Correlation Between Structure and Transport Properties of Polymeric Membranes for Immunoisolation

Laboratory-made asymmetric polyurethane membranes designed for immunoisolation were investigated. Two types of EK and ES membranes were prepared in different spinning conditions. The membrane structure was characterised by the skin pore radius measurements using differential scanning calorimetry (DSC). Diffusive transport properties of membranes were determined by in vitro method for albumin and creatinine. The scanning electron microscopy (SEM) was applied to study the morphology of membranes. It has been found that the DSC technique is a useful tool for the evaluation of pore radii in the skin layer for PU membranes. Calculated pore radii were in the range from 1.95 to 2.47 nm for the EK and ES types. A correlation between the skin pore radii and the transport properties was not found in this case of investigated membranes. However, the transport properties data can serve for the estimation of selectivity of membranes. Thus, the selectivity of membranes for solutes of various molecular size was estimated from the D _m/D _w ratio of diffusion coefficients for albumin and creatinine. The SEM micrographs reveal the finger-like internal structure of capillary membranes, as well as various skin thickness. This revised version was published online in July 2006 with corrections to the Cover Date.     

Transient deformation and heat generation of solid polyurethane under impact compression

This investigation examines the transient deformation and heat generation of a solid polyurethane subjected to dynamic compression. A special method is presented to prepare the solid polyurethane from raw materials which are commonly used to make polyurethane foams. Testing methods including infrared spectrum, differential scanning calorimetry, quasi-static and dynamic compression were applied to study the basic physical properties of the solid polyurethane. High-speed optical and infrared imaging systems are used to obtain visual and thermo-graphic images during impact tests. Under quasi-static compression, the solid polyurethane presents a good performance in toughness. This is confirmed by its Poisson's ratio. Under impact compression, the adiabatic heat generation are identified statistically. Temperature distribution confirms the fact of transient heat generation in specimens. Adiabatic self-heating mechanism provides a consideration to understand the negative strain-rate effect and post-yield softening effect found in the solid polyurethane. Mechanical properties including quasi-static and dynamic responses are related with the composition of molecular and structure of polymer.     

Simultaneous measurement of viscoelastic changes and cell opening during processing of flexible polyurethane foam

A parallel-plate rheomete was constructed and used to study the development of dynamic shear modulus and cell opening under forced adiabatic conditions for a series of flexible slabstock polyurethane foams. Typical industrial formulations were used. The plates were heated to follow the adiabatic temperature profile of a real foam bun during foaming. The rheometer overcomes difficulties encountered in other methods such as heat loss and bubble damage caused by the probe.A four-stage modulus development profile was observed: initial bubble growth, bubble network, polymer stiffening and final curing. Chemical structure development was also studied under forced adiabatic conditions, using Fourier transform infrared spectroscopy. Polymer stiffening coincided with bidentate (hydrogen-bonded) urea formation.The normal force exerted by the expanding foam on the plates was found to be a function of the rate of foam expansion and the foam modulus. A sudden drop in the normal force typically coincides with the visually observed blow-off in the reacting foam bun, thus the normal force profile is a new and accurate indicator of cell opening. The normal force profile clearly shows that cell opening occurs just after the onset of polymer stiffening, thus illustrating the role of polymer rheology in the cell opening mechanism.Dedicated to the memory of Professor Tasos C. PapanastasiouPortions presented at the SPI Polyurethanes Technical/Marketing Conference, October 9–12, 1994, Boston, massachusetts, USA (Best paper award) and at the XIIth International Congress on Rheology, August 18–23, 1996, Québec City, Québec, Canada.     

单油酸三羟甲基丙烷酯改性水性聚氨酯

利用单油酸三羟甲基丙烷酯(TMPM)、异佛尔酮二异氰酸酯(IPDI)和聚氧化丙烯(PPG)等制备水性聚氨酯。采用透射电镜(TEM)、动态激光光散射(DLLS)、红外光谱(FT-IR)、热重分析(TGA)和表面张力仪表征了乳液胶束形态、产物结构及性能。结果表明:水性聚氨酯(PU)分子上引入脂肪侧链容易在水中形成规整的胶束,但TMPM改性的水性聚氨酯胶束粒径随TMPM含量的增加不断增大,当w(TMPM)=0.07时,乳液不稳定;脂肪侧链的引入降低了水性聚氨酯乳液的表面张力,表面张力随着反应体系中—NCO和—OH摩尔比的增大而降低,随交联度的增大先增加后减小;TMPM的引入可以提高胶膜的热稳定性。     

Simultaneous Determination of Cadmium,Lead, Copper and Mercury Ions Using Organofunctionalized SBA‐15 Nanostructured Silica Modified Graphite–Polyurethane Composite Electrode

A new sensor has been developed for the simultaneous detection of cadmium, lead, copper and mercury, using differential pulse and square wave anodic stripping voltammetry (DPASV and SWASV) at a graphite–polyurethane composite electrode with SBA‐15 silica organofunctionalized with 2‐benzothiazolethiol as bulk modifier. The heavy metal ions were preconcentrated on the surface of the modified electrode at ?1.1 V vs. SCE where they complex with 2‐benzothiazolethiol and are reduced to the metals, and are then reoxidized. Optimum SWASV conditions lead to nanomolar detection limits and simultaneous determination of Cd²⁺, Pb²⁺, Cu²⁺ and Hg²⁺ in natural waters was achieved.     

