从结构电算谈设计概念

使用计算机进行结构设计虽然能大大减轻计算工作量，但不能取代人的设计概念，只有在设计人员具备较全面的设计概念；有一定设计经验；同时深入了解程度的情况下，才能确保工程设计的质量。     

管肋式辐射器排热特性的数值分析与优化设计

为得到按单面辐射方式布置的管肋式空间辐射器的排热特性，建立了相应的数学模型．采用数值模拟方法分析了管内流体温度、肋片几何尺寸和等效热沉温度对辐射器排热特性的影响，得到了不同参数值下辐射器单位面积排热量以及特定参数范围内的辐射器肋片最佳宽度和肋片效率．数值模拟结果对辐射器的工程结构设计以及空间站热管理方案的优化分析具有一定的参考价值．     

完备图分拆为带一条弦的(2k-1)-长圈

本文给出了构造G-设计的一个统一方法及当v≡1(mod 4k)时的C_(2k-1)~((r))-GD(v)的存在性,其中C_(10)~((r)),1≤r≤k-2表示带一条弦的2k-1长圈,r表示弦两个端点间的顶点个数。     

Effect of the pore surface modification of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes

We have investigated the effect of the surface state and surface treatment of the pores of an inorganic substrate on the plasma‐grafting behavior of pore‐filling‐type organic/inorganic composite membranes. Shirasu porous glass (SPG) was used as the inorganic substrate, and methyl acrylate was used as the grafting monomer. The grafting rate increased as the density of silanol on the SPG substrate increased. This result suggests that radicals are generated mainly at the silanol groups on the pore surface by plasma irradiation. The SPG substrates were treated with silane coupling agents used to control the mass of organic material bonded to the pore surface. The thickness of the grafted layer became thinner as the mass of organic material bonded to the pore surface of SPG increased. This decrease in the thickness of the grafted layer could be explained by the decrease in the penetration depth of vacuum ultraviolet rays contained in plasma having a wavelength of less than 160 nm that generated radicals in the pores of the substrate. The thickness of the grafted layer inside the SPG substrates could be controlled through the control of the mass of organic material bonded to the pore surface of the SPG substrate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 846–856, 2006     

双频超声交替强化超临界流体萃取装置的设计与应用

本文针对超临界流体萃取（SFE）系统设备的特点，设计丁可用于强化SFE过程的双频超声波交替强化装置。以香椿叶中黄酮类化合物为提取对象，对超声强化USFE过程的影响因素及强化效果进行了实验研究，结果表明；低频超声利于提取，频率为20kHz的超声强化的萃取率最大，38kHz的超声最小，两者交替的居于中间。     

On the connectedness of partially balanced block designs

The necessary and sufficient conditions for m-associate partially balanced block (PBB) designs to be connected are given. This generalizes the criterion for m-associate partially balanced incomplete block (PBIB) designs, which has originally been established by Ogawa, Ikeda and Kageyama (1984, Proceedings of the Seminar on Combinatorics and Applications, 248–255, Statistical Publishing Society, Calcutta).This work was partially supported by the Polish Academy of Sciences Grant No. MR I.1-2/2.     

热活化延迟荧光聚合物及其电致发光器件

热活化延迟荧光(TADF)聚合物,不仅具有小分子TADF材料高的激子利用效率特性,而且还具备分子多样性好、可溶液加工、低成本、以及易实现大面积柔性器件等诸多优势,在近几年受到广泛的关注并展现了良好的应用前景。本文从TADF聚合物分子设计原理、器件结构及发光机理出发,依据TADF聚合物的构筑方法不同,概括了其结构设计策略,详述了各种类型TADF聚合物的分子结构和光电性能及其在有机电致发光器件领域应用的研究进展,最后探讨了TADF聚合物存在的问题,并展望了其发展前景。     

光诱导[2+2]环加成在有机合成中的应用

综述了烯烃、二烯、烯酮双键和烯烃的分子间或分子内光环加成,总结了过去二十五年在有机合成中的研究成果。     

正交试验法优化CS汽化吸附条件

通过正交试验设计,优化了影响西埃斯(CS)标准样品管制备的参数:汽化温度、采样流速、采样时间。结果表明,CS标准样品管的最佳吸附条件为汽化吸附温度:260℃,采样N2流速:330mL/min,采样时间:15min。在15~1500ng范围内,色谱峰面积与进样量有良好的线性关系,线性相关系数为0.9995,检出限为6.0ng。     

新型聚丙烯酸酯类柴油降凝剂分子模型的建立及验证

在前期工作得出的正构烷烃含量与浊点、冷滤点、凝点的定量关系模型基础上，选择柴油降凝剂的基团对柴油降凝剂分子结构进行了设计，得出了设计模型。结果表明，将含氮基团引入柴油降凝剂可以显著提高柴油降凝剂的性能。根据设计模型合成了一系列聚丙烯酸单酯和混合酯柴油降凝剂，并通过对柴油降凝剂的性能测试结果和自行设计的计算程序对设计模型进行了验证，结果表明，从柴油正构烷烃含量对柴油降凝剂的配比进行设计是可行的。