Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

不同环大小分子筛对钼基分子筛催化剂上甲烷无氧芳构化反应的影响

 钼基分子筛催化剂，由于不同分子筛的孔道大小及孔道形状不同\r\n，对甲烷芳构化反应表现出不同的催化性能．具有8元环孔道结构的小\r\n孔ERS－7分子筛没有催化活性，说明甲烷的芳构化反应离不开分子筛孔\r\n道的择形作用，较小的孔道中不能生成苯等芳烃．具有10元环孔道结构\r\n的ZSM－5，ZSM－11和ZRP－1三种分子筛具有较好的催化性能，但由于\r\n其孔道大小及孔道形状的差别在催化行为上表现出一定的差异．具有1\r\n0元环和12元环孔道结构的MCM－22分子筛，尤其对苯等轻芳烃而言，催\r\n化性能最佳．具有12元环孔道结构的JQX－1以及中孔分子筛SBA－15，\r\n虽然具有一定的催化性能，但活性较低．研究结果表明，孔道大小与苯\r\n分子动态直径相近或孔道稍大的分子筛是催化甲烷芳构化反应的良好载\r\n体，孔道过大或过小都不利于苯和萘等芳烃的生成．     

碱性水蒸气处理的ZSM-5沸石酸性质及孔结构的影响

 采用XRD，NH3－TPD，比表面积和孔结构测定等研究了在不同温度下用含10％NH3的水蒸气处理时HZSM－5沸石n（Si）／n（Al）＝25）酸性质及孔结构的变化规律．结果表明，随着处理温度的提高，HZSM－5的结构未发生明显的变化；样品的总酸量下降很快，但弱酸分布量相对提高，而强酸分布量相对下降；提高处理温度，样品的比表面积和微孔体积减小，二次孔或中孔体积及外表面积有增大的趋势．     

高比表面积窄孔分布氧化铝的制备研究 Ⅰ.沉淀条件的影响

 以硫酸铝液为原料，以氨水、氢氧化钠和铝酸钠为碱沉淀剂，采用pH摆动法制备了高比表面积、大孔径、窄孔分布、大孔体积氧化铝，考察了沉淀剂、沉淀温度及沉淀时酸侧pH值对氧化铝物性的影响，并对pH摆动法与等pH沉淀法的结果进行了比较．结果表明，通过改变制备参数可以获得高比表面积、大孔体积的氧化铝，当沉淀温度为70℃，pH摆动3或4次时，氧化铝的孔体积可高达1．0ml／g，比表面积仍大于300m2／g．用pH摆动法制得的样品比用等pH沉淀法制得的样品容易酸溶，对挤压成型有利．不同样品在酸溶液中的分散性表明，用氨水沉淀剂可获得相对较小的沉淀粒子．改变沉淀时酸侧的pH值，可导致沉淀粒子的结构发生变化．     

Mesoporous Titanium-containing Silicas. Synthesis and geometrical characteristics

Mesoporous titanium-containing silicas with TiO₂ contents from 1 up to 70 mol% were prepared. The obtained samples have been characterized by the powder X-ray diffraction data, the diffuse reflectance infrared Fourier transform method, and nitrogen adsorption at 77 K. Specific surface area, total pore volume, distribution pore volume on pore sizes were determined from nitrogen adsorption isotherm for synthesized titanosilicas. This revised version was published online in August 2006 with corrections to the Cover Date.     

Microbalance Techniques in Design and Control of Synthetic Carbons

Peculiarities of carbonization of two styrene/divinylbenzene precursors (one sulfonated, another aminated and phosphorylated) have been investigated by thermogravimetry and differential thermal analysis. It was shown that phosphorus compounds incorporate into carbon structure and cause delayed carbonization. Porous structure and surface properties of synthetic carbons have been investigated by standard (BET, α_s method, DA) and advanced (AED, PSD, regularization) methods from benzene and water adsorption isotherms. It was shown that phosphorus-containing carbon is less microporous and shows highly hydrophilic surface. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

New type of spherical pore Al alloy foam with low porosity and high strength

The Ultra Light Metal Structure with variouskinds of pores (open, close) realizes the lightness andmultifunction of structural material. The functionsinclude lightness (ρ < 1), high specific strength, highenergy absorption, sound insulation, heat insulationand electromagnetism shield. It is one of the hotspotsin material research nowadays[1— . The requirements 6]of high speed movement and high technology make Alalloy foam, which has higher specific st…     

Determination of Benzo(a)Pyrene and other Polynuclear Aromatic Hydrocarbons in Airborne Particulate Material by Ultrasonic Extraction and Reverse Phase High Pressure Liquid Chromatography

Abstract

Ultrasonic extraction of airborne particulate material on Hi-Vol filters is described. Almost all of the polar compounds are removed during the extraction by adsorption on the surface of the shredded glass fibers and controlled pore glass powder (CPG). The non-polar polynuclear aromatic hydrocarbons (PAH) in the extract are separated at room temperature by high pressure liquid chromatography (HPLC) on reverse phase Vydac using acetonitrile:water (70:30 v/v) as the chromatographic solvent. There is baseline separation of benzo(a)pyrene (BaP), benzo(k)fluoranthene (BkFt) and of benzo(e)pyrene (BeP), benzo(b)fluoranthene and perylene, the latter three present in one band. Extracts of airborne particulates show the same peaks. BaP elutes in approximately 14 minutes. Precision and accuracy measurements indicate full recovery of PAH and good extraction reproducibility. The detection limit of BaP at F 290/389 is less than 10 pg. Total analysis time is approximately 1 1/2 hr, most of which is waiting time.     

模拟混凝土孔隙液中D-葡萄糖酸钠复合缓蚀剂对钢筋的阻锈作用

应用电化学技术, 结合扫描电子显微镜(SEM)观测, 研究D-葡萄糖酸钠、钼酸钠和硫脲三组分复合缓蚀剂对模拟混凝土孔隙液中钢筋腐蚀行为的影响及其阻锈作用. 结果表明: 在含3.5% (w) NaCl的模拟混凝土孔隙液中, 复合缓蚀剂具有协同效应, 对钢筋有良好的阻锈作用. 当D-葡萄糖酸钠、钼酸钠和硫脲浓度分别为750、250和500 mg·L^-1时, 对钢筋的缓蚀效率可达到94.5%. 应用软硬酸碱(HSAB)理论分析缓蚀机理, 可认为三组分复合缓蚀剂在钢筋表面共同形成保护膜而阻止钢筋的腐蚀.