Preparation and properties of PU/MCMMT nanocomposites

The cetyltrimethyl ammonium bromide (CTAB) was used as a swelling agent to be intercalated into the galleries of the montmorillonite (MMT) platelets to get the organic MMT (CMMT). Then 4,4′‐diphenylmethane diisocyanate (MDI) were grafted on CMMT by the reaction between hydroxyls in organic MMT platelets and MDI to synthesize the MDI modified CMMT (MCMMT). Polyurethane (PU)/MCMMT composites were prepared by situ polymerization. The MCMMT platelets dispersed in a PU matrix in nanometer scale. The dispersion and intercalation degree of the MCMMT platelets decreased with increase in the content of MCMMT. Under the same content of fillers, the tensile strength and tear strength of PU/MCMMT nanocomposites were higher than those of PU/organic MMT nanocomposites. The reinforcing effect of the MCMMT platelets to the PU was better than that of the organic MMT platelets. With increase in the content of MCMMT, the tensile strength and tear strength of the PU/MCMMT nanocomposites were increased, while the extent of the increase slowed down. Compared with those of PU, the thermal stability of PU/MCMMT nanocomposites was increased. Copyright © 2009 John Wiley & Sons, Ltd.     

Efficient One-Step Passivation of Polyurethane Using Transurethanization

The uncontrolled accumulation of biological materials on the surface of medical devices through protein adsorption or cell adhesion causes adverse biological reactions in the living host system, leading to complications. In this study, poly(ethylene glycol) (PEG) is successfully grafted onto polyurethane (PU) surfaces by using a new strategy through a simple and efficient transurethanization reaction. The PEG hydroxyl group is deprotonated and then reacted with the PU surface to provide antiadhesive hydrophilic surfaces in a single step. Surface analysis techniques proved the grafting to be efficient and the formation of a hydrophilic polymeric layer at the surface of PU. Biological assays showed that the surface modification induced lower protein adsorption, cell, platelet, and bacterial adhesion than untreated surfaces, showing a potential for biomedical applications.     

Study of a novel porous gel polymer electrolyte based on TPU/PVdF by electrospinning technique

Investigation on a new electrospun gel polymer electrolyte consisting of thermoplastic polyurethane (TPU) and poly(vinylidene fluoride) (PVdF) has been made. Its characteristics were investigated by scanning electron microscopy, FT-IR, Differential Scanning Calorimeter (DSC) analysis. This kind of gel polymer electrolyte had a high ionic conductivity about 3.2 × 10^− 3 S cm^− 1 at room temperature, and exhibited a high electrochemical stability up to 5.0 V versus Li⁺/Li, good mechanical strength and stability to allow safe operation in rechargeable lithium-ion polymer batteries. A Li/GPE/LiFePO₄ cell delivered a high discharge capacity when it was evaluated at 0.1 °C—rate at 25 °C (167.8 mAh g^− 1). And a very stable cycle performance also existed under this low current density.     

Proton conductive polyimide ionomer membranes: Effect of NH,OH, and COOH groups

A new series of sulfonated polyimide (SPI) copolymers containing NH, OH, or COOH groups were synthesized by the polycondensation of 1,4,5,8‐naphthalnetetracarboxylic dianhydride, 3,3′‐bis(sulfopropoxy)‐4,4′‐diaminobiphenyl, and 3‐(4‐aminophenyl)‐5‐(3‐aminophenyl)‐1H‐1,2,4‐triazole (SPI‐8‐m), 3,5‐bis(4‐aminophenyl)‐1H‐1,2,4‐triazole (SPI‐8‐p), 3,6‐diaminocarbazole (SPI‐9), 3,5‐diamino‐1H‐1,2,4‐triazole (SPI‐10), bis(3‐aminopropyl)‐amine (SPI‐11), 2,6‐diaminopurine (SPI‐12), 2,4‐diamino‐6‐hydroxyprymidine (SPI‐13), or 3,5‐bis(4‐aminophenoxy)benzoic acid (SPI‐14). The obtained SPIs were soluble in polar organic solvents and gave tough and flexible membranes by solution casting. The SPI membranes having NH and COOH groups showed high thermal (decomposition temperature ≈200 °C) and mechanical (maximum stress >22 MPa) stability. Introducing NH groups, especially triazole and carbazole groups, was effective in improving proton conductive properties of SPI membranes at low humidity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2846–2854, 2010