Hydrophobic/hydrophilic P(VDF‐TrFE)/PHEA polymer blend membranes

Polymer blend membranes have been obtained consisting of a hydrophilic and a hydrophobic polymers distributed in co‐continuous phases. In order to obtain stable membranes in aqueous environments, the hydrophilic phase is formed by a poly(hydrohyethyl acrylate), PHEA, network while the hydrophobic phase is formed by poly(vinylidene fluoride‐co‐trifluoroethylene) P(VDF‐TrFE). To obtain the composites, in a first stage, P(VDF‐TrFE) is blended with poly(ethylene oxyde) (PEO), the latter used as sacrificial porogen. P(VDF‐TrFE)/PEO blend membranes were prepared by solvent casting at 70°C followed by cooling to room temperature. Then PEO is removed from the membrane by immersion in water obtaining a P(VDF‐TrFE) porous membrane. After removing of the PEO polymer, a P(VDF‐TrFE) membrane results in which pores are collapsed. Nevertheless the pores reopen when a mixture of hydroxethyl acrylate (HEA) monomer, ethyleneglycol dimethacrylate (as crosslinker) and ethanol (as diluent) is absorbed in the membrane and subsequent polymerization yields hybrid hydrophilic/hydrophobic membranes with controlled porosity. The membranes are thus suitable for lithium‐ion battery separator membranes and/or biostable supports for cell culture in biomedical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 672–679     

Surface influence on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel

Low-field nuclear magnetic resonance techniques are employed to extract information about the effects introduced by the interaction with the surface on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel. The molecules under study were water, cyclohexane, and hexane. They were chosen due to their different interaction strength with the carbonaceous matrix. Frequency dependent longitudinal relaxation measurements, using the fast field cycling technique, allowed extraction of the fractal dimension of the carbon xerogel surface. It was observed that the measured value is influenced by the molecule affinity to the surface. Diffusion measurements, using the pulse field gradient technique, have revealed that the stronger interaction with the surface of cyclohexane and hexane molecules leads to an increased diffusive tortuosity, as compared with water.     

Influence of Carbon Multiple Treatments on the Photoelectrical Properties of Porous Glasses

We have studied the influence of multiple carbon treatments on the properties of silica porous glasses. Each step of each carbon treatment started with filling the voids of porous glass with carbon. During the following anneal carbon interacted with the walls of the voids. It was shown that low dimensional silicon clusters were formed inside the voids as a result of this reaction. In the experiments the photoluminescence spectra and conductivity of carbon-processed specimens were measured. The size-distribution of voids in porous glasses was calculated from absorption—desorption isotherms. An original technique was proposed that allowed to obtain the size-distribution of silicon clusters from the positions of peaks in the photoluminescence spectra. Correlation between the photoluminescence intensity and the sizes of pores was revealed. The observed oscillations in the shapes of the photoluminescence spectra in subsequent cycles of carbon treatment are explained by changes of the number of clusters corresponding to definite peaks in the size distribution spectra.     

Pd nanoparticles supported on amphiphilic porous organic polymer as an efficient catalyst for aqueous hydrodechlorination and Suzuki-Miyaura coupling reactions

Developing efficient and recyclable heterogeneous catalysts for organic reactions in water is important for the sustainable development of chemical industry. In this work, Pd nanoparticles supported on DABCO-functionalized porous organic polymer was successfully prepared through an easy copolymerization and successive immobilization method. Characterization results indicated that the prepared catalyst featured big surface area, hierarchical porous structure, and excellent surface amphiphilicity. We demonstrated the use of this amphiphilic catalyst in two case reactions, i.e. the aqueous hydrodechlorination and Suzuki-Miyaura coupling reactions. Under mild reaction conditions, the catalyst showed high catalytic activities for the two reactions. In addition, the catalyst could be easily recovered and reused for several times. Also, no obvious Pd leaching and aggregation of Pd nanoparticles occurred up during the consecutive reactions.     

Keller–Osserman estimates and removability result for the anisotropic porous medium equation with gradient absorption term

We study “large” nonnegative solutions for a class of quasilinear equations model of which is We give a sufficient condition on the exponents and for the removability of isolated singularities.     

An Ion-Exchangeable MOF with Reversible Dehydration and Dynamic Structural Behavior (NH4)2[Zn2(O3PCH2CH2COO)2]⋅5 H2O (BIRM-1)

(NH₄)₂[Zn₂(O₃PCH₂CH₂COO)₂]⋅5 H₂O (BIRM-1) is a new metal phosphonate material, synthesized through a simple hydrothermal reaction between zinc nitrate and 3-phosphonopropionic acid, using urea and tetraethylammonium bromide as the reaction medium. In common with other metal–organic framework materials, BIRM-1 has a large three-dimensional porous structure providing potential access to a high internal surface area. Unlike most others, it has the advantage of containing ammonium cations within the pores and has the ability to undergo cation exchange. Additionally, BIRM-1 also exhibits a reversible dehydration behavior involving an amorphization-recrystallization cycle. The ability to undergo ion exchange and dynamic structural behavior are of interest in their own right, but also increase the range of potential applications for this material. Here the crystal structure of this new metal phosphonate and its ion exchange behavior with K⁺ as an exemplar are studied in detail, and its unusual structure-reviving property reported.     

