New metal-rich mixed chalcogenides with an intergrowth structure: Ni<Subscript>5.68</Subscript>SiSe<Subscript>2</Subscript>, Ni<Subscript>5.46</Subscript>GeSe<Subscript>2</Subscript>, and Ni<Subscript>5.42</Subscript>GeTe<Subscript>2</Subscript>

New metal-rich mixed nickel-silicon and nickel-germanium chalcogenides, Ni_5.68SiSe₂, Ni_5.46GeSe₂, and Ni_5.42GeTe₂, were synthesized by high-temperature ceramic techniques. The X-ray diffraction study of single crystals grown from a molten flux revealed that the compounds are isostructural and crystallize in the tetragonal system (space group I4/mmm, Z = 2). These compounds are the first members of the family of M_7−δEX₂-type (M = Ni or Pd; E = Sn or Sb; X is chalcogen) intergrowth structures containing “light” p elements E. Resistivity measurements on pressed textured pellets showed that both selenides are anisotropic metallic conductors in the directions parallel and perpendicular to the heterometallic bond systems. The geometric criteria of stability of the intergrowth structure type under consideration are discussed. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1632–1638, September, 2007.     

Tetraaryl-methane analogues in group 14—V. Distortion of tetrahedral geometryin terms of through-space π–π and π–σ interactions andNMR sagging in terms of π–σcharge transfer

44 members of thecompound series Ph_4−nMR_n (M=Si, Ge, Sn, Pb; R=o-, m-, p-Tol; n=0–4) were synthesized (15 newcompounds). The crystal structures of Ph₃Sn (o-Tol) and PhSn (o-Tol)₃ were determined and compared to 16 known structures. Subject to the distanced (M–C), an interplay between through-space π–π repulsion and π–σ attraction leads to either elongated or compressed tetrahedral geometry. ²⁹ Si-, ¹¹⁹ Sn- and ²⁰⁷ Pb-NMR chemical shifts were determined in solution and in the solid state. ⁷³ Ge chemical shifts were measured only in solution. Anupfield or downfield sagging of the chemical shifts along each series is rationalized in terms of a π–σcharge transfer which is constrained by torsion of the aromatic groups.     

Response of saturated porous media subjected to local thermal loading on the surface of semi-infinite space

Heat source function method is adopted in the present paper to derive elementary solutions of coupled thermo-hydro-mechanical consolidation for saturated porous media under conjunct actions of instantaneous point heat source, instantaneous point fluid source and constant volume force. By using the so-called fictitious heat source method and images method, the solutions of a semi-infinite saturated porous medium subjected to a local heat source with time-varied intensity on its free surface are developed from elementary solutions. The numerical integral methods for calculating the unsteady temperature, pore pressure and displacement fields are given. The thermomechanical response are analyzed for the case of a circular planar heat source. Besides, the thermal consolidation characteristics of a saturated porous medium subjected to a harmonic thermal loading are also given, and the fluctuation processes of the field variables located below the center of heat source are analyzed. The project supported by the National Natural Science Foundation of China (50578008) The English text was polished byYunming Chen.     

改进型单晶炉提拉系统偏心平衡研究

随着光伏行业的快速发展, 对硅单晶的品质和长晶装备的稳定性的要求也不断提高。直拉法是生产硅单晶的主要方法,通过提高单晶炉副室的高度以扩大单晶硅的生产规模。由于副室高度的大幅增加,且单晶炉提拉头质心相对于旋转轴心有一定距离,对单晶炉整体稳定性有较大影响,从而降低了单晶硅的生产质量。针对此问题,对单晶炉建立可靠的力学分析模型,采用数值仿真方法,对单晶炉整体进行动力学响应分析,计算得到副室高度增加后的单晶炉工作时中钨丝绳下端晶棒的运动规律以及最大摆动幅度,为改进设计提供依据。数值仿真分析表明提高单晶炉副室高度后,提拉头较大的质心偏心是单晶炉提拉系统发生摆动的主要原因。在此基础上提出在提拉头上添加质心调节装置,通过控制系统调节可保证提拉头质心位置在旋转轴线上以降低提拉系统的摆动。     

Facile Synthesis of Porous Ag Crystals as SERS Sensor for Detection of Five Methamphetamine Analogs

