Modern Inorganic Aerogels

Essentially, the term aerogel describes a special geometric structure of matter. It is neither limited to any material nor to any synthesis procedure. Hence, the possible variety of materials and therefore the multitude of their applications are almost unbounded. In fact, the same applies for nanoparticles. These are also just defined by their geometrical properties. In the past few decades nano‐sized materials have been intensively studied and possible applications appeared in nearly all areas of natural sciences. To date a large variety of metal, semiconductor, oxide, and other nanoparticles are available from colloidal synthesis. However, for many applications of these materials an assembly into macroscopic structures is needed. Here we present a comprehensive picture of the developments that enabled the fusion of the colloidal nanoparticle and the aerogel world. This became possible by the controlled destabilization of pre‐formed nanoparticles, which leads to their assembly into three‐dimensional macroscopic networks. This revolutionary approach makes it possible to use precisely controlled nanoparticles as building blocks for macroscopic porous structures with programmable properties.     

Aza-Michael reaction: selective mono- versus bis-addition under environmentally-friendly conditions

Aza-Michael reactions between primary amines and methyl propenoate have been investigated under environmentally-friendly solventless heterogeneous catalysis in order to obtain the mono- or the bis-adduct. The reaction conditions can be altered so as to maximise the yields of the required product with high selectivity.     

高比能高功率全石墨烯锂离子电容器

石墨烯由于拥有超高比表面积和超高电导率而被作为电化学电容器材料广泛研究.本文采用树脂为碳源，通过一种方便快捷的树脂交换法制备一种具有高比表面积的多级孔三维石墨烯（3DG）.经过此种方法的催化、造孔、热处理等主要工艺步骤后，可显著增加石墨烯材料的小、介孔数量，从而提高材料的电化学性能.通过BET测试表明，3DG的比表面积可达2400 m²/g，孔体积达到2.0 cm³/g.以3DG作为正负极材料制备高比能量高功率型锂离子电容器（3DG-LIC），可使3DG-LIC的工作电压从传统超级电容器的2.5 V扩展到4.0 V，能量密度也从20 Wh/kg提高到105 Wh/kg.另外，相同的化学和微观结构能很好地平衡正负极的容量及速率，使高比能量高功率的3DG-LIC具有更宽阔的应用领域.     

A Carbocationic Triarylmethane-Based Porous Covalent Organic Network

A thermally stable carbocationic covalent organic network (CON), named RIO-70 was prepared from pararosaniline hydrochloride, an inexpensive dye, and triformylphloroglucinol in solvothermal conditions. This nanoporous organic material has shown a specific surface area of 990 m² g⁻¹ and pore size of 10.3 Å. The material has CO₂ uptake of 2.14 mmol g⁻¹ (0.5 bar), 2.7 mmol g⁻¹ (1 bar), and 6.8 mmol g⁻¹ (20 bar), the latter corresponding to 3 CO₂ molecules adsorbed per pore per sheet. It is shown to be a semiconductor, with electrical conductivity (σ) of 3.17×10⁻⁷ S cm⁻¹, which increases to 5.26×10⁻⁴ S cm⁻¹ upon exposure to I₂ vapor. DFT calculations using periodic conditions support the findings.     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes: Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile (PAN) and an additive of polyvinylpyrrolidone (PVP), which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm² and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

Influence of aspect ratio and anisotropy distribution in ordered CoNi nanowire arrays

The size effects on magnetic properties of nanowires arrays were studied varying the nanowires diameter and maintaining the same periodicity among them, for two different nominal compositions of Co and Ni in the alloy form. The competition among magnetocrystalline and shape anisotropies changes drastically from smallest to biggest diameters altering the easy axis direction. In the case of 75% of Co in alloy, experimental values of the effective anisotropy constant (K_eff) vary from positive to negative depending on the diameter, which means a reversal of the easy axis direction. For 50% of Co the shape anisotropy dominates over the magnetocrystalline for all studied diameters.     

Hydrophobic/hydrophilic P(VDF‐TrFE)/PHEA polymer blend membranes

Polymer blend membranes have been obtained consisting of a hydrophilic and a hydrophobic polymers distributed in co‐continuous phases. In order to obtain stable membranes in aqueous environments, the hydrophilic phase is formed by a poly(hydrohyethyl acrylate), PHEA, network while the hydrophobic phase is formed by poly(vinylidene fluoride‐co‐trifluoroethylene) P(VDF‐TrFE). To obtain the composites, in a first stage, P(VDF‐TrFE) is blended with poly(ethylene oxyde) (PEO), the latter used as sacrificial porogen. P(VDF‐TrFE)/PEO blend membranes were prepared by solvent casting at 70°C followed by cooling to room temperature. Then PEO is removed from the membrane by immersion in water obtaining a P(VDF‐TrFE) porous membrane. After removing of the PEO polymer, a P(VDF‐TrFE) membrane results in which pores are collapsed. Nevertheless the pores reopen when a mixture of hydroxethyl acrylate (HEA) monomer, ethyleneglycol dimethacrylate (as crosslinker) and ethanol (as diluent) is absorbed in the membrane and subsequent polymerization yields hybrid hydrophilic/hydrophobic membranes with controlled porosity. The membranes are thus suitable for lithium‐ion battery separator membranes and/or biostable supports for cell culture in biomedical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 672–679     

Surface influence on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel

Low-field nuclear magnetic resonance techniques are employed to extract information about the effects introduced by the interaction with the surface on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel. The molecules under study were water, cyclohexane, and hexane. They were chosen due to their different interaction strength with the carbonaceous matrix. Frequency dependent longitudinal relaxation measurements, using the fast field cycling technique, allowed extraction of the fractal dimension of the carbon xerogel surface. It was observed that the measured value is influenced by the molecule affinity to the surface. Diffusion measurements, using the pulse field gradient technique, have revealed that the stronger interaction with the surface of cyclohexane and hexane molecules leads to an increased diffusive tortuosity, as compared with water.