Porous Molybdenum Carbide Nanostructures Synthesized on Carbon Cloth by CVD for Efficient Hydrogen Production

Molybdenum carbide (Mo₂C) is a promising noble-metal-free electrocatalyst for the hydrogen evolution reaction (HER), due to its structural and electronic merits, such as high conductivity, metallic band states and wide pH applicability. Here, a simple CVD process was developed for synthesis of a Mo₂C on carbon cloth (Mo₂C@CC) electrode with carbon cloth as carbon source and MoO₃ as the Mo precursor. XRD, Raman, XPS and SEM results of Mo₂C@CC with different amounts of MoO₃ and growth temperatures suggested a two-step synthetic mechanism, and porous Mo₂C nanostructures were obtained on carbon cloth with 50 mg MoO₃ at 850 °C (Mo₂C-850(50)). With the merits of unique porous nanostructures, a low overpotential of 72 mV at current density of 10 mA cm⁻² and a small Tafel slope of 52.8 mV dec⁻¹ was achieved for Mo₂C-850(50) in 1.0 m KOH. The dual role of carbon cloth as electrode and carbon source resulted into intimate adhesion of Mo₂C on carbon cloth, offering fast electron transfer at the interface. Cyclic voltammetry measurements for 5000 cycles revealed that Mo₂C@CC had excellent electrochemical stability. This work provides a novel strategy for synthesizing Mo₂C and other efficient carbide electrocatalysts for HER and other applications, such as supercapacitors and lithium-ion batteries.     

A higher resolution edge‐based finite volume method for the simulation of the oil–water displacement in heterogeneous and anisotropic porous media using a modified IMPES method

In this article, we present a higher‐order finite volume method with a ‘Modified Implicit Pressure Explicit Saturation’ (MIMPES) formulation to model the 2D incompressible and immiscible two‐phase flow of oil and water in heterogeneous and anisotropic porous media. We used a median‐dual vertex‐centered finite volume method with an edge‐based data structure to discretize both, the elliptic pressure and the hyperbolic saturation equations. In the classical IMPES approach, first, the pressure equation is solved implicitly from an initial saturation distribution; then, the velocity field is computed explicitly from the pressure field, and finally, the saturation equation is solved explicitly. This saturation field is then used to re‐compute the pressure field, and the process follows until the end of the simulation is reached. Because of the explicit solution of the saturation equation, severe time restrictions are imposed on the simulation. In order to circumvent this problem, an edge‐based implementation of the MIMPES method of Hurtado and co‐workers was developed. In the MIMPES approach, the pressure equation is solved, and the velocity field is computed less frequently than the saturation field, using the fact that, usually, the velocity field varies slowly throughout the simulation. The solution of the pressure equation is performed using a modification of Crumpton's two‐step approach, which was designed to handle material discontinuity properly. The saturation equation is solved explicitly using an edge‐based implementation of a modified second‐order monotonic upstream scheme for conservation laws type method. Some examples are presented in order to validate the proposed formulation. Our results match quite well with others found in literature. Copyright © 2016 John Wiley & Sons, Ltd.     

Formylated polystyrene for the fabrication of pore selective aldehyde group functionalized honeycomb patterned porous polystyrene films

Formylated polystyrene (PS‐CHO) was synthesized by chemical modification of polystyrene (PS) for the fabrication of honeycomb patterned (HCP) porous PS films with aldehyde group functionalized pores via breath figure method under humid conditions. The incorporation of hydrophilic aldehyde group affected the hydrophobicity of PS solution and assisted the self‐assembly of PS‐CHO toward pore. The presence of aldehyde groups in the films were proved by the post treatment with Tollens's reagent, which results in silver decoration at pores. The morphology of the films before and after silver decoration was studied by scanning electron microscopy analysis. The pore selectively self‐assembled aldehyde groups in the patterned porous films can have many applications as a reactive substrate in biomaterials and chemical moieties adhesion. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1181–1192     

Light Hydrocarbon Separations Using Porous Organic Framework Materials

Light hydrocarbons (C₁–C₃) are used as basic energy feedstocks and as commodity organic compounds for the production of many industrially necessary chemicals. Due to the nature of the raw materials and production processes, light hydrocarbons are generated as mixtures, but the high-purity single-component products are of vital importance to the petrochemical industry. Consequently, the separation of these C₁–C₃ products is a crucial industrial procedure that comprises a significant share of the total global energy consumption per year. As a complement to traditional separation methods (distillation, partial hydrogenation, etc.), adsorptive separations using porous solids have received widespread attention due to their lower energy costs and higher efficiency. Extensive research has been devoted to the use of porous materials such as zeolites and metal-organic frameworks (MOFs) as solid adsorbents for these key separations, owing to the high porosity, tunable pore structures, and unsaturated metal sites present in these materials. Recently, porous organic framework (POF) materials composed of organic building blocks linked by covalent bonds have also shown excellent properties in light hydrocarbon adsorption and separation, sparking interest in the use of these materials as adsorbents in separation processes. This Minireview summarizes the recent advances in the use of POFs for light hydrocarbon separations, including the separation of mixtures of methane/ethane, methane/propane, ethylene/ethane, acetylene/ethylene, and propylene/propane, while highlighting the relationships between the structural features of these materials and their separation performances. Finally, the difficulties, challenges, and opportunities associated with leveraging POFs for light hydrocarbon separations are discussed to conclude the review.