米颗粒薄膜. 采用扫描电子显微镜和X 射线衍射仪表征了银纳米颗粒/多孔硅复合材料的形貌和微观结构, 结果表明银纳米颗粒较均匀的分布于多孔硅的表面上且沉积时间对产物的形貌有重要影响. 采用静态配气法在室温下研究了银纳米颗粒/多孔硅复合材料对NH₃的气敏性能. 气敏测试结果表明沉积时间对产物的气敏性能影响较大. 当沉积时间较短时, 适量银纳米颗粒掺杂的多孔硅复合材料由于其较高的比表面积以及特殊的形貌和结构, 对NH₃气体表现出较高的灵敏度、优良的响应/恢复性能. 室温下, 其对50 ppm 的NH₃气体的气敏灵敏度可以达到5.8左右.     

多孔金属薄膜阻尼减振微观机理研究

研究了多孔金属薄膜的阻尼性能和微观机理. 采用分子动力学方法及扫描电镜(SEM) 原位观察实验手段对多孔金属薄膜阻尼进行研究, 得出金属薄膜应变滞后于应力周期性变化以及弹性势能周期性衰减的规律, 并通过应变滞后应力的时间差求得损耗因子; 从微观结构上可看出, 在薄膜孔缺陷附近\langle110angle晶向上经历了位错产生、 并且位错呈阶梯状向前发射的变化; 在SEM原位拉伸、卸载实验中观察到有微裂纹的萌生、斜向阶梯扩展、收缩及消失的周期过程. 结果表明: 在周期载荷作用下, 多孔金属薄膜的孔缺陷附近产生的位错可以挣脱开弱钉扎点并限制在强钉扎点上, 由于位错的变化及附近晶界间的相对滑动产生内摩擦, 消耗了系统的部分弹性势能, 引起金属薄膜的阻尼减振效应, 从而揭示了多孔金属涂层阻尼产生的微观机理.     

Sulfur Immobilized in Hierarchically Porous Structured Carbon as Cathodes for Lithium–Sulfur Battery with Improved Electrochemical Performance

In order to overcome the main obstacles for lithium–sulfur batteries, such as poor conductivity of sulfur, polysulfide intermediate dissolution, and large volume change generated during the cycle process, a hard‐template route is developed to synthesize large‐surface area carbon with abundant micropores and mesopores to immobilize sulfur species. The microstructures of the C/S hybrids are investigated using field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherms, and electrochemical impedance spectroscopy techniques. The large surface and porous structure can effectively alleviate large strain due to the lithiation/delithiation process. More importantly, the micropores can effectively confine small molecules of sulfur in the form of S_2–4, avoiding loss of active S species and dissolution of high‐order lithium polysulfides. The porous C/S hybrids show significantly enhanced electrochemical performance with good cycling stability, high specific capacity, and rate capability. The C/S‐39 hybrid with an optimal content of 39 wt% S shows a reversible capacity of 780 mA h g^?1 after 100 cycles at the current density of 100 mA g^?1. Even at a current density of 5 A g^?1, the reversible capacity of C/S‐39 can still maintain at 420 mA h g^?1 after 60 cycles. This strategy offers a new way for solving long‐term reversibility obstacle and designing new cathode electrode architectures.     

Pulsed-Field-Gradient Measurements of Time-Dependent Gas Diffusion

Pulsed-field-gradient NMR techniques are demonstrated for measurements of time-dependent gas diffusion. The standard PGSE technique and variants, applied to a free gas mixture of thermally polarized xenon and O₂, are found to provide a reproducible measure of the xenon diffusion coefficient (5.71 × 10⁻⁶m²s⁻¹for 1 atm of pure xenon), in excellent agreement with previous, non-NMR measurements. The utility of pulsed-field-gradient NMR techniques is demonstrated by the first measurement of time-dependent (i.e., restricted) gas diffusion inside a porous medium (a random pack of glass beads), with results that agree well with theory. Two modified NMR pulse sequences derived from the PGSE technique (named the Pulsed Gradient Echo, or PGE, and the Pulsed Gradient Multiple Spin Echo, or PGMSE) are also applied to measurements of time dependent diffusion of laser polarized xenon gas, with results in good agreement with previous measurements on thermally polarized gas. The PGMSE technique is found to be superior to the PGE method, and to standard PGSE techniques and variants, for efficiently measuring laser polarized noble gas diffusion over a wide range of diffusion times.     

Regularities of the photoluminescence of porous silicon after chemical etching in HF

The effect of chemical treatment of porous silicon samples by HF on its photoluminescence and its evolution with time in sample aging in air is investigated. It is shown that the effect of HF on the luminescence parameters depends on the duration of the treatment and the initial photoluminescence intensity of the sample. It is found that chemical etching in HF accelerates the growth of the total luminescence intensity in aging of the sample in air. The evolution of the photoluminescence spectrum in aging of the sample in air after chemical etching can be explained within the framework of the quantum-size model of the luminescence of porous silicon. Presented at the Fall Meeting of the Material Research Society, December 1–5, 1997, Boston, USA Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 66, No. 3, pp. 423–427, May–June, 1999.     

Optical Behavior of ZnS:Cu Microcrystals Embedded in Porous Silica Gels

Emission and excitation spectra of ZnS:Cu microcrystals trapped in porous silica xerogels are presented. This system is characterized by intense, long-lived green emission at room temperature. It was observed that this emission was greatly reduced after compressing the xerogel samples.     

多孔硅的表面碳膜钝化

报道对多孔硅（ＰＳ）进行碳膜（ＣＦ）钝化处理的结果。红外吸收光谱表明,经钝化处理样品的表面由Ｓｉ－Ｃ、Ｓｉ－Ｎ和Ｓｉ－Ｏ键所覆盖;荧光我谱表明,经钝化处理的样品较未处理的样品发光强度提高４￣４．５倍,且发光峰位明显蓝移;存放实验显示,经钝化处理的样品发光强度稳定、发光峰位不变。这些结果表明正丁胺可以在多孔硅表面形成优良的钝化碳膜,是一种十分有效的多孔硅后处理途径。     

Echo-Planar Imaging of Porous Media with Spatial Resolution below 100 μm

A modified version of the echo-planar imaging technique incorporating a Carr–Purcell train of 180° rf pulses (PEPI) has been implemented on a standard spectrometer. It is demonstrated that artifacts in the image due to cumulative errors in the rf field can be reduced by replacing each 180° pulse by a composite sequence of three rf pulses. Artifact-free 3D images at 94 μm voxel resolution are obtained within 15 min. This technique has been applied to study the drying process in an initially water-saturated model porous medium with characteristicT^*₂of order 700 μs.     

Fe-B-Si非晶钎焊W/CLF-1接头组织和性能研究

通过电弧熔炼制备了Fe75B16.67Si8.33非晶合金,通过真空钎焊获得了钨/低活化钢接头.通过对钎焊接头表面形貌、微观组织、成分和力学性能的表征,发现在1250℃保温10min下所获得的钎焊接头界面无孔洞、裂纹等宏观缺陷,接头组织中生成了Fe固溶体、Fe3B和FeWB金属间化合物,拉伸强度高达450MPa.