Polymeric thiols as enzyme activators of serum creatine phosphokinase

Several hydrophilic polymeric thiols were prepared from aminoactivated polymeric supports by reaction with N-acetylhomocysteinethiolactone. Supports include agaroses, cellulose, Glycophase™ controlled-pore glass, and Matrex™ acrylic beads. Thiol content in these polymers was 3–72 μmol SH/g dry polymer. Several were effective solid-phase activators of the sulfhydryl-dependent enzyme creatine phosphokinase at concentrations comparable to that of monomeric thiol required for enzyme activation. The kinetic activation curves for the polymeric and the monomeric (thioglucose) activators were similar, suggesting unhindered interaction of the enzyme with the polymeric activator.     

TG and DSC studies of filled porous copolymers

A complex approach including thermogravimetry, differential thermal analysis and differential scanning calorimetry was applied to study characteristics of non-filled and filled porous copolymers of divinylbenzene with styrene or some acrylic monomers: di(methacryloyloxymethyl)naphthalene, methacrylic ester of p,p’-dihydroxydiphenylpropane diglycidyl ether, and dimethacrylglycolethylene. High disperse silicas with the grafted methyl and silicon hydride groups in the surface layer were used as fillers. The kinetic parameters of thermal degradation for composites obtained were determined by different methods.     

Soluble polymers with pendant thionine groups: Synthesis and evaluation as singlet oxygen photosensitizers

Thionine ( 1 ) has been covalently bound to linear copoly(styrene-p-vinylbenzyl chloride) and to linear copoly(acrylic acid-2-ethylhexyl acrylate). The resulting polymeric dyes, purified by ultrafiltration, present quantum yields of singlet oxygen generation in dimethylformamide solution lower than their corresponding low-molecular-weight models thionine hydrochloride ( 1.HCl ) and N(3)-acetylthionine ( Ac-1 ), the decrease being more pronounced in the case of the polystyrene-dye photosensitizer. High chromophore concentrations within the volume encompassed by each macromolecule in the solution can explain this fall in efficiency. The free dyes thionine hydrochloride and its hydrolysis products thionoline ( 2 ) and thionol ( 3 ) behave as good singlet oxygen generators, with quantum yields of 0.71, 0.62, and 0.63, respectively. © 1993 John Wiley & Sons, Inc.     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

Radiation formation of polymeric nanogels

An alternative method of synthesis of polymeric nanogels is proposed, based not on polymerization, but on intramolecular crosslinking of polymer chains, initiated by pulse irradiation in dilute aqueous solutions. Kinetic data show that for many water-soluble polymers irradiation under these conditions result in intramolecular crosslinking. Preliminary product studies on poly(vinyl alcohol) indicate that in fact internally crosslinked macromolecules can be obtained by this technique.     

Chemical Modification of Silica Gels

Highly porous pure and polyethyleneglycol (PEG)-doped silica gels have been prepared from tetraethyl orthosilicate (TEOS) in ethanol using NH₄OH base-catalysis. Addition of PEG to the SiO₂-system increases the average particle size and most frequent pore diameter of the resultant gels while their total surface area decreases. The viscosity of the sol increases with PEG concentration and passes through a maximum with increasing molecular weight at PEG 200. Results obtained indicate a definite interaction of the polymer with SiO₂ and that this interaction is not as a result of direct formation of Si– O– C linkage, but is more likely to be due to hydrogen bonding between the hydrated PEG and the Si– O– Si network. Structure-process correlations are considered.     

Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.     

Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.     

A deuteron NMR study of axial motion and side chain conformation in the mesophase of discotic liquid crystal main-chain polymers

Pulsed deuteron NMR spectroscopy has been used to examine the axial motion and the side-chain conformation in both oriented and unoriented mesophases of discotic liquid crystal main-chain polymers based on pentyloxy or heptyloxy substituted triphenylenes. Lineshape simulations show that the rotational motion of the triphenylene rings about the column axes can be described by an inhomogeneous distribution of reorientation angles around 45°. However, only about 60% of the discs are involved in such large amplitude motions; the remaining 40% have reorientation angles below 10°. This illustrates the severe restrictions imposed on the rotation of the discs by the interlinkage of the columns via the alkylene spacers. Furthermore, the simulations demonstrate that, at the -carbon, the side chains show very little fast internal motion, but have a relatively complex conformation involving a disorder which does not change on the microsecond timescale. Since such a disorder is not present in the corresponding monomeric samples it is ascribed to the presence of the spacers. These results are also consistent with the presence of large sterical hindrances between the first side chains segments of adjacent discs, and they indicate a correlated reorientation of the discotic units within a column.