Porous noble metal nanomaterials have attracted extensive attention due to their high specific surface area and surface plasmon resonance effect. However, it is difficult to form porous structures due to the high mobility and low reduction potential of noble metal precursors. In this article, we developed a facile method for preparing porous Ag with a controllable structure at room temperature. Two kinds of Ag crystals with different porous structures were successfully prepared by using AgCl cubes as sacrificial templates. Through the galvanic replacement reaction of Zn and AgCl, Ag crystals with a sponge-like porous structure were successfully prepared. Additionally, using NaBH₄ as the reducing agent, we prepared granular porous Ag cubes by optimizing the amount of reducing agent. Both the sponge-like and granular porous Ag cubes have clean and accessible surfaces. In addition, we used the prepared two porous Ag cubes as substrate materials for SERS detection of five kinds of methamphetamine analogs. The experimental results show that the enhancement effect of granular porous Ag is better than that of sponge-like porous Ag. Furthermore, we probed the hot spot distribution of granular porous Ag by Raman mapping. By using granular porous Ag as the substrate material, we have achieved trace detection of 5 kinds of methamphetamine analogs including Ephedrine, Amphetamine, N-Methyl-1-(benzofuran-5-yl)propan-2-amine (5-MAPB), N-Methyl-1-(4-methoxyphenyl)propan-2-amine (PMMA) and N-Methyl-1-(4-fluorophenyl)propan-2-amine (4-FMA). Furthermore, to achieve qualitative differentiation of analogs with similar structures we performed density functional theoretical (DFT) calculations on the Raman spectra of the above analogs. The DFT calculations provided the vibrational frequencies, Raman activities, and normal mode assignment for each analog, enabling the qualitative differentiation of the above analogs.     

Synthesis,Characterization and Application of Amine-Functionalized Hierarchically Micro-Mesoporous Silicon Composites for CO2 Capture in Flue Gas

An efficient CO₂ adsorbent with a hierarchically micro-mesoporous structure and a large number of amine groups was fabricated by a two-step synthesis technique. Its structural properties, surface groups, thermal stability and CO₂ adsorption performance were fully investigated. The analysis results show that the prepared CO₂ adsorbent has a specific hierarchically micro-mesoporous structure and highly uniformly dispersed amine groups that are favorable for the adsorption of CO₂. At the same time, the CO₂ adsorption capacity of the prepared adsorbent can reach a maximum of 3.32 mmol-CO₂/g-adsorbent in the actual flue gas temperature range of 303–343 K. In addition, the kinetic analysis results indicate that both the adsorption process and the desorption process have rapid adsorption/desorption rates. Finally, the fitting of the CO₂ adsorption/desorption experimental data by Avrami’s fractional kinetic model shows that the CO₂ adsorption rate is mainly controlled by the intra-particle diffusion rate, and the temperature has little effect on the adsorption rate.     

纳米羟基磷灰石/羧甲基壳聚糖多孔生物复合材料的制备与性能研究

采用化学沉淀法合成了纳米羟基磷灰石粉体(HAP),以无水乙醇为沥滤剂,以16.7%(质量分数)的柠檬酸水溶液作粘结剂,通过粒子沥滤法制备了HAP/CMCS多孔材料,并对其进行了IR、XRD、SEM、孔隙率及抗压强度的测试。结果表明HAP/CMCS复合材料复合前后两组份的化学组成未发生显著变化,但两相间发生了相互作用。多孔材料孔隙率高,孔径分布范围宽,其尺寸分布大约从几微米到600微米,以圆形为主,具有良好的贯通性,非常有利于组织在其中的长入与扩展。当复合材料中CMCS含量为40%,复合材料/造孔剂的质量比为1:1时,多孔材料的孔隙率接近75%,其抗压强度可达21MPa以上,可以满足骨组织工程支架材料的要求。     

不同形貌氮化硅纳米结构的制备与表征

分别通过VLS和VS生长机制得到了Si3N4纳米线和纳米带.产物经X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等表征手段进行了分析.FTIR图谱表明它们在800～1100cm-1的波数范围内有一个宽的吸收带,这是Si-N键伸缩振动模式的典型吸收带.它们的室温光致发光图谱显示,在420nm左右都有一很强的发射带,表明其将在纳米光电器件中有潜在应用.另外,Si3N4纳米线发光峰与纳米带的发光相比有少许蓝移(蓝移约4nm),这可能和晶须尺寸的少许差别有关.至于纳米带的发光强度大于纳米线的原因,可能是纳米带的比表面积相对较大,有利于悬键的形成,从而导致材料结构内缺陷的浓度较大.     

孔梯度陶瓷纤维复合膜管的制备及特性

陶瓷过滤管具有孔隙率高、耐腐蚀、耐高温、机械强度高、便于清洗、使用寿命长等优点,是高温烟尘处理用的高效过滤元件.本文研制了一种具有梯度孔结构堇青石陶瓷纤维复合膜过滤元件,该过滤元件是由多孔支撑体、过渡层和分离膜层组成.其中支撑体、过渡层和分离层的气孔率分别为35～40;、50～60;和60～70;.文中主要分析了孔梯度陶瓷纤维复合膜管的材料结构和抗热震性能,同时对复合膜管进行含尘气体过滤的冷态模拟试验.对于烟气中粒径大于或等于0.1μm的颗粒,复合膜管的截留率达到99.8;以上.     

碘、氟、硅与人体健康的关系

碘、氟、硅是人体必需微量元素,它们的摄入量对人体健康起着重要作用。对碘、氟、硅的缺乏与疾病之间的关系进行了讨论,并对其治疗和防治方法作了介绍。