互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Thermal decomposition study on nickel(ii) complexes of 1,2-(diimino-4’-antipyrinyl)ethane with varying counter ions

The phenomenological, kinetic and mechanistic aspects of the nitrate, chloride, bromide and iodide complexes of nickel(II) with1,2-(diimino-4’-antipyrinyl)ethane (GA) have been studied by TG and DTG techniques. The kinetic parameters like activation energy, pre-exponential factor and entropy of activation were computed. The rate controlling process in all stages of decomposition is random nucleation with one nucleus on each particle (Mampel model).     

Ion Association and Hydration in Aqueous Solutions of Nickel(II) and Cobalt(II) Sulfate

Aqueous solutions of nickel(II) and cobalt(II) sulfate have been investigated at 25 ^∘C by dielectric relaxation spectroscopy (DRS) over a wide range of frequencies (0.2 ≤ ν (GHz) ≤ 89) and salt concentrations (0.025 ≤ c(mol-L⁻¹) ≤ 1.4). The spectra indicate, as for MgSO₄(aq) studied previously, the simultaneous presence of double solvent-separated, solvent-shared and contact ion pairs in both NiSO₄(aq) and CoSO₄(aq). The stepwise formation constants for each ion-pair type and the overall association constant, obtained from the data are in good agreement with ultrasonic relaxation and other estimates. The DR spectra at higher concentrations (c ≥ 0.5 mol-L⁻¹) suggest the existence of a nonlinear triple ion M₂SO₄²⁺(aq). Consistent with the very strong hydration of the salts, which have ‘effective’ hydration numbers approaching 27 at infinite dilution, there are no significant differences in any of the relaxation or thermodynamic parameters for NiSO₄(aq) and CoSO₄(aq), except that the triple ion appears to be somewhat more stable for the latter.     

Rigid aromatic fractal polyamides

The preparation of rigid aromatic, highly branched polyamides is described. Owing to the method of preparation and the chosen ratio of difunctional to trifunctional monomers, these entities are highly porous and not dendrimeric in nature. They better conform with the fractal model and are therefore called fractal polyamides (FPs). The effects of variations in the polymerization procedure, in total monomer concentration, in the ratio of amine to carboxyl groups and in the duration of the polycondensation reaction are investigated. Some characterization was performed and the results are presented and briefly discussed.     

Thermochemische Untersuchungen zu den Systemen Ti/Ni und Ti/Co

Thermochemical Investigations of the Systems Ti/Ni and Ti/Co By treatment of solid Ni or Co with a H₂/TiCl₄-gas mixture at sufficient high temperature (T ≥ 900°C) the intermetallic phases TiNi₃ and TiCo₃, resp., are formed. The conversion grade depends on the H₂/TiCl₄-ratio. From the experimentally determined conversion grades and the known thermodynamic data of all other species existing in equilibrium the free enthalpies and the heats of formation of TiN₃ and TiCo₃ have been calculated (TiNi₃: ΔH(298) = ?133.3 ± 6 kJ/mol; TiCo₃: ΔH(298) = ?104.7 ± 6 kJ/mol).     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Polarization Dependence of a Hydrophobized Electrode for Electrosynthesis of a Soluble Product

An equation for a polarization curve of a hydrophobized electrode is proposed for electrosynthesis of a soluble electroactive product in an inner-kinetic mode. The equation contains the concentration of the target product (TP) in an explicit form. The shape of the curve depends on the biquadratic root of the TP concentration and the square root of the ratio between exchange currents of the side and target reactions.     

在吡啶溶剂中氯化镍催化的溴代芳烃自身偶联反应

Pyridine was used as a solvent for homocoupling of aryl bromides catalyzed by nickel chloride/triarylphosphinein the presence of zinc and recycled easily.Triphenylphosphine was the best ligand for nickel in this coupling reac-tion.     

Influence of conjugated nitrogenous bases on the spectra and structure of mixed-ligand nickel(II) chelates containing β-diones

The infrared and electronic excitation spectra of a series of new nickel(II) chelates containing an-diimine (or nitrogenous base, enR) and the anion of a-dione (1,3-ketoenol or 1,3-ketoester,H) were obtained in the solid state and in solution. The composition and the overall structure of the new chelates in the solid state depends on ligand concentration, the substituents within the-dionato moiety and the counterion present. The IR and electronic excitation spectra of [Ni(enR)₂ ]NO₃ and [Ni(enR)(O₂NO)] indicate, in conjunction with other physicochemical measurements, bidentate coordination of the ligands, while the spectral shifts reveal replacement of the (O,O)nitrato group by basic solvents. The existence of the nickel(II) in an octahedral environment is confirmed by an X-ray structure analysis of [Ni(dpamH)₂acac]NO₃ · CH₃OH (monoclinic, space groupP2_l/n, a=17.296(1),b=7.462(1),c=21.604(3) å,=95.65(1),Z=4, R=0.0534,Rw=0.0600), where dpamH denotes the 2,2-dipyridylamine.     

超声波处理对球形β-Ni(OH)2结构及电化学性能的影响

A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results showed that UST was an effective method to improve the electrochemical performance of β-Ni（OH）2 such as specific discharge capacity, discharge potential, electrochemical reversibility and oxygen evolution over-potential. The results of electrochemical impedance spectroscopy, powder X-ray diffraction and particle size distribution indicated that the improvement of the performance of β-Ni（OH）2 through UST was attributed to the reduction of the charge-transfer resistance （Rt） and the diffusion impedance （Zw）, which resulted from the decrease of the crystallite and particle size and the increase of interlayer spacing. Diffusion coefficient of proton DH of ultrasonic treated β-Ni（OH）2 gained by CV tests was 1.13 × 10^-11 cm^2/s, and the average discharge specific capacity of ultrasonic treated β-Ni（OH）2 electrode was 301 mAh/g.