Towards the limit of atropochiral stability: H-MIOP, an N-heterocyclic carbene precursor and cationic analogue of the H-MOP ligand

The configurational stability of biaryl motifs is addressed for the 1-naphthyl-N-benzimidazolyl motif substituted by a single diphenylphosphinyl group at the 2-position. The atropoenantiomers of the N-methylated cation H-MIOP, a less sterically locked analogue of the neutral H-MOP ligand, were resolved by enantiospecific cleavage of the N(2)C-P bond of the resolved enantiomers of BIMIONAP. The latter were obtained by enantiospecific N-methylation of the previously resolved enantiomers of neutral BIMINAP. PdCl(2) complexes of the P,C-chelating N-heterocyclic carbene (NHC)-phosphine ligands derived from (R)- and (S)-H-MIOP were prepared by two enantiospecific routes: by N(2)C-P bond cleavage from the (R)- and (S)-BIMIONAP-PdCl(2) complexes, or by simultaneous coordination of the P and C atoms of the in situ generated free NHC-phosphine. The enantiomerization pathways of H-MOP, H-MIOP, and corresponding NHC-phosphine have been investigated at the B3PW91/6-31G(d,p) level of theory. The calculated enantiomerization barriers of H-MOP and H-MIOP in acetonitrile are equal to 176.0 and 146.4 kJ mol(-1), respectively, and are mainly determined by the distortion of the naphthalene and/or benzimidazole motifs in the transition state. Beyond the stability of their optical rotation at room temperature, the respective calculated Oki's racemization temperatures of 334 and 225 °C allowed us to consider both ligands as configurationally stable.     

Tuning main group redox chemistry through steric loading: subvalent Group 13 metal complexes of carbazolyl ligands

The ability of substituted carbazol‐9‐yl systems to ligate in σ fashion through the amido N‐donor, or to adopt alternative coordination modes through the π system of the central five‐membered ring, can be tuned by systematic variation in the steric demands of substituents in the 1‐ and 8‐positions. The differing affinities of the two modes of coordination for hard and soft metal centres can be shown to influence not only cation selectivity, but also the redox properties of the metal centre. Thus, the highly sterically sterically demanding 1,3,6,8‐tetra‐tert‐butylcarbazolyl ligand can be used to generate the structurally characterised amido‐indium(I) complex, [{(tBu₄carb)In}_n], (together with its isostructural thallium counterpart) in which the metal centre interacts with the central pyrrolyl ring in η³ fashion [d(In? N)=2.679(3) Å; d(In? C)=2.819(3), 2.899(3) Å]. By contrast, the smaller 3,6‐di‐tert‐butylcarbazolyl system is less able to restrict the metal centre from binding at the anionic nitrogen donor in the plane of the carbazolyl ligand (i.e. in σ fashion). Analogous chemistry with In^I precursors therefore leads to disproportionation to the much harder In^II [and In⁰], and the formation of the mixed‐valence product, [In₂{In₂(tBu₂carb)₆}], a homoleptic molecular [In₄(NR₂)₆] system. This chemistry reveals a flexibility of ligation for carbazolyl systems that contrasts markedly with that of the similarly sterically encumbered terphenyl ligand family.     

4,5-Bis(dialkylamino)-substituted imidazolium systems: facile access to N-heterocyclic carbenes with self-umpolung option

The first synthesis of 4,5-bis-(dimethylamino)-substituted imidazolium compounds was developed, which is based on the reaction of a 1,2-diamino-1,2-bis(phosphonio)ethene with lithiated formamidines. This represents the first application of this class of ethene derivatives for the preparation of heterocycles. These N-heterocyclic carbene (NHC) precursors show a remarkably reduced basicity and nucleophilicity of their NMe2 groups, which is due to the strong anomeric interactions of the latter with the imidazolium core. According to DFT calculations, these NHCs are capable of self-umpolung if sufficiently strong acceptor substituents are introduced at the carbene center. To test the self-umpolung capabilities of the NHCs, various substituents were attached to the carbene center and the obtained compounds were characterized by single-crystal X-ray analysis as well as quantum chemical computations. Strong acceptor substituents are required to induce self-umpolung, such as in the phosphonio-substituted derivative, for which partial self-umpolung was found. The N,N′-bis(4-dimethylaminophenyl)-substituted imidazolium compound represents a special case, as it incorporates as much as three two-step redox systems within the NHC framework. This will probably result in a high electronic flexibility of the corresponding nucleophilic carbenes, especially when they serve as ligands in transition metal complexes.     

镍氢电池正极大电流充放电性能及最佳配方

采用化学共沉淀法制备了镍铝和钴铝2种层状氢氧化物[ Ni4Al(OH)10]OH和[Co4Al(OH)10]NO3.将前者作为电极活性材料,后者及石墨作为正极导电添加剂,通过单纯形重心设计研究了正极中3种物质的最佳配比,使其大电流充放电性能得到有效地提高.结果表明,电极的性能与电极配方密切相关.当[ Ni4Al(OH)...     

ZrO2-SiO2复合物表面酸性的调控及催化四氢呋喃聚合性能研究

采用醇-水溶液加热法制备了复合均匀的ZrO2-SiO2复合氧化物,通过调整复合物中ZrO2含量及焙烧温度对ZrO2-SiO2复合氧化物表面酸量及酸类型进行精细调控,并将其应用于催化四氢呋喃(THF)开环聚合反应.结果表明,当ZrO2含量小于30 mol%时,随着ZrO2含量的增加,复合物总酸量显著增加,且B酸与L酸酸量...     

Synthesis of 3,5-Dichloro-4-(1,1,2,2-tetrafluoroethoxy)phenyl Containing 1,2,3-Thiadiazole Derivatives via Ugi Reaction and Their Biological Activities

A series of novel 3,5‐dichloro‐4‐(1,1,2,2‐tetrafluoroethoxy)phenyl containing 4‐methyl‐1,2,3‐thiadiazole derivatives were designed and synthesized via Ugi reaction. Their structures were confirmed by IR, ¹H NMR, ¹³C NMR and high‐resolution mass spectroscopy. The preliminary bioassay results indicated that some title compounds had good fungicide activity at 50 µg/mL; most of the compounds presented a certain degree of direct inhibition activity, good inactivation and curative activity against tobacco mosaic virus at 500 µg/mL and 100 µg/mL; some compounds showed good larvicidal activity against Plutella xylostella L. at 200 µg/mL and excellent larvicidal activities against Culex pipiens pallens at 2 µg/mL.     

从原子到大分子体系的计算机模拟——计算化学50年

本文综述并修订了从20世纪50年代末至今,我们在计算化学领域所做的一些有意义的工作。序言部分把我们的工作置于当代科学的背景之下。然后我们以一种经典的基准测试体系——一种新的单粒子表象（即替代传统的原子和分子自旋轨道的化学自旋轨道）所构建的氢分子（H2）波函数——作为开始。用Hartree-Fock-Heitler-Lo...     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.