互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Growth of silicon thin film by LPE on porous silicon bilayers

The fabrication of solar cells based on the transfer of a thin silicon film on a foreign substrate is an attractive way to realise cheap and efficient photovoltaic devices. The aim of this work is to realise a thin mono-crystalline silicon film on a double porous silicon layer in order to detach and transfer it on mullite. The first step is the fabrication of a double porous silicon layer by electrochemical anodisation using two different current densities. The low current leads to a low porosity layer and during annealing, the recrystallisation of this layer allows epitaxial growth. The second current leads to a high porosity which permits the transfer on to a low cost substrate. Liquid Phase Epitaxy (LPE) performed with indium (or In+Ga) in the temperature range of 950–1050°C leads to almost homogeneous layers. Growth rate is about 0.35 μm min⁻¹. Crystallinity of the grown epilayer is similar on porous silicon and on single crystal silicon. In this paper, we focus on the realisation of porous silicon sacrificial layer and subsequent LPE growth. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of tetrahydrofuran on the conductance and ion-pairing of hydrogen chloride in wet and dry methanol mixtures

The molar conductance of dilute solutions of HCl in wet (68.5% methanol + 31.5% tetrahydrofurane mixtures at 25°C have been measured. The data were analyzed using the Fuoss-Hsia equation to calculate the infinite dilution molar conductances and association constants. The trend of the limiting conductances in these mixtures as a function of the water content shows, once more, the peculiar minimum due to the anomalous proton conductance mechanism. From these data the limiting molar conductance in the anhydrous binary solvent system was evaluated. The percentage excess proton mobility with respect to potassium ion has also been determined. All these data are compared to those found in a binary isodielectric methanol mixture containing as cosolvent 1,4-dioxane. This comparison shows that proton mobilities are very similar in both solvent mixtures. The dielectric constants, refractive indices, viscosities and densities of the methanol-tetrahydrofuran mixtures in the whole mole fraction range have been measured and are reported. An analysis of the excess molar volumes and viscosities shows a slight deviation of this system from ideality.     

混合价化合物的研究(Ⅱ)─—电化学及现场光谱电化学方法研究非质子介质中Dawson结构杂多阴离子[HAs_2Mo_(18)O_(62)]~(n-)的电还原性质

以电化学和现场紫外－可见－近红外及现场FTIR光谱电化学方法对Dawson结构杂多阴离子［HAS2Mo18O62］5－在非质子介质（CH3CN）中的电还原过程进行了研究．结果表明，该杂多阴离子在非质子介质中经历4步单电子还原反应，所产生的杂多蓝阴离子在近红外区出现宽广的价间电荷转移吸收带，而红外区Mo＝O端键及Mo—O—Mo桥键的特征吸收峰在还原后均有不同程度的红移．     

Computer Simulation of the Structure of Porous Electrodes with an Immobilized Enzyme and Nanosized Support Particles

The efficiency of the operation of a porous electrode with an immobilized enzyme is defined, in particular, by a lucky structure of its active layer, which can contain nanosized particles of the support. The composites of such a kind are prepared with the aid of methods of colloidal chemistry. The aim of this particular investigation is to perform a computer simulation of processes of coagulation of particles of the support and their possible heterocoagulation with molecules of the enzyme. Algorithms of the formation of nanocomposite structures in solution are suggested. Calculations show that the concentration of the enzyme molecules in the nanocomposite structures cannot exceed a certain critical value. On the other hand, at a fixed value of the concentration of the enzyme molecules, the concentration of the support particles must not fall below a certain threshold quantity, which provides for the passing of current through the active layer. In order for all the enzyme molecules, rather than for a fraction of these, in the composite to take part in the process of bioelectrocatalysis, the concentration of support particles must be increased even higher, to an optimum value.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 738–747.Original Russian Text Copyright © 2005 by Chirkov, Rostokin.     

多孔二氧化硅中Gd3+ → Eu3+的能量传递

通过水热反应法，获得了单掺和双掺Eu³⁺，Gd³⁺的多孔二氧化硅组装体，研究了掺杂体系的光谱特性，观察到Gd³⁺ → Eu³⁺的能量传递。分析了能量传递过程，探讨了在多孔二氧化硅中Gd³⁺→Eu³⁺的能量传递的机理，其机理主要为电偶极-电偶极相互作用。     

硅基多孔氧化铝模板非水电沉积CdS纳米线的研究

纳米材料,包括尺寸为纳米量级的超细微粒?线?薄膜?量子阱和超晶格等引起了人们广泛的重视 [1,2] ?其中 , 半导体纳米微粒和由其构成的纳米固体结构开辟了材料科学研究的新领域?硫化镉 (CdS) 作为一种重要的Ⅱ - Ⅵ族无机半导体材料 , 具有独特的光电性质 , 在光电化学电池和多相光催化反应中都有广泛应用?近年来 , 已有大量关于合成 CdS 纳米结构的文献报导 [3～12] , 所采用的方法如反胶束法?单分子膜法?自组装法以及电化学沉积法等 , 其中非水电解与模板技术相结合的制备方法引起了人们高度的重视并且被广泛的采用?自从 Baranski 等在上…     

Conductance study of ammonium complexes with several crown ethers and cryptands in nitrobenzene,acetonitrile and dimethylformamide solutions

The formation of ammonium complexes with several crown ethers and cryptands in nitrobenzene, acetonitrile and dimethylformamide solutions was investigated by conductometry at 25°C. Stability constants of the resulting 1:1 complexes sere determined from the molar conductance-mole ratio data and found to vary in the order DC18C6>18C6>DB30C10>DB21C7>DB24C8>DB18C6>15C5>B15C5>12C4, in the case of crown complexes, and in the order C222>C221>C211>C22>C21 for the ammonium cryptates. The stabilities of the complexes varied inversely with the Gutmann donicity of the solvents. Influences of the number of members in the macrocycle, nature of the substituents in the polyether ring, cavity size and dimensionality, conformations of the free and complexed ligands and number of N⁺–H bonds available for hydrogen bonding are discussed.     

Novel reaction systems for the synthesis of O-glucosides by enzymatic reverse hydrolysis

Our studies are presented to replace alcohols as solvents in reverse hydrolytic reactions catalyzed by immobilized β-glucosidase to synthesize O-substituted β-d-glucopyranosides in preparative-scale. We found that 1,2-diacetoxyethane is a suitable solvent and O-alkyl or aryl β-d-glucosides were synthesized in moderate yields (after isolation 12-19%). In these reactions proportion of glucose and glucosyl acceptor hydroxy compounds was 1:20. We suggest that 1,2-diacetoxyethane can be useful not only for alcohols but for other glucosyl donor compounds unsuitable for the role of solvent (e.g., phenols) in the synthesis of O-β-d-glucosides by reverse hydrolysis.